Yamaha DM3 Mixer Case with Extending Handle and Low Profile Casters

Overview

Introducing the ProX XS-YDM3DHTW GIG Ready™ Case for Yamaha® DM3 Digital Mixer with Extending Handle and Low Profile Casters. The Yamaha® DM3 puts a serious digital console into a compact frame, and that makes it the mixer of choice for engineers who set up and tear down all the time. But a compact mixer still takes a beating in the back of a van, on a loading dock, or on the way into a church hall every Sunday. The ProX DM3 CASE was built for exactly that life. It wraps your DM3 in a padded interior made for this mixer, adds a cable management system at the rear, and rolls like a suitcase on a telescoping handle and low profile casters. So one person can get the mixer from the car to front of house in a single trip, and it shows up protected and ready to work.

Signature Honeycomb Digital™ Exterior The case is finished in ProX Signature Honeycomb Digital™ laminate, a black textured surface with a subtle hexagon pattern. It gives the case a clean, professional look that fits in just as well at a corporate event or wedding as it does on a club stage.

Aluminum Frame and Chrome Ball Corners Every edge is wrapped in aluminum extrusion, and chrome ball corners cap each corner of the case. The corners take the hits when the case gets bumped into a doorframe, set down hard, or packed into a truck, so the panels and your mixer don't have to.

Removable Lid with Recessed Butterfly Latches The lid lifts completely off for full, open access to the mixer. Four recessed butterfly latches, two on each side, lock it down tight. Since the latches sit recessed into the case, they stay out of the way and are less likely to snag on other gear during load in.

Write On ID Panel A write on label panel is set into the lid with fields for client, job number, box number, date and contents. For rental houses, production companies and touring crews, that means every case can be identified at a glance on a busy dock or in a crowded storage room.

Recessed Carry Handles Three recessed handles, one on each long side and one on the end, give you solid grip points for lifting the case into a vehicle or carrying it with a second person. Because they sit flush, the handles stay out of the way when cases are stacked or packed tight.

Telescoping Trolley Handle with Locking Mechanism A built in extending handle pulls out from the end of the case when it's time to roll. Once extended, the locking mechanism holds the handle securely in place, so it won't slide back in while you're pulling the case over curbs, ramps or rough pavement. When you're done, just press the red release button and the handle slides back into the case, out of the way for stacking and transport. No extra cart, no second trip back to the car.

Low Profile Casters and Rubber Feet Two low profile casters on the opposite end let you tip the case back and roll it through parking lots, hallways and venue back doors. Rubber feet on the bottom keep the case steady when it's sitting flat, so it stays put on stage or in a vehicle.

Padded Interior Built for the Yamaha® DM3 Inside, the base is lined with foam and fitted with raised padded support blocks that cradle the mixer and help keep it from shifting in transit. The DM3 sits supported and secure, which matters every time the case is tipped onto its wheels or rolled over rough ground.

Interior Dimensions The base measures 23" L x 15" W x 1" H, with 19.25" of usable length in front of the cable management uprights and 0.5" of foam lining. The raised padded support blocks measure 19" L x 5" W x 1" H each, and the lid adds 21.5" L x 15" W x 5" H of clearance above the mixer. Those numbers let you check the fit against your own setup before you order.

Integrated Cable Management System At the rear of the interior, two notched uprights give you a dedicated spot to organize the cables running off the back of the mixer. Instead of stuffing loose cables around the console, you can route and rest them in one place, which keeps things tidy and makes the next setup faster.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX DM3 CASE is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Made for the Yamaha® DM3 Padded interior built to cradle the DM3 digital mixer
• Signature Honeycomb Digital™ Exterior Black hexagon textured laminate finish
• Aluminum Edge Extrusion Frames and reinforces every edge of the case
• Chrome Ball Corners Protect all corners from bumps and impacts
• Removable Lid Lifts completely off for full access to the mixer
• Four Recessed Butterfly Latches Two per side, sit flush to avoid snagging
• Write On ID Panel Lid mounted with client, job no., box no., date and contents fields
• Three Recessed Carry Handles One on each long side and one on the end
• Telescoping Trolley Handle with locking mechanism, push button release, retracts when not in use
• Low Profile Casters Tip back and roll the case like a suitcase
• Rubber Feet Keep the case steady when sitting flat
• Foam Lined Interior Raised padded support blocks help keep the mixer from shifting
• Integrated Cable Management System Notched rear uprights for routing and organizing cables
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XS-YDM3DHTW GIG Ready™ Case for Yamaha® DM3 Digital Mixer with Extending Handle and Low Profile Casters. The Yamaha® DM3 puts a serious digital console into a compact frame, and that makes it the mixer of choice for engineers who set up and tear down all the time. But a compact mixer still takes a beating in the back of a van, on a loading dock, or on the way into a church hall every Sunday. The ProX DM3 CASE was built for exactly that life. It wraps your DM3 in a padded interior made for this mixer, adds a cable management system at the rear, and rolls like a suitcase on a telescoping handle and low profile casters. So one person can get the mixer from the car to front of house in a single trip, and it shows up protected and ready to work.

Signature Honeycomb Digital™ Exterior The case is finished in ProX Signature Honeycomb Digital™ laminate, a black textured surface with a subtle hexagon pattern. It gives the case a clean, professional look that fits in just as well at a corporate event or wedding as it does on a club stage.

Aluminum Frame and Chrome Ball Corners Every edge is wrapped in aluminum extrusion, and chrome ball corners cap each corner of the case. The corners take the hits when the case gets bumped into a doorframe, set down hard, or packed into a truck, so the panels and your mixer don't have to.

Removable Lid with Recessed Butterfly Latches The lid lifts completely off for full, open access to the mixer. Four recessed butterfly latches, two on each side, lock it down tight. Since the latches sit recessed into the case, they stay out of the way and are less likely to snag on other gear during load in.

Write On ID Panel A write on label panel is set into the lid with fields for client, job number, box number, date and contents. For rental houses, production companies and touring crews, that means every case can be identified at a glance on a busy dock or in a crowded storage room.

Recessed Carry Handles Three recessed handles, one on each long side and one on the end, give you solid grip points for lifting the case into a vehicle or carrying it with a second person. Because they sit flush, the handles stay out of the way when cases are stacked or packed tight.

Telescoping Trolley Handle with Locking Mechanism A built in extending handle pulls out from the end of the case when it's time to roll. Once extended, the locking mechanism holds the handle securely in place, so it won't slide back in while you're pulling the case over curbs, ramps or rough pavement. When you're done, just press the red release button and the handle slides back into the case, out of the way for stacking and transport. No extra cart, no second trip back to the car.

Low Profile Casters and Rubber Feet Two low profile casters on the opposite end let you tip the case back and roll it through parking lots, hallways and venue back doors. Rubber feet on the bottom keep the case steady when it's sitting flat, so it stays put on stage or in a vehicle.

Padded Interior Built for the Yamaha® DM3 Inside, the base is lined with foam and fitted with raised padded support blocks that cradle the mixer and help keep it from shifting in transit. The DM3 sits supported and secure, which matters every time the case is tipped onto its wheels or rolled over rough ground.

Interior Dimensions The base measures 23" L x 15" W x 1" H, with 19.25" of usable length in front of the cable management uprights and 0.5" of foam lining. The raised padded support blocks measure 19" L x 5" W x 1" H each, and the lid adds 21.5" L x 15" W x 5" H of clearance above the mixer. Those numbers let you check the fit against your own setup before you order.

Integrated Cable Management System At the rear of the interior, two notched uprights give you a dedicated spot to organize the cables running off the back of the mixer. Instead of stuffing loose cables around the console, you can route and rest them in one place, which keeps things tidy and makes the next setup faster.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX DM3 CASE is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Made for the Yamaha® DM3 Padded interior built to cradle the DM3 digital mixer
• Signature Honeycomb Digital™ Exterior Black hexagon textured laminate finish
• Aluminum Edge Extrusion Frames and reinforces every edge of the case
• Chrome Ball Corners Protect all corners from bumps and impacts
• Removable Lid Lifts completely off for full access to the mixer
• Four Recessed Butterfly Latches Two per side, sit flush to avoid snagging
• Write On ID Panel Lid mounted with client, job no., box no., date and contents fields
• Three Recessed Carry Handles One on each long side and one on the end
• Telescoping Trolley Handle with locking mechanism, push button release, retracts when not in use
• Low Profile Casters Tip back and roll the case like a suitcase
• Rubber Feet Keep the case steady when sitting flat
• Foam Lined Interior Raised padded support blocks help keep the mixer from shifting
• Integrated Cable Management System Notched rear uprights for routing and organizing cables
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.