3ft SpanSet slings truss rigging SteelTex™ Round Stage with aircraft steel cable inside - Made in USA

Overview

Introducing the ProX XT-SLINGR03 3ft SpanSet SteelTex™ Round Sling. When you fly lights, speakers or truss over a crowd, the sling holding it all up has to be strong, easy to inspect and nearly invisible from the seats. The ProX SLINGR03 handles all three. It’s a 3 ft SpanSet SteelTex™ round sling built around a galvanized steel aircraft cable core and wrapped in a heavy black double wall polyester cover that disappears against a dark rig. This is the GAC (Galvanized Aircraft Cable) sling you’ll find at nearly every venue and event where rigging gets hung, and it’s Made in USA by SpanSet. If your crew is hanging truss, hoists or line arrays, this is the sling that belongs in the rigging bag.

Black Double Wall Polyester Cover The outside of the ProX SLINGR03 is a heavy black polyester jacket with a double wall build. The black finish helps the sling blend into the rig, so the audience sees the show and not the hardware holding it up. It also stays lightweight, soft and pliable, which makes it easy to wrap around a truss chord, handle overhead and pack away at the end of the night.

Wide Inspection Window Right beside the capacity tag sits a wide inspection window with a hook and loop closure. Open it up and you can look straight at the core to check for broken wires or corrosion. That matters because a sling should be checked before every use, and this window lets your crew do it fast without guessing what’s going on under the cover.

Dark Color Capacity Tag The capacity tag uses a dark color so it stays low profile on a black rig while still keeping the rating information with the sling. Always read the tag and confirm the Working Load Limit (W.L.L) before you rig.

Galvanized Aircraft Cable Core Inside, the load bearing member is galvanized steel aircraft cable wound in an endless configuration for lifting strength. The galvanized finish helps protect the steel, and the endless wind means there’s no single splice point carrying the load.

3 ft Length with Matched Consistency The ProX SLINGR03 is a 3 ft sling, and SpanSet keeps lengths consistently matched. So when you run several slings across one truss span, they hang evenly and help keep your rig level.

Built for Truss Roofing, Hoists and Line Arrays SteelTex™ slings are a standard in the concert and theatrical world. They’re ideal for stage truss roofing systems, stage hoists and line array speakers, and for any job where sound and lighting gear needs to hang cleanly without drawing attention. Pair it with ProX truss and chain hoist setups for a clean, professional rig from top to bottom.

Correct Rigging Practices There are several correct ways to sling a truss, but a few rules always apply. Where possible, use the lower chords of the truss as the connecting point, sling in a compression configuration rather than a tension configuration, and rig at a node point. All truss rigging should be done by licensed persons. Never exceed the system’s W.L.L, including any dynamic loads that may be applied. And remember, a deformed truss is not a safe truss.

Things to Remember Safe rigging comes down to a few rules that never change. All truss rigging should be done by licensed persons who know how to read a load and set it up the right way. Never exceed the system’s W.L.L during operation, and that includes any dynamic loads that may be applied, like movement, wind or sudden stops. Where possible, sling at a node point, where the truss is built to carry the load. And always remember, a deformed truss is not a safe truss, so pull any bent or damaged section from service before it goes up.

Made in USA by SpanSet Every ProX SLINGR03 is made in the USA by SpanSet, one of the most trusted names in round slings. You get proven quality from a maker riggers already rely on, backed by ProX.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX SLINGR03 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Black Double Wall Polyester Cover Heavy jacket that blends into dark rigs
• Lightweight, Soft and Pliable Easy to wrap, handle overhead and pack
• Wide Inspection Window Hook and loop closure for quick core checks for broken wires or corrosion
• Dark Color Capacity Tag Low profile tag located beside the inspection window
• Galvanized Steel Aircraft Cable Core Wound in an endless configuration for lifting strength
• 3 ft Length Consistently matched lengths so multiple slings hang evenly
• Inconspicuous Suspension Ideal for sound and lighting gear, truss roofing, stage hoists and line arrays
• Industry Standard Trusted across the concert and theatrical industries
• Made in USA by SpanSet

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

All Truss Segments - Fits most brands

Compatibility

All Truss Segments - Fits most brands

Product details

Introducing the ProX XT-SLINGR03 3ft SpanSet SteelTex™ Round Sling. When you fly lights, speakers or truss over a crowd, the sling holding it all up has to be strong, easy to inspect and nearly invisible from the seats. The ProX SLINGR03 handles all three. It’s a 3 ft SpanSet SteelTex™ round sling built around a galvanized steel aircraft cable core and wrapped in a heavy black double wall polyester cover that disappears against a dark rig. This is the GAC (Galvanized Aircraft Cable) sling you’ll find at nearly every venue and event where rigging gets hung, and it’s Made in USA by SpanSet. If your crew is hanging truss, hoists or line arrays, this is the sling that belongs in the rigging bag.

Black Double Wall Polyester Cover The outside of the ProX SLINGR03 is a heavy black polyester jacket with a double wall build. The black finish helps the sling blend into the rig, so the audience sees the show and not the hardware holding it up. It also stays lightweight, soft and pliable, which makes it easy to wrap around a truss chord, handle overhead and pack away at the end of the night.

Wide Inspection Window Right beside the capacity tag sits a wide inspection window with a hook and loop closure. Open it up and you can look straight at the core to check for broken wires or corrosion. That matters because a sling should be checked before every use, and this window lets your crew do it fast without guessing what’s going on under the cover.

Dark Color Capacity Tag The capacity tag uses a dark color so it stays low profile on a black rig while still keeping the rating information with the sling. Always read the tag and confirm the Working Load Limit (W.L.L) before you rig.

Galvanized Aircraft Cable Core Inside, the load bearing member is galvanized steel aircraft cable wound in an endless configuration for lifting strength. The galvanized finish helps protect the steel, and the endless wind means there’s no single splice point carrying the load.

3 ft Length with Matched Consistency The ProX SLINGR03 is a 3 ft sling, and SpanSet keeps lengths consistently matched. So when you run several slings across one truss span, they hang evenly and help keep your rig level.

Built for Truss Roofing, Hoists and Line Arrays SteelTex™ slings are a standard in the concert and theatrical world. They’re ideal for stage truss roofing systems, stage hoists and line array speakers, and for any job where sound and lighting gear needs to hang cleanly without drawing attention. Pair it with ProX truss and chain hoist setups for a clean, professional rig from top to bottom.

Correct Rigging Practices There are several correct ways to sling a truss, but a few rules always apply. Where possible, use the lower chords of the truss as the connecting point, sling in a compression configuration rather than a tension configuration, and rig at a node point. All truss rigging should be done by licensed persons. Never exceed the system’s W.L.L, including any dynamic loads that may be applied. And remember, a deformed truss is not a safe truss.

Things to Remember Safe rigging comes down to a few rules that never change. All truss rigging should be done by licensed persons who know how to read a load and set it up the right way. Never exceed the system’s W.L.L during operation, and that includes any dynamic loads that may be applied, like movement, wind or sudden stops. Where possible, sling at a node point, where the truss is built to carry the load. And always remember, a deformed truss is not a safe truss, so pull any bent or damaged section from service before it goes up.

Made in USA by SpanSet Every ProX SLINGR03 is made in the USA by SpanSet, one of the most trusted names in round slings. You get proven quality from a maker riggers already rely on, backed by ProX.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX SLINGR03 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Black Double Wall Polyester Cover Heavy jacket that blends into dark rigs
• Lightweight, Soft and Pliable Easy to wrap, handle overhead and pack
• Wide Inspection Window Hook and loop closure for quick core checks for broken wires or corrosion
• Dark Color Capacity Tag Low profile tag located beside the inspection window
• Galvanized Steel Aircraft Cable Core Wound in an endless configuration for lifting strength
• 3 ft Length Consistently matched lengths so multiple slings hang evenly
• Inconspicuous Suspension Ideal for sound and lighting gear, truss roofing, stage hoists and line arrays
• Industry Standard Trusted across the concert and theatrical industries
• Made in USA by SpanSet

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.