Yamaha DM7-EX Flip-Ready Hydraulic Console Easy Retracting Lifting 1U Rack Space Flight Case with wheels by ZCASE

Overview

Introducing the ProX XZF-YDM7EX1ULMA, a hydraulic lift console case built specifically for the Yamaha DM7-EX and handcrafted in Poland by ZCASE®. Most large format console cases need two or more people to lift the desk onto a table or a stand, and that is the part of load in that wrecks backs and burns clock time. This one does not work that way. The console rides inside the case, and a gas powered rotational mechanism raises it into playing position with a single finger. One tech rolls it in, opens the lid, brings the desk up, and starts patching. For FOH engineers, monitor techs, rental houses, and touring production companies running the DM7-EX, that is the difference between a two person load in and a one person load in on every single show.

Single Operator Load In The XZF-YDM7EX1ULMA is made for easy transport and operation of Yamaha DM7-EX digital audio consoles. The patented ZCASE® rotational mechanism does the heavy work, so there is no lifting the desk out of a case and no wrestling it onto a stand. Roll the case to position, release the mechanism, and the console comes up smooth and controlled. Hydraulic lifting springs made in Germany carry the load and hold the desk steady once it is up.

Fader Level at 33.6 in. The console sits at a 33.6 in. fader height when raised, which puts the surface at a natural standing mix position. You are not hunched over a low table and you are not reaching up over your chest, and that matters over a long day of line check, soundcheck, and a two hour show.

Handcrafted in Poland by ZCASE® ProX is the North America distributor for ZCASE® hydraulic lift console cases. Every unit is built by hand and individually tested for quality assurance and functionality before it ships, and the case is TAA compliant. The mechanism is patent pending by ZCASE®.

3/8 in. Birch Heksa Plywood The case is built from 3/8 in. birch Heksa plywood in true ATA-300 style. Birch gives you a stiff, stable panel that holds hardware well and does not go soft after a season of ramps and truck packs, and the 3/8 in. thickness keeps the empty case down to 190 lbs so a single tech can still move it.

Signature Honeycomb Digital™ Surface The exterior carries our Signature Honeycomb Digital™ surface protected hexagonal pattern laminate that shrugs off the minor scuffs and scrapes that come with load in ramps and shared trucks. Standard finish is silver on black.

Steel Ball Corners and Locking Hardware The corners are heavy steel ball style with dual anchor rivets at every stress point. Recessed industrial butterfly twist lock latches keep the lid sealed in transit, and an easy locking fit aluminum tongue and groove valance lines the case up cleanly every time you close it. Rubber spring action recessed handles sit flush with the panel so nothing catches during a stack out.

Lockable Storage Compartment A dedicated lockable storage compartment measures 21.4 x 4.7 x 16.2 in. (W x D x H). That is real, secure space for your show drive, headphones, talkback mic, adapters, and the small items that tend to disappear between dates. For rental houses and shared crews, a lock on that compartment is worth more than it sounds.

5.9 in. Doghouse with Side Cable Routing The doghouse runs 5.9 in. deep with left and right side openings, so you can dress your network, snake, and power lines out of the case cleanly without pinching anything in the lid or leaving it propped open.

1U Rack Space Under the Console One rack space sits under the console for a wireless receiver, an audio interface, a network switch, or whatever your show file needs living next to the desk. Everything travels together in one case, so there is nothing to remember and nothing to lose between dates.

Laptop and Monitor Support A single arm holder mounts a laptop or a display right at the work position, which is where most engineers want their show file, tracking playback, or a second screen during a mix.

New Shock Absorbent System The case uses a new shock absorbent suspension and vibro insulation system that isolates the console from road vibration and impact while the case is closed and moving. The desk is protected on the truck, not just when the lid is shut.

Mobility and Transport The case rolls on four industrial-grade Self Centric Auto Centering 4" casters keep this case rolling straight and steady across any surface.  Self centering casters use a spring in the wheel stem to automatically straighten the wheel forward when there is no weight on it, so the case rolls straight the moment you push it instead of fighting sideways wheels first.  Self centering casters use a spring in the wheel stem to automatically straighten the wheel forward when there is no weight on it, so the case rolls straight the moment you push it instead of fighting sideways wheels first. 

Built for the Yamaha DM7-EX The case is designed around the Yamaha DM7-EX and supports the CTL DM7 Expansion. It fits the desk properly, holds it securely, and presents it at a working height that lets you mix comfortably through a full production day.

Specifications Outer dimensions measure 48.5 x 19.6 x 42.6 in. (W x D x H). Empty case weight is 190 lbs. Fader level sits at 33.6 in. Storage compartment measures 21.4 x 4.7 x 16.2 in. Doghouse depth is 5.9 in. Rack space is 1x 1U. UPC is 804589619048.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XZF-YDM7EX1ULMA is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Hydraulic Lift Console Case for Yamaha DM7-EX Patented ZCASE® rotational mechanism raises the console into playing position with one finger, no second person needed
• Hydraulic Lifting Springs Made in Germany Carry the console load and hold the desk steady once raised
• Fader Level at 33.6 in. Natural standing mix height, no hunching over a low table
• Handcrafted in Poland by ZCASE® Individually tested for quality assurance and functionality, TAA compliant
• ATA-300 Style Build in 3/8 in. Birch Heksa Plywood Stiff, stable panels that hold hardware and take repeated truck packs
• Signature Honeycomb Digital™ Laminate Hexagonal pattern surface protection against scuffs and scrapes, silver on black finish
• Heavy Steel Ball Corners with Dual Anchor Rivets Reinforced at every stress point
• Recessed Industrial Butterfly Twist Lock Latches Secure closure that stays sealed in transit
• Easy Locking Fit Aluminum Tongue and Groove Clean, repeatable lid alignment on every close
• Rubber Spring Action Recessed Handles Flush mounted so nothing snags during load in
• 4x Self Centric - 4" Auto Centering Industrial Casters Rolls straight and steady across any surface - auto centers positioning
• New Shock Absorbent Suspension and Vibro Insulation Isolates the console from road vibration and impact in transit
• Lockable Storage Compartment 21.4 x 4.7 x 16.2 in. of secure space for drives, headphones, and small accessories
• 5.9 in. Doghouse with Side Cable Routing Left and right openings for network, snake, and power lines without pinching
• 1x 1U Rack Space Under Console Onboard space for a receiver, interface, or network switch
• Arm Holder for Laptop or Screen Mounts a display or laptop at the work position
• Supports CTL DM7 Expansion Compatible with the DM7 expansion control surface
• Outer Dimensions 48.5 x 19.6 x 42.6 in. (W x D x H), empty case weight 190 lbs
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Yamaha DM7-EX Series Mixing Console

Compatibility

Yamaha DM7-EX Series Mixing Console

Product details

Introducing the ProX XZF-YDM7EX1ULMA, a hydraulic lift console case built specifically for the Yamaha DM7-EX and handcrafted in Poland by ZCASE®. Most large format console cases need two or more people to lift the desk onto a table or a stand, and that is the part of load in that wrecks backs and burns clock time. This one does not work that way. The console rides inside the case, and a gas powered rotational mechanism raises it into playing position with a single finger. One tech rolls it in, opens the lid, brings the desk up, and starts patching. For FOH engineers, monitor techs, rental houses, and touring production companies running the DM7-EX, that is the difference between a two person load in and a one person load in on every single show.

Single Operator Load In The XZF-YDM7EX1ULMA is made for easy transport and operation of Yamaha DM7-EX digital audio consoles. The patented ZCASE® rotational mechanism does the heavy work, so there is no lifting the desk out of a case and no wrestling it onto a stand. Roll the case to position, release the mechanism, and the console comes up smooth and controlled. Hydraulic lifting springs made in Germany carry the load and hold the desk steady once it is up.

Fader Level at 33.6 in. The console sits at a 33.6 in. fader height when raised, which puts the surface at a natural standing mix position. You are not hunched over a low table and you are not reaching up over your chest, and that matters over a long day of line check, soundcheck, and a two hour show.

Handcrafted in Poland by ZCASE® ProX is the North America distributor for ZCASE® hydraulic lift console cases. Every unit is built by hand and individually tested for quality assurance and functionality before it ships, and the case is TAA compliant. The mechanism is patent pending by ZCASE®.

3/8 in. Birch Heksa Plywood The case is built from 3/8 in. birch Heksa plywood in true ATA-300 style. Birch gives you a stiff, stable panel that holds hardware well and does not go soft after a season of ramps and truck packs, and the 3/8 in. thickness keeps the empty case down to 190 lbs so a single tech can still move it.

Signature Honeycomb Digital™ Surface The exterior carries our Signature Honeycomb Digital™ surface protected hexagonal pattern laminate that shrugs off the minor scuffs and scrapes that come with load in ramps and shared trucks. Standard finish is silver on black.

Steel Ball Corners and Locking Hardware The corners are heavy steel ball style with dual anchor rivets at every stress point. Recessed industrial butterfly twist lock latches keep the lid sealed in transit, and an easy locking fit aluminum tongue and groove valance lines the case up cleanly every time you close it. Rubber spring action recessed handles sit flush with the panel so nothing catches during a stack out.

Lockable Storage Compartment A dedicated lockable storage compartment measures 21.4 x 4.7 x 16.2 in. (W x D x H). That is real, secure space for your show drive, headphones, talkback mic, adapters, and the small items that tend to disappear between dates. For rental houses and shared crews, a lock on that compartment is worth more than it sounds.

5.9 in. Doghouse with Side Cable Routing The doghouse runs 5.9 in. deep with left and right side openings, so you can dress your network, snake, and power lines out of the case cleanly without pinching anything in the lid or leaving it propped open.

1U Rack Space Under the Console One rack space sits under the console for a wireless receiver, an audio interface, a network switch, or whatever your show file needs living next to the desk. Everything travels together in one case, so there is nothing to remember and nothing to lose between dates.

Laptop and Monitor Support A single arm holder mounts a laptop or a display right at the work position, which is where most engineers want their show file, tracking playback, or a second screen during a mix.

New Shock Absorbent System The case uses a new shock absorbent suspension and vibro insulation system that isolates the console from road vibration and impact while the case is closed and moving. The desk is protected on the truck, not just when the lid is shut.

Mobility and Transport The case rolls on four industrial-grade Self Centric Auto Centering 4" casters keep this case rolling straight and steady across any surface.  Self centering casters use a spring in the wheel stem to automatically straighten the wheel forward when there is no weight on it, so the case rolls straight the moment you push it instead of fighting sideways wheels first.  Self centering casters use a spring in the wheel stem to automatically straighten the wheel forward when there is no weight on it, so the case rolls straight the moment you push it instead of fighting sideways wheels first. 

Built for the Yamaha DM7-EX The case is designed around the Yamaha DM7-EX and supports the CTL DM7 Expansion. It fits the desk properly, holds it securely, and presents it at a working height that lets you mix comfortably through a full production day.

Specifications Outer dimensions measure 48.5 x 19.6 x 42.6 in. (W x D x H). Empty case weight is 190 lbs. Fader level sits at 33.6 in. Storage compartment measures 21.4 x 4.7 x 16.2 in. Doghouse depth is 5.9 in. Rack space is 1x 1U. UPC is 804589619048.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XZF-YDM7EX1ULMA is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Hydraulic Lift Console Case for Yamaha DM7-EX Patented ZCASE® rotational mechanism raises the console into playing position with one finger, no second person needed
• Hydraulic Lifting Springs Made in Germany Carry the console load and hold the desk steady once raised
• Fader Level at 33.6 in. Natural standing mix height, no hunching over a low table
• Handcrafted in Poland by ZCASE® Individually tested for quality assurance and functionality, TAA compliant
• ATA-300 Style Build in 3/8 in. Birch Heksa Plywood Stiff, stable panels that hold hardware and take repeated truck packs
• Signature Honeycomb Digital™ Laminate Hexagonal pattern surface protection against scuffs and scrapes, silver on black finish
• Heavy Steel Ball Corners with Dual Anchor Rivets Reinforced at every stress point
• Recessed Industrial Butterfly Twist Lock Latches Secure closure that stays sealed in transit
• Easy Locking Fit Aluminum Tongue and Groove Clean, repeatable lid alignment on every close
• Rubber Spring Action Recessed Handles Flush mounted so nothing snags during load in
• 4x Self Centric - 4" Auto Centering Industrial Casters Rolls straight and steady across any surface - auto centers positioning
• New Shock Absorbent Suspension and Vibro Insulation Isolates the console from road vibration and impact in transit
• Lockable Storage Compartment 21.4 x 4.7 x 16.2 in. of secure space for drives, headphones, and small accessories
• 5.9 in. Doghouse with Side Cable Routing Left and right openings for network, snake, and power lines without pinching
• 1x 1U Rack Space Under Console Onboard space for a receiver, interface, or network switch
• Arm Holder for Laptop or Screen Mounts a display or laptop at the work position
• Supports CTL DM7 Expansion Compatible with the DM7 expansion control surface
• Outer Dimensions 48.5 x 19.6 x 42.6 in. (W x D x H), empty case weight 190 lbs
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.