Yamaha DM5 Flip-Ready Console Case with 2U Rack Space by ZCASE

Overview

Featuring the ProX XZF-YDM5LMA1U Flip-Ready™ Console Case Work Platform for Yamaha DM5 with 2U Rack by ZCASE®. Every engineer knows the routine at the start of a show. Unlatch the case, find a second set of hands, lift a heavy console out, and hope the table at the venue is the right height. The ProX DM5 FLIP cuts that whole step out. Its flip mechanism rotates your Yamaha DM5 straight into working position without ever lifting it out of the case, so one person can go from load in to soundcheck in minutes. Your rack gear, cables, monitor and accessories all ride along and are ready the moment the console flips up, giving you a clean, organized mix position at every gig.

Handcrafted by ZCASE® The ProX DM5 FLIP is built by ZCASE®, the maker of the Flip-Ready™ case line distributed in North America by ProX. ZCASE builds these cases to order, with custom plywood colors, an all black hardware finish, logo engraving and custom interior layouts available on request. That means your case can match your company look or your rig exactly, not just fit the console.

Removable Lid and Recessed Hardware The lid comes off completely, so it stays out of your way at the mix position instead of hanging off the side of the case. Recessed butterfly latches and recessed carrying handles sit flush with the case walls, which keeps them from snagging on truck walls, doorways and other cases during load in. Heavy-duty hardware throughout and a recessed label dish round out a shell built for regular touring.

Flip-Ready™ Mechanism with Adjustable Fader Height The flip mechanism moves the console from its transport position to its working position with no lifting required. Fader working height adjusts to 35.4", 37.4" or 39.4", so you can set the board for sitting or standing and stay comfortable through a long show. A comfortable engineer makes fewer mistakes, and that matters when you are mixing for hours.

Detachable Console Bed When a gig calls for the console outside the case, the console bed detaches with the board still mounted. Integrated carrying handles on the bed make it easy to move the console to a table or other support, then drop it back into the case when the show is over.

Built-In Workstation Two adjustable arms accept VESA monitor mounts or laptop platforms, so your screens sit right where you need them without a separate stand. Two mouse pad holders come with mouse pads included. A slide-out microphone holder keeps your talkback mic close, and a slide-out headphone holder gives your cans a home instead of a spot on top of the faders.

Two-Piece Doghouse and Connector Cutouts The two-piece doghouse is 5.9" deep, giving you real room to route and store cables behind the console. Six D-size cutouts accept REAN® by NEUTRIK® D-size connectors, so you can build a clean connector panel and keep patching quick and tidy at every venue.

2U Rack Space Under the Console A 2U rack section sits under the console bed with front and rear access. Mount a stage box interface, wireless receiver, network switch or power distribution right below the board, and keep it wired and ready to go from one show to the next. Front and rear access means you can patch and service the gear without pulling it out.

Padded Storage Compartment High-density protective foam padding protects the console during transport. A foam and felt-lined storage compartment measuring 21.5" x 3.1" x 13.2" holds accessories that would otherwise end up loose in a bin. Hook-and-loop straps secure the laptop platform inside the case, so nothing shifts on the road.

Self-Aligning Locking Wheels Four 4" heavy-duty self-aligning wheels carry the case, and all four have brakes. The self-aligning design helps the case track straight across stage floors and ramps, and four brakes mean the mix position stays put once it is set up.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX DM5 FLIP is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Flip-Ready™ Mechanism Rotates the Yamaha DM5 into working position with no lifting
• Adjustable Fader Height Set to 35.4", 37.4" or 39.4"
• Handcrafted by ZCASE® Custom colors, all black hardware, logo engraving and custom interiors available on request
• Removable Lid Comes off completely for a clean mix position
• Recessed Butterfly Latches and Handles Flush mounted to prevent snagging
• Heavy-Duty Hardware Built for regular touring
• Recessed Label Dish For case ID and labeling
• Detachable Console Bed Integrated carrying handles for use outside the case
• 2x Adjustable Arms For VESA monitor mounts or laptop platforms
• 2x Mouse Pad Holders Mouse pads included
• Slide-Out Microphone Holder Keeps talkback mic within reach
• Slide-Out Headphone Holder Dedicated spot for headphones
• Two-Piece Doghouse 5.9" deep for cable routing and storage
• 6x D-Size Cutouts For REAN® by NEUTRIK® D-size connectors
• 2U Rack Space Under the console bed with front and rear access
• High-Density Foam Padding Protects the console in transit
• Foam and Felt-Lined Storage Compartment 21.5" x 3.1" x 13.2"
• Hook-and-Loop Straps Secure the laptop platform inside the case
• 4x 4" Self-Aligning Wheels Heavy-duty, all with brakes
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Featuring the ProX XZF-YDM5LMA1U Flip-Ready™ Console Case Work Platform for Yamaha DM5 with 2U Rack by ZCASE®. Every engineer knows the routine at the start of a show. Unlatch the case, find a second set of hands, lift a heavy console out, and hope the table at the venue is the right height. The ProX DM5 FLIP cuts that whole step out. Its flip mechanism rotates your Yamaha DM5 straight into working position without ever lifting it out of the case, so one person can go from load in to soundcheck in minutes. Your rack gear, cables, monitor and accessories all ride along and are ready the moment the console flips up, giving you a clean, organized mix position at every gig.

Handcrafted by ZCASE® The ProX DM5 FLIP is built by ZCASE®, the maker of the Flip-Ready™ case line distributed in North America by ProX. ZCASE builds these cases to order, with custom plywood colors, an all black hardware finish, logo engraving and custom interior layouts available on request. That means your case can match your company look or your rig exactly, not just fit the console.

Removable Lid and Recessed Hardware The lid comes off completely, so it stays out of your way at the mix position instead of hanging off the side of the case. Recessed butterfly latches and recessed carrying handles sit flush with the case walls, which keeps them from snagging on truck walls, doorways and other cases during load in. Heavy-duty hardware throughout and a recessed label dish round out a shell built for regular touring.

Flip-Ready™ Mechanism with Adjustable Fader Height The flip mechanism moves the console from its transport position to its working position with no lifting required. Fader working height adjusts to 35.4", 37.4" or 39.4", so you can set the board for sitting or standing and stay comfortable through a long show. A comfortable engineer makes fewer mistakes, and that matters when you are mixing for hours.

Detachable Console Bed When a gig calls for the console outside the case, the console bed detaches with the board still mounted. Integrated carrying handles on the bed make it easy to move the console to a table or other support, then drop it back into the case when the show is over.

Built-In Workstation Two adjustable arms accept VESA monitor mounts or laptop platforms, so your screens sit right where you need them without a separate stand. Two mouse pad holders come with mouse pads included. A slide-out microphone holder keeps your talkback mic close, and a slide-out headphone holder gives your cans a home instead of a spot on top of the faders.

Two-Piece Doghouse and Connector Cutouts The two-piece doghouse is 5.9" deep, giving you real room to route and store cables behind the console. Six D-size cutouts accept REAN® by NEUTRIK® D-size connectors, so you can build a clean connector panel and keep patching quick and tidy at every venue.

2U Rack Space Under the Console A 2U rack section sits under the console bed with front and rear access. Mount a stage box interface, wireless receiver, network switch or power distribution right below the board, and keep it wired and ready to go from one show to the next. Front and rear access means you can patch and service the gear without pulling it out.

Padded Storage Compartment High-density protective foam padding protects the console during transport. A foam and felt-lined storage compartment measuring 21.5" x 3.1" x 13.2" holds accessories that would otherwise end up loose in a bin. Hook-and-loop straps secure the laptop platform inside the case, so nothing shifts on the road.

Self-Aligning Locking Wheels Four 4" heavy-duty self-aligning wheels carry the case, and all four have brakes. The self-aligning design helps the case track straight across stage floors and ramps, and four brakes mean the mix position stays put once it is set up.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX DM5 FLIP is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Flip-Ready™ Mechanism Rotates the Yamaha DM5 into working position with no lifting
• Adjustable Fader Height Set to 35.4", 37.4" or 39.4"
• Handcrafted by ZCASE® Custom colors, all black hardware, logo engraving and custom interiors available on request
• Removable Lid Comes off completely for a clean mix position
• Recessed Butterfly Latches and Handles Flush mounted to prevent snagging
• Heavy-Duty Hardware Built for regular touring
• Recessed Label Dish For case ID and labeling
• Detachable Console Bed Integrated carrying handles for use outside the case
• 2x Adjustable Arms For VESA monitor mounts or laptop platforms
• 2x Mouse Pad Holders Mouse pads included
• Slide-Out Microphone Holder Keeps talkback mic within reach
• Slide-Out Headphone Holder Dedicated spot for headphones
• Two-Piece Doghouse 5.9" deep for cable routing and storage
• 6x D-Size Cutouts For REAN® by NEUTRIK® D-size connectors
• 2U Rack Space Under the console bed with front and rear access
• High-Density Foam Padding Protects the console in transit
• Foam and Felt-Lined Storage Compartment 21.5" x 3.1" x 13.2"
• Hook-and-Loop Straps Secure the laptop platform inside the case
• 4x 4" Self-Aligning Wheels Heavy-duty, all with brakes
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.