Video Controller Flight Case for Blackmagic ATEM 1 M/E Camera Control Panel 3U + 6U by Santosom

Overview

Introducing the ProX XSM-AVMG3U6U Santosom Video Controller Flight Case, Blackmagic ATEM 1 M/E Camera Control Panel, a case built for the reality of live broadcast work, where a dropped case or a cracked panel can take a production off the air. Video control gear is expensive, delicate, and rarely has a backup sitting in the truck, so the case protecting it has to be built to a higher standard than a general-purpose road case. The ProX XSM-AVMG3U6U is that standard.

Birch-Ply Construction The shell is built from laminated birch plywood panels, a material chosen for its strength-to-weight ratio. It holds up to repeated loading, unloading, and stacking on tour without adding unnecessary bulk to the case itself, so crews are not fighting extra weight every time the case goes on or off the truck.

Aluminum Hybrid Lid The lid uses an aluminum hybrid construction with reinforced edges, backed by a 1.25" x 1.25" aluminum L angle profile running the perimeter. This is the seam most likely to take an impact during transport, so reinforcing it here means the case keeps its shape and its seal even after years on the road.

3U Front Rack and 6U Rear Rack Inside, the case is laid out with a 3U front rack and a 6U rear rack, both sized to standard 19" rack equipment. The front rack is built to mount control panels, video switchers, or processing gear where an operator needs direct access, while the rear rack handles cabling, power distribution, or secondary units, so signal and power stay organized instead of tangled together.

VESA-Compatible Monitor Mount The center compartment includes a VESA-compatible monitor mount rated for screens up to 20.1" x 13.4" x 2.8". Built-in monitor support means a broadcast or control monitor travels and deploys as part of the same rig instead of as a separate, unprotected item, which cuts down on setup time and one more thing that can go missing on load-in.

Butterfly Latches, Ball Corners, and Corner Braces The case is secured with 4 medium butterfly latches and protected by 8 ball corners and 8 corner braces. The latches keep the lid locked down tight during transport, while the ball corners and braces absorb impact at the points most likely to take a hit, keeping the force away from the gear inside.

Heavy-Duty Handles Two medium heavy-duty handles are mounted for lifting and loading. Positioned for balanced control, they make moving a fully loaded rack case a two-person job at most, not a struggle.

Rubber Feet Base Four durable rubber feet round out the base, giving the case grip on uneven surfaces and protecting it against sliding when stacked or set down mid-load.

Compatible with Blackmagic ATEM Camera Control Panel, SmartView Duo, SmartView 4K, and the ATEM 1 M/E Advanced Panel, the ProX XSM-AVMG3U6U is TAA Compliant and made in Portugal.

Made by Santosom in Portugal. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XSM-AVMG3U6U is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Birch-Ply Laminated Construction - lightweight yet durable shell built for repeated touring use
• Aluminum Hybrid Lid - reinforced with 1.25" x 1.25" aluminum L angle for added edge protection
• 3U Front Rack + 6U Rear Rack - dual 19" rack sections for control panels up front and cabling or power gear in back
• VESA-Compatible Monitor Mount - center compartment fits monitors up to 20.1" x 13.4" x 2.8"
• 4 Medium Butterfly Latches - secure closure for transport
• 8 Ball Corners + 8 Corner Braces - impact protection at the case's most vulnerable points
• 2 Medium Heavy-Duty Handles - balanced lifting for loading and unloading
• 4 Durable Rubber Feet - anti-slip base for grip and stack protection
• Compatible with Blackmagic ATEM Camera Control Panel, SmartView Duo, SmartView 4K, and ATEM 1 M/E Advanced Panel
• TAA Compliant - manufactured in Portugal
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Blackmagic ATEM Camera Control Panel
Blackmagic SmartView Duo
Blackmagic SmartView Duo 4K
Blackmagic SmartView 4K
ATEM 1 M/E Advanced Panel

Compatibility

Blackmagic ATEM Camera Control Panel
Blackmagic SmartView Duo
Blackmagic SmartView Duo 4K
Blackmagic SmartView 4K
ATEM 1 M/E Advanced Panel

Product details

Introducing the ProX XSM-AVMG3U6U Santosom Video Controller Flight Case, Blackmagic ATEM 1 M/E Camera Control Panel, a case built for the reality of live broadcast work, where a dropped case or a cracked panel can take a production off the air. Video control gear is expensive, delicate, and rarely has a backup sitting in the truck, so the case protecting it has to be built to a higher standard than a general-purpose road case. The ProX XSM-AVMG3U6U is that standard.

Birch-Ply Construction The shell is built from laminated birch plywood panels, a material chosen for its strength-to-weight ratio. It holds up to repeated loading, unloading, and stacking on tour without adding unnecessary bulk to the case itself, so crews are not fighting extra weight every time the case goes on or off the truck.

Aluminum Hybrid Lid The lid uses an aluminum hybrid construction with reinforced edges, backed by a 1.25" x 1.25" aluminum L angle profile running the perimeter. This is the seam most likely to take an impact during transport, so reinforcing it here means the case keeps its shape and its seal even after years on the road.

3U Front Rack and 6U Rear Rack Inside, the case is laid out with a 3U front rack and a 6U rear rack, both sized to standard 19" rack equipment. The front rack is built to mount control panels, video switchers, or processing gear where an operator needs direct access, while the rear rack handles cabling, power distribution, or secondary units, so signal and power stay organized instead of tangled together.

VESA-Compatible Monitor Mount The center compartment includes a VESA-compatible monitor mount rated for screens up to 20.1" x 13.4" x 2.8". Built-in monitor support means a broadcast or control monitor travels and deploys as part of the same rig instead of as a separate, unprotected item, which cuts down on setup time and one more thing that can go missing on load-in.

Butterfly Latches, Ball Corners, and Corner Braces The case is secured with 4 medium butterfly latches and protected by 8 ball corners and 8 corner braces. The latches keep the lid locked down tight during transport, while the ball corners and braces absorb impact at the points most likely to take a hit, keeping the force away from the gear inside.

Heavy-Duty Handles Two medium heavy-duty handles are mounted for lifting and loading. Positioned for balanced control, they make moving a fully loaded rack case a two-person job at most, not a struggle.

Rubber Feet Base Four durable rubber feet round out the base, giving the case grip on uneven surfaces and protecting it against sliding when stacked or set down mid-load.

Compatible with Blackmagic ATEM Camera Control Panel, SmartView Duo, SmartView 4K, and the ATEM 1 M/E Advanced Panel, the ProX XSM-AVMG3U6U is TAA Compliant and made in Portugal.

Made by Santosom in Portugal. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XSM-AVMG3U6U is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Birch-Ply Laminated Construction - lightweight yet durable shell built for repeated touring use
• Aluminum Hybrid Lid - reinforced with 1.25" x 1.25" aluminum L angle for added edge protection
• 3U Front Rack + 6U Rear Rack - dual 19" rack sections for control panels up front and cabling or power gear in back
• VESA-Compatible Monitor Mount - center compartment fits monitors up to 20.1" x 13.4" x 2.8"
• 4 Medium Butterfly Latches - secure closure for transport
• 8 Ball Corners + 8 Corner Braces - impact protection at the case's most vulnerable points
• 2 Medium Heavy-Duty Handles - balanced lifting for loading and unloading
• 4 Durable Rubber Feet - anti-slip base for grip and stack protection
• Compatible with Blackmagic ATEM Camera Control Panel, SmartView Duo, SmartView 4K, and ATEM 1 M/E Advanced Panel
• TAA Compliant - manufactured in Portugal
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.