10 ft Male to Female 12AWG Power Cable for PowerKon compatible devices

Overview

Introducing the ProX XC-TR1FM12-10 10 Ft. Male to Female 12AWG Locking Power Link Cable, a 20A power patch built for the runs that actually cover ground. Ten feet is where the short jumpers run out. It reaches from a distro across a stage left riser, links speaker positions spread apart on a wide stage, and feeds a fixture at the far end of a truss span without you splicing two cables together to get there. It locks in, it carries real current, and it holds the connection when the show gets moving.

TR1 Style Locking Connectors On Both Ends The XC-TR1FM12-10 carries a male connector on one end and a female connector on the other, so it links directly into gear built with TR1 type locking power inlets and outlets. These are YongSheng connectors, compatible with TR1 style power connection devices already running in your rig. The male end takes the feed, the female end passes it on, and the chain keeps going from there.

Twist And Lock In One Motion Push in, twist, done. No screws, no tools, no fumbling behind a rack in the dark. The locking system holds through stage vibration, foot traffic, and cable tension. On a 10 ft. run there is more cable to catch a foot or a case wheel, which is exactly why the lock matters more at this length.

Rated for 20A Single Phase The XC-TR1FM12-10 handles a lockable single phase 20A capacity. That covers powered speakers, moving heads, amplifiers, media servers, and the rest of the active gear working a show.

Connector With Breaking Capacity This is a CBC rated connection, meaning it can be connected or disconnected under load or live. Out on a working stage you do not always get to kill power first, and this cable is built for that reality.

Ground Mates First for a Safer Connection The twist action makes up the ground contact before the neutral and line contacts connect. You get an electrically safe connection every time, and a meaningfully safer link than the IEC 60320 C13/C14 couplers found on consumer components, computers, and power adapters.

IP65 Rated Against Dust and Water The connectors carry an IP65 dust and water protection rating. Outdoor stages, tented events, damp load ins, and dusty festival grounds are all part of the job, and this cable keeps working through them.

12AWG Pure Copper Conductors Inside the jacket are 12AWG pure copper conductors. On a 10 ft. run, gauge starts to matter more, and the heavier copper keeps voltage drop and heat buildup down under sustained load. That protects both the cable and the gear pulling through it. Pure copper also survives repeated coiling and uncoiling better than cheaper conductor blends.

UL and cUL Tested Components The XC-TR1FM12-10 is built with UL and cUL tested components, so it holds up to the scrutiny of venues, rental houses, and production managers who check before they plug in.

A 10 Ft. Length That Solves Real Problems Ten feet is the working distance for stage left to stage right patching on a compact setup, feeding a lighting position partway down a truss, reaching an amp rack set back from the deck, and connecting gear separated by a walkway or a riser. It is the length most rigs run out of first, so it is worth keeping spares in the cable trunk.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-TR1FM12-10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Male to Female TR1 Style Locking Connectors Links directly into gear equipped with TR1 type locking power inlets and outlets
• Twist Lock Latching System Fast push and twist connection that stays locked under vibration and cable tension
• Lockable 20A Single Phase Capacity Enough headroom for powered speakers, moving heads, amps, and media servers
• Connector With Breaking Capacity (CBC) Can be connected or disconnected under load or live
• Ground Contact Mates First Twist action grounds before neutral and line make up for a safer connection
• IP65 Dust and Water Protection Rating Holds up to outdoor stages, damp load ins, and dusty festival grounds
• 12AWG Pure Copper Conductors Lower voltage drop and less heat buildup across the full 10 ft. run
• UL and cUL Tested Components Meets the expectations of venues, rental houses, and production managers
• Safer Than IEC 60320 C13/C14 Couplers Locking 3 conductor design replaces friction fit consumer style couplers
• 10 Ft. Working Length Sized for stage width patching, truss span reaches, and gear separated by risers or walkways
• Extremely Robust and Reliable Build Rugged construction for repeated coiling, transport, and daily show use
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Universal for all PowerKon compatible devices

Compatibility

Universal for all PowerKon compatible devices

Product details

Introducing the ProX XC-TR1FM12-10 10 Ft. Male to Female 12AWG Locking Power Link Cable, a 20A power patch built for the runs that actually cover ground. Ten feet is where the short jumpers run out. It reaches from a distro across a stage left riser, links speaker positions spread apart on a wide stage, and feeds a fixture at the far end of a truss span without you splicing two cables together to get there. It locks in, it carries real current, and it holds the connection when the show gets moving.

TR1 Style Locking Connectors On Both Ends The XC-TR1FM12-10 carries a male connector on one end and a female connector on the other, so it links directly into gear built with TR1 type locking power inlets and outlets. These are YongSheng connectors, compatible with TR1 style power connection devices already running in your rig. The male end takes the feed, the female end passes it on, and the chain keeps going from there.

Twist And Lock In One Motion Push in, twist, done. No screws, no tools, no fumbling behind a rack in the dark. The locking system holds through stage vibration, foot traffic, and cable tension. On a 10 ft. run there is more cable to catch a foot or a case wheel, which is exactly why the lock matters more at this length.

Rated for 20A Single Phase The XC-TR1FM12-10 handles a lockable single phase 20A capacity. That covers powered speakers, moving heads, amplifiers, media servers, and the rest of the active gear working a show.

Connector With Breaking Capacity This is a CBC rated connection, meaning it can be connected or disconnected under load or live. Out on a working stage you do not always get to kill power first, and this cable is built for that reality.

Ground Mates First for a Safer Connection The twist action makes up the ground contact before the neutral and line contacts connect. You get an electrically safe connection every time, and a meaningfully safer link than the IEC 60320 C13/C14 couplers found on consumer components, computers, and power adapters.

IP65 Rated Against Dust and Water The connectors carry an IP65 dust and water protection rating. Outdoor stages, tented events, damp load ins, and dusty festival grounds are all part of the job, and this cable keeps working through them.

12AWG Pure Copper Conductors Inside the jacket are 12AWG pure copper conductors. On a 10 ft. run, gauge starts to matter more, and the heavier copper keeps voltage drop and heat buildup down under sustained load. That protects both the cable and the gear pulling through it. Pure copper also survives repeated coiling and uncoiling better than cheaper conductor blends.

UL and cUL Tested Components The XC-TR1FM12-10 is built with UL and cUL tested components, so it holds up to the scrutiny of venues, rental houses, and production managers who check before they plug in.

A 10 Ft. Length That Solves Real Problems Ten feet is the working distance for stage left to stage right patching on a compact setup, feeding a lighting position partway down a truss, reaching an amp rack set back from the deck, and connecting gear separated by a walkway or a riser. It is the length most rigs run out of first, so it is worth keeping spares in the cable trunk.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-TR1FM12-10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Male to Female TR1 Style Locking Connectors Links directly into gear equipped with TR1 type locking power inlets and outlets
• Twist Lock Latching System Fast push and twist connection that stays locked under vibration and cable tension
• Lockable 20A Single Phase Capacity Enough headroom for powered speakers, moving heads, amps, and media servers
• Connector With Breaking Capacity (CBC) Can be connected or disconnected under load or live
• Ground Contact Mates First Twist action grounds before neutral and line make up for a safer connection
• IP65 Dust and Water Protection Rating Holds up to outdoor stages, damp load ins, and dusty festival grounds
• 12AWG Pure Copper Conductors Lower voltage drop and less heat buildup across the full 10 ft. run
• UL and cUL Tested Components Meets the expectations of venues, rental houses, and production managers
• Safer Than IEC 60320 C13/C14 Couplers Locking 3 conductor design replaces friction fit consumer style couplers
• 10 Ft. Working Length Sized for stage width patching, truss span reaches, and gear separated by risers or walkways
• Extremely Robust and Reliable Build Rugged construction for repeated coiling, transport, and daily show use
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.