8U Vertical Shockmount Rack Case 20" Depth with Dual Top Sliding Slam Doors

Overview

Featuring the ProX XS-SLAM8U20 8U Vertical Shockmount Rack Case with 20" Depth and Dual Top Sliding Slam Doors. A rack is only useful at a show if you can get to it. With most cases, that means pulling two lids and hunting for a spot to stash them backstage. This 8U rack case skips that step. The front and rear doors lift up and slide into the top of the case, so the doors travel with the rack and never leave it. With 8U of space and 20" between the front and rear rails, there is room for a full wireless system, a processing stack, or a network and power setup, all riding on an internal shockmount that protects the gear between venues.

ATA-300 Style Construction The shell is built in the ATA-300 style from AAA grade 3/8" (10mm) birch plywood with a minimal void laminated structure. Fewer voids in the plywood means stronger walls that hold up to stacking, strapping, and the bumps that come with every load in and load out. A precision aluminum tongue and groove locking profile frames the case, and reinforced dual anchor rivets keep the hardware fastened over years of use.

Signature Honeycomb Digital™ Laminate The outside of the case wears the Signature Honeycomb Digital™ laminated surface. It gives the rack a clean, professional look, whether it sits side stage, at front of house, or in a control room in view of a client. An integrated label dish on top lets you mark what the rack is, so your crew can pick it out of a row of similar cases without opening anything.

Exterior Size and Weight The case measures 18.50" H x 22.25" W x 26.25" L and weighs 48 lbs empty. It is tall enough to hold a serious amount of gear, yet still a manageable size for a van, a trailer, or a storage shelf. The stackable design lets it sit as part of a rack system, which saves floor space in the truck and at the venue.

8U of 19" Rack Space with 20" Rail Depth The interior rack opening measures 14" H x 19" W, giving you 8U of standard 19" rack space. Rack height is measured in rack units, and 1U equals 1.75". The rack has 20" of mounting depth between the front and rear rack rails, so equipment can be secured at the front and supported at the rear. Measure your deepest unit with its rear connectors plugged in before you buy, so you know it fits inside that 20" depth.

Internal Shockmount Rack System The rack rails are mounted within a high performance internal shockmount system. The shockmount isolates the rack frame from the outer shell, so vibration and impact from transport and handling are absorbed before they reach your gear. For a rack loaded with wireless receivers, audio interfaces, signal processors, or lighting control processors, that isolation helps protect the money you have invested in what is inside.

Dual Top Sliding Slam Doors Both the front and rear doors lift upward and retract into the top section of the case. The doors stay contained in the case while open, so there are no loose lids on the floor and nothing to track down at the end of the night. You get open access to the front panels and the rear connections, which makes patching, cabling, and troubleshooting easier in tight spaces like stages, control rooms, and mobile setups.

Recessed Press to Unlock Latches Each door is held by a recessed press to unlock latch. Press upward to release it, lift the door, and slide it into the top storage channel. The latches are recessed into the doors, which keeps them out of the way when the case is packed against other gear.

Recessed Spring Loaded Handles Industrial grade recessed spring loaded rubber handles give you a firm hold for lifting and carrying. They fold back flush when released, so the sides of the case stay clean for tight packing.

Rubber Feet Industrial rubber feet on the base keep the ProX XS-SLAM8U20 steady wherever you set it down, whether that is a stage deck, a table, or the top of another case.

ProX Limited Lifetime Warranty The ProX XS-SLAM8U20 is backed by the ProX Limited Lifetime Warranty. See the ProX warranty terms page for full coverage details.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-SLAM8U20 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Dual top sliding slam doors front and rear doors lift up and retract into the top of the case
• No removable lids doors stay contained in the case while open
• Recessed press to unlock latches press upward to release each door
• 8U vertical rack fits standard 19" rack mount equipment
• 20" rail to rail depth measured between the front and rear rack rails
• Internal shockmount system rack rails mounted within a shock absorbing frame that protects sensitive electronics
• ATA-300 style construction built for professional transport
• AAA grade 3/8" (10mm) birch plywood minimal void laminated structure for strength
• Signature Honeycomb Digital™ laminated exterior surface
• Aluminum tongue and groove precision locking profile
• Reinforced dual anchor rivets for long term durability
• Recessed spring loaded rubber handles industrial grade
• Integrated top label dish for case identification
• Stackable design for building rack systems
• Industrial rubber feet for stability
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Featuring the ProX XS-SLAM8U20 8U Vertical Shockmount Rack Case with 20" Depth and Dual Top Sliding Slam Doors. A rack is only useful at a show if you can get to it. With most cases, that means pulling two lids and hunting for a spot to stash them backstage. This 8U rack case skips that step. The front and rear doors lift up and slide into the top of the case, so the doors travel with the rack and never leave it. With 8U of space and 20" between the front and rear rails, there is room for a full wireless system, a processing stack, or a network and power setup, all riding on an internal shockmount that protects the gear between venues.

ATA-300 Style Construction The shell is built in the ATA-300 style from AAA grade 3/8" (10mm) birch plywood with a minimal void laminated structure. Fewer voids in the plywood means stronger walls that hold up to stacking, strapping, and the bumps that come with every load in and load out. A precision aluminum tongue and groove locking profile frames the case, and reinforced dual anchor rivets keep the hardware fastened over years of use.

Signature Honeycomb Digital™ Laminate The outside of the case wears the Signature Honeycomb Digital™ laminated surface. It gives the rack a clean, professional look, whether it sits side stage, at front of house, or in a control room in view of a client. An integrated label dish on top lets you mark what the rack is, so your crew can pick it out of a row of similar cases without opening anything.

Exterior Size and Weight The case measures 18.50" H x 22.25" W x 26.25" L and weighs 48 lbs empty. It is tall enough to hold a serious amount of gear, yet still a manageable size for a van, a trailer, or a storage shelf. The stackable design lets it sit as part of a rack system, which saves floor space in the truck and at the venue.

8U of 19" Rack Space with 20" Rail Depth The interior rack opening measures 14" H x 19" W, giving you 8U of standard 19" rack space. Rack height is measured in rack units, and 1U equals 1.75". The rack has 20" of mounting depth between the front and rear rack rails, so equipment can be secured at the front and supported at the rear. Measure your deepest unit with its rear connectors plugged in before you buy, so you know it fits inside that 20" depth.

Internal Shockmount Rack System The rack rails are mounted within a high performance internal shockmount system. The shockmount isolates the rack frame from the outer shell, so vibration and impact from transport and handling are absorbed before they reach your gear. For a rack loaded with wireless receivers, audio interfaces, signal processors, or lighting control processors, that isolation helps protect the money you have invested in what is inside.

Dual Top Sliding Slam Doors Both the front and rear doors lift upward and retract into the top section of the case. The doors stay contained in the case while open, so there are no loose lids on the floor and nothing to track down at the end of the night. You get open access to the front panels and the rear connections, which makes patching, cabling, and troubleshooting easier in tight spaces like stages, control rooms, and mobile setups.

Recessed Press to Unlock Latches Each door is held by a recessed press to unlock latch. Press upward to release it, lift the door, and slide it into the top storage channel. The latches are recessed into the doors, which keeps them out of the way when the case is packed against other gear.

Recessed Spring Loaded Handles Industrial grade recessed spring loaded rubber handles give you a firm hold for lifting and carrying. They fold back flush when released, so the sides of the case stay clean for tight packing.

Rubber Feet Industrial rubber feet on the base keep the ProX XS-SLAM8U20 steady wherever you set it down, whether that is a stage deck, a table, or the top of another case.

ProX Limited Lifetime Warranty The ProX XS-SLAM8U20 is backed by the ProX Limited Lifetime Warranty. See the ProX warranty terms page for full coverage details.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-SLAM8U20 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Dual top sliding slam doors front and rear doors lift up and retract into the top of the case
• No removable lids doors stay contained in the case while open
• Recessed press to unlock latches press upward to release each door
• 8U vertical rack fits standard 19" rack mount equipment
• 20" rail to rail depth measured between the front and rear rack rails
• Internal shockmount system rack rails mounted within a shock absorbing frame that protects sensitive electronics
• ATA-300 style construction built for professional transport
• AAA grade 3/8" (10mm) birch plywood minimal void laminated structure for strength
• Signature Honeycomb Digital™ laminated exterior surface
• Aluminum tongue and groove precision locking profile
• Reinforced dual anchor rivets for long term durability
• Recessed spring loaded rubber handles industrial grade
• Integrated top label dish for case identification
• Stackable design for building rack systems
• Industrial rubber feet for stability
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.