Top Loading Lifting tower - Capacity 496 lbs Max Height 21.06 ft - Made in Spain by Fantek

Overview

Introducing the ProX XTF-T106D Top Loading Lifting Tower by Fantek. When the rig has to go high and the load is heavy, you need a tower you can trust to hold it there all night. This top loading lifting tower raises up to 496 lbs to a maximum height of 21.06 ft, giving rental houses, production companies, and install crews the reach to fly truss and lighting well above the stage without bringing in motors or overhead rigging points. It is built from steel, locks itself at height, and levels on rough ground, so the same tower works in a ballroom on Friday and on a festival field on Saturday.

496 lbs Capacity at 21.06 ft The ProX T106D carries a maximum load of 496.04 lbs and lifts it to 21.06 ft. That combination covers a wide range of mid size and large event work, from long truss spans loaded with fixtures to tall ground supported looks that smaller stands cannot reach. The minimum working load is 55.12 lbs.

Five Section Telescopic Steel Mast The mast is made of five extensible steel profiles that telescope out of each other as the tower rises. Steel construction gives the mast the stiffness a load at this height calls for, and the five section design is what lets a tower that folds down to 6.03 ft extend past 21 ft.

High-Strength Steel Cable and SELOIL Bearing Pulleys Lifting is handled by a high-strength steel cable running over ribbed driven pulleys fitted with SELOIL bearings. The ribbed pulleys keep the cable seated and tracking correctly as the sections extend, so the lift stays smooth and controlled from the first turn to full height.

1,984 lbs Rated Winch The winch is rated at 1,984.16 lbs, about four times the maximum working load of the tower. That margin matters when you are raising several hundred pounds of gear above a stage.

Automatic Locking Steel Pins As the tower rises, automatic locking steel pins fix each section at the height you want. The load is held by steel, not by the operator, so the tower stays where you set it for the length of the show.

Leveling Legs with Non-Slip Rubber Feet The legs open to a 6 ft diameter base and finish in non-slip rubber feet. Built in levelers let you set the tower true on uneven terrain, which is the difference between a safe lift and a risky one at outdoor events, on sloped floors, and on older venue surfaces.

Folds to 6.03 ft for Transport Folded down, the ProX T106D stands 6.03 ft tall and measures 69" H x 18" W x 18" L at a weight of 210 lbs. It rolls into a truck or stores upright in the shop without taking up floor space a larger ground support system would need.

Pairs with the XTF-ATCMOB Truss Adapter For truss work, add the ProX XTF-ATCMOB Universal Truss Bracket Adjustable T-Adapter, made for Fantek top loading lifting towers, to mount truss on top of the tower.

Specifications The ProX T106D reaches a maximum height of 21.06 ft and has a minimum height of 6.03 ft, which is also its folded height. It handles a maximum load of 496.04 lbs with a minimum load of 55.12 lbs. The base opens to a 6 ft diameter when unfolded. The mast is built in 5 sections, and the winch is rated at 1,984.16 lbs.

Made in Spain by Fantek Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX T106D is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• 496 lbs Maximum Load Lifts heavy truss and lighting loads with a 55.12 lbs minimum load
• 21.06 ft Maximum Height Tall reach for ground supported rigs
• Top Loading Design Load mounts at the top of the mast for vertical lifting
• Five Section Steel Mast Extensible steel profiles telescope from 6.03 ft folded
• High-Strength Steel Cable Drives the lift through every section
• Ribbed Driven Pulleys with SELOIL Bearings Smooth, controlled cable travel
• 1,984.16 lbs Rated Winch About four times the maximum working load
• Automatic Locking Steel Pins Fix each section at the desired height
• 6 ft Diameter Base Wide unfolded footprint for stability
• Leg Levelers Set the tower true on uneven terrain
• Non-Slip Rubber Feet Grip on smooth and rough surfaces
• Compatible with XTF-ATCMOB Universal truss bracket T-adapter sold separately
• Made in Spain by Fantek Distributed in North America by ProX Live Performance Gear
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XTF-T106D Top Loading Lifting Tower by Fantek. When the rig has to go high and the load is heavy, you need a tower you can trust to hold it there all night. This top loading lifting tower raises up to 496 lbs to a maximum height of 21.06 ft, giving rental houses, production companies, and install crews the reach to fly truss and lighting well above the stage without bringing in motors or overhead rigging points. It is built from steel, locks itself at height, and levels on rough ground, so the same tower works in a ballroom on Friday and on a festival field on Saturday.

496 lbs Capacity at 21.06 ft The ProX T106D carries a maximum load of 496.04 lbs and lifts it to 21.06 ft. That combination covers a wide range of mid size and large event work, from long truss spans loaded with fixtures to tall ground supported looks that smaller stands cannot reach. The minimum working load is 55.12 lbs.

Five Section Telescopic Steel Mast The mast is made of five extensible steel profiles that telescope out of each other as the tower rises. Steel construction gives the mast the stiffness a load at this height calls for, and the five section design is what lets a tower that folds down to 6.03 ft extend past 21 ft.

High-Strength Steel Cable and SELOIL Bearing Pulleys Lifting is handled by a high-strength steel cable running over ribbed driven pulleys fitted with SELOIL bearings. The ribbed pulleys keep the cable seated and tracking correctly as the sections extend, so the lift stays smooth and controlled from the first turn to full height.

1,984 lbs Rated Winch The winch is rated at 1,984.16 lbs, about four times the maximum working load of the tower. That margin matters when you are raising several hundred pounds of gear above a stage.

Automatic Locking Steel Pins As the tower rises, automatic locking steel pins fix each section at the height you want. The load is held by steel, not by the operator, so the tower stays where you set it for the length of the show.

Leveling Legs with Non-Slip Rubber Feet The legs open to a 6 ft diameter base and finish in non-slip rubber feet. Built in levelers let you set the tower true on uneven terrain, which is the difference between a safe lift and a risky one at outdoor events, on sloped floors, and on older venue surfaces.

Folds to 6.03 ft for Transport Folded down, the ProX T106D stands 6.03 ft tall and measures 69" H x 18" W x 18" L at a weight of 210 lbs. It rolls into a truck or stores upright in the shop without taking up floor space a larger ground support system would need.

Pairs with the XTF-ATCMOB Truss Adapter For truss work, add the ProX XTF-ATCMOB Universal Truss Bracket Adjustable T-Adapter, made for Fantek top loading lifting towers, to mount truss on top of the tower.

Specifications The ProX T106D reaches a maximum height of 21.06 ft and has a minimum height of 6.03 ft, which is also its folded height. It handles a maximum load of 496.04 lbs with a minimum load of 55.12 lbs. The base opens to a 6 ft diameter when unfolded. The mast is built in 5 sections, and the winch is rated at 1,984.16 lbs.

Made in Spain by Fantek Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX T106D is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• 496 lbs Maximum Load Lifts heavy truss and lighting loads with a 55.12 lbs minimum load
• 21.06 ft Maximum Height Tall reach for ground supported rigs
• Top Loading Design Load mounts at the top of the mast for vertical lifting
• Five Section Steel Mast Extensible steel profiles telescope from 6.03 ft folded
• High-Strength Steel Cable Drives the lift through every section
• Ribbed Driven Pulleys with SELOIL Bearings Smooth, controlled cable travel
• 1,984.16 lbs Rated Winch About four times the maximum working load
• Automatic Locking Steel Pins Fix each section at the desired height
• 6 ft Diameter Base Wide unfolded footprint for stability
• Leg Levelers Set the tower true on uneven terrain
• Non-Slip Rubber Feet Grip on smooth and rough surfaces
• Compatible with XTF-ATCMOB Universal truss bracket T-adapter sold separately
• Made in Spain by Fantek Distributed in North America by ProX Live Performance Gear
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.