2U Vertical Shockmount Rack Case 14" Depth with Dual Top Sliding Slam Doors

Overview

Introducing the ProX XS-SLAM2U14 2U Vertical Shockmount Rack Case 14" Depth with Dual Top Sliding Slam Doors. If you have ever set down a rack lid backstage and spent load out looking for it, this case fixes that problem for good. The front and rear doors slide up and store inside the top of the case, so there are no loose lids to carry, stack, or lose. Your wireless receivers, processors, and power conditioners ride on a shockmount rack frame, protected in transit and open for use in seconds. It is a compact 2U rack built for mobile DJs, live sound engineers, AV installers, broadcast techs, and touring crews who need quick access to 19" rack gear without giving up protection.

ATA-300 Style Construction The ProX XS-SLAM2U14 is built in ATA-300 style gig and road case construction using AAA grade 3/8" birch plywood. The laminated plywood is a minimal void structure, which gives the panels real strength where cheaper cases flex and crack. That matters on a small rack like this one, because it gets carried by hand, stacked in vans, and loaded under heavier gear week after week.

Signature Honeycomb Digital™ Laminate The exterior is finished in the Signature Honeycomb Digital™ laminated surface. It gives the case a clean, professional look that holds up when the rack sits in plain view next to a DJ booth, a front of house position, or a corporate AV table.

Aluminum Tongue and Groove Profile A precision aluminum tongue and groove locking profile frames the shell and gives the doors a firm, accurate seat when closed. Reinforced dual anchor rivets hold the hardware in place for the long run, so the case stays tight after years of loading and unloading.

2U Rack Space with 14" Rail Depth Inside, you get 2U of standard 19" rack space, which equals 3.5" of rack height. The rack measures 14" between the front and rear rack rails, a good fit for compact rack gear such as wireless microphone receivers, in ear monitor systems, signal processors, power conditioners, audio interfaces, network switches, and lighting control processors. With rails at both the front and the rear, deeper units can be supported at both ends instead of hanging off the front ears alone.

Shockmount Rack Frame The rack rails are mounted within an internal shock absorbing shockmount system that isolates your equipment from the outer shell. Bumps, drops, and road vibration hit the case first, not your gear. For sensitive electronics that travel to every show, this is the difference between a rack that works at soundcheck and one that needs a repair.

Dual Top Sliding Slam Doors This is what sets the ProX XS-SLAM2U14 apart. Both the front and rear doors lift upward and retract into the top section of the case, where they stay safely contained while you work. There is nothing to remove, nothing to lean against a wall, and nothing left behind at the venue. You get clear access to the front panel controls and the rear connections at the same time, which makes patching and troubleshooting much easier in tight spaces such as stages, control rooms, and mobile setups.

Recessed Press to Unlock Latches Each door uses a recessed press to unlock latch. Press upward to release it, lift the door, and slide it into the top storage channel. Because the latches sit recessed in the door, they stay out of the way and are less likely to catch on other gear during transport.

Recessed Spring Loaded Handles Industrial grade recessed spring loaded rubber handles give you a comfortable, secure grip for carrying. They fold back into the case when you let go, keeping the sides flush so the rack packs tight against other cases in a vehicle.

Stackable Design with Top Label Dish The case is stackable, so you can build it into a larger rack system or save floor space in storage and transport. An integrated label dish on top makes it easy to identify what is inside at a glance, which helps when you own several racks that look the same from the outside.

Rubber Feet Industrial rubber stopping feet sit at the base of the case. They keep the rack planted on tables, stages, and other cases, and they help protect the surface underneath.

ProX Limited Lifetime Warranty The ProX XS-SLAM2U14 is backed by the ProX Limited Lifetime Warranty.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-SLAM2U14 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Dual Top Sliding Slam Doors front and rear doors lift up and retract into the top of the case
• No Loose Lids doors stay stored inside the case while open
• Recessed Press to Unlock Latches press upward to release and lift each door
• ATA-300 Style Construction gig and road case build
• AAA Grade 3/8" Birch Plywood minimal void laminated structure for strength
• Signature Honeycomb Digital™ Laminate exterior surface finish
• Aluminum Tongue and Groove Profile precision locking frame
• Reinforced Dual Anchor Rivets for long term durability
• 2U Vertical Rack Space fits standard 19" rack mount equipment
• 14" Rail Depth measured between the front and rear rack rails
• Shockmount Rack Frame rack rails mounted within a shock absorbing isolation system
• Recessed Spring Loaded Handles industrial grade with rubber grips
• Stackable Design works with other racks in a system
• Top Label Dish integrated for quick identification
• Industrial Rubber Feet for stability
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XS-SLAM2U14 2U Vertical Shockmount Rack Case 14" Depth with Dual Top Sliding Slam Doors. If you have ever set down a rack lid backstage and spent load out looking for it, this case fixes that problem for good. The front and rear doors slide up and store inside the top of the case, so there are no loose lids to carry, stack, or lose. Your wireless receivers, processors, and power conditioners ride on a shockmount rack frame, protected in transit and open for use in seconds. It is a compact 2U rack built for mobile DJs, live sound engineers, AV installers, broadcast techs, and touring crews who need quick access to 19" rack gear without giving up protection.

ATA-300 Style Construction The ProX XS-SLAM2U14 is built in ATA-300 style gig and road case construction using AAA grade 3/8" birch plywood. The laminated plywood is a minimal void structure, which gives the panels real strength where cheaper cases flex and crack. That matters on a small rack like this one, because it gets carried by hand, stacked in vans, and loaded under heavier gear week after week.

Signature Honeycomb Digital™ Laminate The exterior is finished in the Signature Honeycomb Digital™ laminated surface. It gives the case a clean, professional look that holds up when the rack sits in plain view next to a DJ booth, a front of house position, or a corporate AV table.

Aluminum Tongue and Groove Profile A precision aluminum tongue and groove locking profile frames the shell and gives the doors a firm, accurate seat when closed. Reinforced dual anchor rivets hold the hardware in place for the long run, so the case stays tight after years of loading and unloading.

2U Rack Space with 14" Rail Depth Inside, you get 2U of standard 19" rack space, which equals 3.5" of rack height. The rack measures 14" between the front and rear rack rails, a good fit for compact rack gear such as wireless microphone receivers, in ear monitor systems, signal processors, power conditioners, audio interfaces, network switches, and lighting control processors. With rails at both the front and the rear, deeper units can be supported at both ends instead of hanging off the front ears alone.

Shockmount Rack Frame The rack rails are mounted within an internal shock absorbing shockmount system that isolates your equipment from the outer shell. Bumps, drops, and road vibration hit the case first, not your gear. For sensitive electronics that travel to every show, this is the difference between a rack that works at soundcheck and one that needs a repair.

Dual Top Sliding Slam Doors This is what sets the ProX XS-SLAM2U14 apart. Both the front and rear doors lift upward and retract into the top section of the case, where they stay safely contained while you work. There is nothing to remove, nothing to lean against a wall, and nothing left behind at the venue. You get clear access to the front panel controls and the rear connections at the same time, which makes patching and troubleshooting much easier in tight spaces such as stages, control rooms, and mobile setups.

Recessed Press to Unlock Latches Each door uses a recessed press to unlock latch. Press upward to release it, lift the door, and slide it into the top storage channel. Because the latches sit recessed in the door, they stay out of the way and are less likely to catch on other gear during transport.

Recessed Spring Loaded Handles Industrial grade recessed spring loaded rubber handles give you a comfortable, secure grip for carrying. They fold back into the case when you let go, keeping the sides flush so the rack packs tight against other cases in a vehicle.

Stackable Design with Top Label Dish The case is stackable, so you can build it into a larger rack system or save floor space in storage and transport. An integrated label dish on top makes it easy to identify what is inside at a glance, which helps when you own several racks that look the same from the outside.

Rubber Feet Industrial rubber stopping feet sit at the base of the case. They keep the rack planted on tables, stages, and other cases, and they help protect the surface underneath.

ProX Limited Lifetime Warranty The ProX XS-SLAM2U14 is backed by the ProX Limited Lifetime Warranty.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-SLAM2U14 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Dual Top Sliding Slam Doors front and rear doors lift up and retract into the top of the case
• No Loose Lids doors stay stored inside the case while open
• Recessed Press to Unlock Latches press upward to release and lift each door
• ATA-300 Style Construction gig and road case build
• AAA Grade 3/8" Birch Plywood minimal void laminated structure for strength
• Signature Honeycomb Digital™ Laminate exterior surface finish
• Aluminum Tongue and Groove Profile precision locking frame
• Reinforced Dual Anchor Rivets for long term durability
• 2U Vertical Rack Space fits standard 19" rack mount equipment
• 14" Rail Depth measured between the front and rear rack rails
• Shockmount Rack Frame rack rails mounted within a shock absorbing isolation system
• Recessed Spring Loaded Handles industrial grade with rubber grips
• Stackable Design works with other racks in a system
• Top Label Dish integrated for quick identification
• Industrial Rubber Feet for stability
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.