1 ft Low Profile XLR Female to Male Patch Cable 10 Pack with Color Coded Caps

Overview

ProX introduces the ProX XC-XLRLP01X10 1 ft Low Profile XLR Audio Performance Cable 10 Pack. When your gear is stacked unit on unit, even a short cable can be too much. The extra length droops between rack spaces, crowds the back of a mixer case, and turns a clean patch bay into a mess you have to dig through every time something changes. This 10 pack is made for those close quarters. You get ten 1 ft cables, each with a low profile female XLR on one end and a low profile male XLR on the other, so you can jump from one unit to the very next with the cable tight to the gear and nothing hanging in the way.

Ten 1 ft Cables in One Pack Each package holds ten complete cables, for 10 female XLR ends and 10 male XLR ends in total. That’s enough to link a full stack of processors, wireless receivers, or interfaces in one rack, or to patch a mixer into a stage box sitting right beside it in the same case. One foot is the shortest practical run for gear that sits side by side or stacked directly above and below.

Low Profile XLR Connectors The cable leaves the connector from the side instead of straight out the back, so each plug sits close to the panel. In shallow racks and tight combo cases, that means the rear door closes without pressing on your cables. It also keeps plugs from sticking out where hands, cases, and other cables can knock them, which puts less strain on your inputs and outputs over time.

Color Coded End Caps Every connector wears a colored end cap, with a mix of colors across the pack. In a tight rack where every short cable looks the same, color is the fastest way to tell which line goes where. Give each unit or channel its own color and resets, troubleshooting, and teardown get a lot quicker for you and your crew.

Locking Female Connectors The female ends use a latching design with a release tab, so they lock onto male jacks and stay put through truck rides, rolling racks, and loud nights on stage. Press the tab to release when you need to repatch.

Gold Finish Contacts The male connectors have gold finish pins, giving each cable a clean, professional connection point on your mixers, processors, and interfaces.

Where It Fits Best The ProX XLRLP01X10 is a natural fit for rack builders, broadcast and AV techs, FOH and monitor engineers, mobile DJs, and studio owners who want short, neat runs between gear that lives together. It pairs well with ProX rack cases, ProX stage boxes, and the ProX XC-XLRLP02X10 2 ft pack when a few runs need a little more reach. For fully custom lengths, the ProX XC-XLR24LP50FT DIY bundle lets you build low profile XLR cables to the exact size you need.

Bundled and Ready to Go The pack arrives bundled with a ProX hook and loop strap, so the set stays together in your gig bag or case until install day.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XLRLP01X10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• 10 Pack of 1 ft XLR Cables Ten complete cables in one package
• Female XLR to Male XLR 10 female ends and 10 male ends per pack
• Low Profile Connectors Side exit design keeps plugs tight to the panel
• Made for Stacked and Side by Side Gear 1 ft runs with no extra slack
• Less Strain on Jacks Less connector sticking out to get bumped
• Color Coded End Caps Multiple cap colors for quick channel and device identification
• Locking Female Connectors Latch with release tab holds cables in place
• Gold Finish Contacts Clean connection point on the male pins
• ProX Hook and Loop Strap Keeps the pack bundled for storage and transport
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

ProX introduces the ProX XC-XLRLP01X10 1 ft Low Profile XLR Audio Performance Cable 10 Pack. When your gear is stacked unit on unit, even a short cable can be too much. The extra length droops between rack spaces, crowds the back of a mixer case, and turns a clean patch bay into a mess you have to dig through every time something changes. This 10 pack is made for those close quarters. You get ten 1 ft cables, each with a low profile female XLR on one end and a low profile male XLR on the other, so you can jump from one unit to the very next with the cable tight to the gear and nothing hanging in the way.

Ten 1 ft Cables in One Pack Each package holds ten complete cables, for 10 female XLR ends and 10 male XLR ends in total. That’s enough to link a full stack of processors, wireless receivers, or interfaces in one rack, or to patch a mixer into a stage box sitting right beside it in the same case. One foot is the shortest practical run for gear that sits side by side or stacked directly above and below.

Low Profile XLR Connectors The cable leaves the connector from the side instead of straight out the back, so each plug sits close to the panel. In shallow racks and tight combo cases, that means the rear door closes without pressing on your cables. It also keeps plugs from sticking out where hands, cases, and other cables can knock them, which puts less strain on your inputs and outputs over time.

Color Coded End Caps Every connector wears a colored end cap, with a mix of colors across the pack. In a tight rack where every short cable looks the same, color is the fastest way to tell which line goes where. Give each unit or channel its own color and resets, troubleshooting, and teardown get a lot quicker for you and your crew.

Locking Female Connectors The female ends use a latching design with a release tab, so they lock onto male jacks and stay put through truck rides, rolling racks, and loud nights on stage. Press the tab to release when you need to repatch.

Gold Finish Contacts The male connectors have gold finish pins, giving each cable a clean, professional connection point on your mixers, processors, and interfaces.

Where It Fits Best The ProX XLRLP01X10 is a natural fit for rack builders, broadcast and AV techs, FOH and monitor engineers, mobile DJs, and studio owners who want short, neat runs between gear that lives together. It pairs well with ProX rack cases, ProX stage boxes, and the ProX XC-XLRLP02X10 2 ft pack when a few runs need a little more reach. For fully custom lengths, the ProX XC-XLR24LP50FT DIY bundle lets you build low profile XLR cables to the exact size you need.

Bundled and Ready to Go The pack arrives bundled with a ProX hook and loop strap, so the set stays together in your gig bag or case until install day.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XLRLP01X10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• 10 Pack of 1 ft XLR Cables Ten complete cables in one package
• Female XLR to Male XLR 10 female ends and 10 male ends per pack
• Low Profile Connectors Side exit design keeps plugs tight to the panel
• Made for Stacked and Side by Side Gear 1 ft runs with no extra slack
• Less Strain on Jacks Less connector sticking out to get bumped
• Color Coded End Caps Multiple cap colors for quick channel and device identification
• Locking Female Connectors Latch with release tab holds cables in place
• Gold Finish Contacts Clean connection point on the male pins
• ProX Hook and Loop Strap Keeps the pack bundled for storage and transport
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.