LUMO Stage Acrylic Replacement Side Panels 42" Set of 2

Overview

Introducing the ProX XSA-42SX2 LUMOStage 42" Acrylic Replacement Side Panels Set of 2. When a side panel on your 42" LUMOStage cube gets cracked, scuffed or clouded, the whole riser stops looking right, and that's the first thing people notice when the lights come up. This matched pair is made for the ProX XSA-2X2-42 LUMOStage cube, so you can swap out the damaged sides and get the unit back to work without buying a whole new platform.

Made for the 42" LUMOStage Cube These panels are sized for the tall XSA-2X2-42 cube only. At 42" high, that cube works as a bar height display, a DJ booth riser, a dancer podium or a lit pedestal, and the side panels carry most of the look. They are not sized for the shorter LUMOStage cubes, so double check your cube height before you order.

Acrylic That Lets the Light Through The acrylic lets light from inside the cube glow through the sides. Whether you run a fixture, strip tape or the ProX X-LUMOTREE inside, the new panels bring back that even glow a scratched or clouded panel takes away.

Quick Release Hook and Loop, Already Applied The hook and loop fastening comes glued to the mounting side from the factory. Line the panel up on the frame, press it in place and you're done. Nothing to cut or stick on site, which matters when you're fixing a riser an hour before doors open.

Sold as a Pair You get two panels in the box. Replace two damaged sides at once, or keep one in the road case as a spare so a crack mid run doesn't pull the cube out of the show.

What's in the Box Two acrylic side panels only. This is not a stage platform and can't be used on its own. The cube frame, top panel, lighting and clamps are not included.

Complete the Look Building out a booth or a row of podiums? Add more ProX XSA-2X2-42 cubes to match, and drop a ProX X-LUMOTREE inside each one for a clean, even glow across the whole setup.

For over 40 years, ProX has built gear for the people who actually work the shows. The ProX XSA-42SX2 is part of that, made to keep your LUMOStage looking the way it did on day one.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

• Made for the ProX XSA-2X2-42: Sized for the 42" LUMOStage cube only
• Set of 2 Panels: Matched pair to replace two sides or keep one as a spare
• Acrylic Construction: Lets interior lighting glow through the sides of the cube
• Pre-Applied Quick Release Hook and Loop: Glued on at the factory for fast install
• Fast Repairs: Swap cracked or worn sides without replacing the whole cube
• Replacement Panels Only: Not a stage; frame, top panel, lighting and clamps not included
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XSA-42SX2 LUMOStage 42" Acrylic Replacement Side Panels Set of 2. When a side panel on your 42" LUMOStage cube gets cracked, scuffed or clouded, the whole riser stops looking right, and that's the first thing people notice when the lights come up. This matched pair is made for the ProX XSA-2X2-42 LUMOStage cube, so you can swap out the damaged sides and get the unit back to work without buying a whole new platform.

Made for the 42" LUMOStage Cube These panels are sized for the tall XSA-2X2-42 cube only. At 42" high, that cube works as a bar height display, a DJ booth riser, a dancer podium or a lit pedestal, and the side panels carry most of the look. They are not sized for the shorter LUMOStage cubes, so double check your cube height before you order.

Acrylic That Lets the Light Through The acrylic lets light from inside the cube glow through the sides. Whether you run a fixture, strip tape or the ProX X-LUMOTREE inside, the new panels bring back that even glow a scratched or clouded panel takes away.

Quick Release Hook and Loop, Already Applied The hook and loop fastening comes glued to the mounting side from the factory. Line the panel up on the frame, press it in place and you're done. Nothing to cut or stick on site, which matters when you're fixing a riser an hour before doors open.

Sold as a Pair You get two panels in the box. Replace two damaged sides at once, or keep one in the road case as a spare so a crack mid run doesn't pull the cube out of the show.

What's in the Box Two acrylic side panels only. This is not a stage platform and can't be used on its own. The cube frame, top panel, lighting and clamps are not included.

Complete the Look Building out a booth or a row of podiums? Add more ProX XSA-2X2-42 cubes to match, and drop a ProX X-LUMOTREE inside each one for a clean, even glow across the whole setup.

For over 40 years, ProX has built gear for the people who actually work the shows. The ProX XSA-42SX2 is part of that, made to keep your LUMOStage looking the way it did on day one.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

Key features

• Made for the ProX XSA-2X2-42: Sized for the 42" LUMOStage cube only
• Set of 2 Panels: Matched pair to replace two sides or keep one as a spare
• Acrylic Construction: Lets interior lighting glow through the sides of the cube
• Pre-Applied Quick Release Hook and Loop: Glued on at the factory for fast install
• Fast Repairs: Swap cracked or worn sides without replacing the whole cube
• Replacement Panels Only: Not a stage; frame, top panel, lighting and clamps not included
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.