Top Loading Truss Lifting Tower - Capacity 220 lbs Max Height 12.47 ft - Made in Spain by Fantek

Overview

Introducing the ProX XTF-T101D Top Loading Truss Lifting Tower by Fantek. When a show needs truss, lighting or speakers in the air and there is no rigging point overhead, the lift has to come from the ground, and it has to be a lift you can trust in front of a client. This manual winch tower raises up to 220 lbs to a maximum height of 12.47 ft, then folds down to under 5 ft so it fits in the vehicle you already drive to the gig. Made in Spain by Fantek from steel and certified to CE, DGUV, BGV C1 and BGG 912 standards, it gives mobile DJs, production companies, rental houses, venues and houses of worship a compact ground support tower built for real working loads.

Top Loading Design The load sits at the top of the mast, so the weight pushes straight down through the tower. That is what makes this style of tower the right pick for vertical loads like truss spans, lighting bars and speakers. Pair it with the ProX XTF-ATCMOB Universal Truss Bracket Adjustable T-Adapter to mount truss on top of the tower.

Three Section Telescopic Steel Mast Three extensible steel profiles slide out of each other to take the tower from a 4.59 ft minimum height up to 12.47 ft. Steel keeps the mast rigid under load, which matters when your rig is hanging over a dance floor or a stage.

Steel Cable and Pulley Lift System A high strength steel cable runs over grooved pulleys fitted with SELOIL bearings. The pulleys guide the cable cleanly as each section rises, so the lift stays smooth and controlled from the first turn of the handle to the last.

Automatic Locking Pins Self locking steel pins fix the tower at the height you want. Once the pins engage, the mast is held mechanically in place, so you are not relying on the winch alone to hold your gear up through the whole event.

Manual Winch The entire system is operated by a manual winch rated at 771.62 lbs. One person can raise and lower the load by hand, with no power needed at the tower position.

Wide Base with Non-Slip Rubber Feet The legs open to a base of about 5.25 x 5.25 ft and sit on non-slip rubber feet. A wide stance keeps the tower planted, and the rubber feet grip the floor without marking it.

Compact for Transport With the legs folded, the base packs down to just 0.75 x 0.92 ft. That small footprint lets you slide the tower in beside your cases and truss, and store it in a corner of the shop between jobs.

Certified and Made in Spain Fantek builds this tower in Spain to CE, DGUV, BGV C1 and BGG 912 standards. For rental houses and production crews, those certifications are often what a venue or safety officer asks to see first.

Specifications The ProX T101D reaches a maximum height of 12.47 ft and has a minimum height of 4.59 ft, which is also its folded height. It handles a maximum load of 220 lbs with a minimum load of 55.12 lbs. The base measures 5.25 x 5.25 ft unfolded and 0.75 x 0.92 ft folded. The mast is built in 3 sections, and the winch is rated at 771.62 lbs.

Standards and Certifications CE, DGUV, BGV C1, BGG 912
Made in Spain by Fantek

Use With ProX XTF-ATCMOB Universal Truss Bracket Adjustable T-Adapter for Top Load Center Lifting Towers
XTF-ATCOB | Mobile Support for truss and towers from T-1

Made in Spain by Fantek.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX T101D is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• 220 lbs Maximum Load Lifts truss, lighting and speakers from the ground
• 12.47 ft Maximum Height Raises from a 4.59 ft minimum height
• Top Loading Design Load sits on top of the mast for vertical lifting
• Three Section Telescopic Mast Extensible steel profiles
• High Strength Steel Cable Runs on grooved pulleys with SELOIL bearings
• Automatic Locking System Self locking steel pins hold the tower at the set height
• Manual Winch Rated at 771.62 lbs, operated by hand with no power needed
• Minimum Load 55.12 lbs
• Wide Leg Base Opens to about 5.25 x 5.25 ft
• Non-Slip Rubber Feet Grip the floor under each leg
• Compact Folded Base Packs down to 0.75 x 0.92 ft for transport and storage
• Certified CE, DGUV, BGV C1 and BGG 912
• Made in Spain by Fantek
• Use With ProX XTF-ATCMOB Universal Truss Bracket Adjustable T-Adapter
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XTF-T101D Top Loading Truss Lifting Tower by Fantek. When a show needs truss, lighting or speakers in the air and there is no rigging point overhead, the lift has to come from the ground, and it has to be a lift you can trust in front of a client. This manual winch tower raises up to 220 lbs to a maximum height of 12.47 ft, then folds down to under 5 ft so it fits in the vehicle you already drive to the gig. Made in Spain by Fantek from steel and certified to CE, DGUV, BGV C1 and BGG 912 standards, it gives mobile DJs, production companies, rental houses, venues and houses of worship a compact ground support tower built for real working loads.

Top Loading Design The load sits at the top of the mast, so the weight pushes straight down through the tower. That is what makes this style of tower the right pick for vertical loads like truss spans, lighting bars and speakers. Pair it with the ProX XTF-ATCMOB Universal Truss Bracket Adjustable T-Adapter to mount truss on top of the tower.

Three Section Telescopic Steel Mast Three extensible steel profiles slide out of each other to take the tower from a 4.59 ft minimum height up to 12.47 ft. Steel keeps the mast rigid under load, which matters when your rig is hanging over a dance floor or a stage.

Steel Cable and Pulley Lift System A high strength steel cable runs over grooved pulleys fitted with SELOIL bearings. The pulleys guide the cable cleanly as each section rises, so the lift stays smooth and controlled from the first turn of the handle to the last.

Automatic Locking Pins Self locking steel pins fix the tower at the height you want. Once the pins engage, the mast is held mechanically in place, so you are not relying on the winch alone to hold your gear up through the whole event.

Manual Winch The entire system is operated by a manual winch rated at 771.62 lbs. One person can raise and lower the load by hand, with no power needed at the tower position.

Wide Base with Non-Slip Rubber Feet The legs open to a base of about 5.25 x 5.25 ft and sit on non-slip rubber feet. A wide stance keeps the tower planted, and the rubber feet grip the floor without marking it.

Compact for Transport With the legs folded, the base packs down to just 0.75 x 0.92 ft. That small footprint lets you slide the tower in beside your cases and truss, and store it in a corner of the shop between jobs.

Certified and Made in Spain Fantek builds this tower in Spain to CE, DGUV, BGV C1 and BGG 912 standards. For rental houses and production crews, those certifications are often what a venue or safety officer asks to see first.

Specifications The ProX T101D reaches a maximum height of 12.47 ft and has a minimum height of 4.59 ft, which is also its folded height. It handles a maximum load of 220 lbs with a minimum load of 55.12 lbs. The base measures 5.25 x 5.25 ft unfolded and 0.75 x 0.92 ft folded. The mast is built in 3 sections, and the winch is rated at 771.62 lbs.

Standards and Certifications CE, DGUV, BGV C1, BGG 912
Made in Spain by Fantek

Use With ProX XTF-ATCMOB Universal Truss Bracket Adjustable T-Adapter for Top Load Center Lifting Towers
XTF-ATCOB | Mobile Support for truss and towers from T-1

Made in Spain by Fantek.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX T101D is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• 220 lbs Maximum Load Lifts truss, lighting and speakers from the ground
• 12.47 ft Maximum Height Raises from a 4.59 ft minimum height
• Top Loading Design Load sits on top of the mast for vertical lifting
• Three Section Telescopic Mast Extensible steel profiles
• High Strength Steel Cable Runs on grooved pulleys with SELOIL bearings
• Automatic Locking System Self locking steel pins hold the tower at the set height
• Manual Winch Rated at 771.62 lbs, operated by hand with no power needed
• Minimum Load 55.12 lbs
• Wide Leg Base Opens to about 5.25 x 5.25 ft
• Non-Slip Rubber Feet Grip the floor under each leg
• Compact Folded Base Packs down to 0.75 x 0.92 ft for transport and storage
• Certified CE, DGUV, BGV C1 and BGG 912
• Made in Spain by Fantek
• Use With ProX XTF-ATCMOB Universal Truss Bracket Adjustable T-Adapter
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.