10PCS 3 Ft Male to Female 12AWG Power Cable for Power Connection compatible devices

Overview

Introducing the ProX XC-TR1FM12-03 3 Ft. Male to Female 12AWG Locking Power Link Cable, a 20A power patch built for the short runs that hold your rig together. This is the cable you reach for when two powered boxes sit side by side in a rack, when you need to link a pair of active speakers on the same pole, or when a lighting fixture has to pull power from the unit next to it. It locks in, it stays in, and it does not walk out of the socket when someone drags a case across the stage.

TR1 Style Locking Connectors On Both Ends The XC-TR1FM12-03 uses a male connector on one end and a female connector on the other, so it links directly into gear equipped with TR1 type locking power inlets and outlets. These connectors are built by YongSheng and are compatible with TR1 style power connection devices already in your setup. The male end plugs into the source, the female end feeds the next unit, and the run continues from there.

Twist And Lock In One Motion The latching system is fast. Push in, twist, done. No screws, no tools, no fumbling in the dark behind a rack. The lock holds the connection under stage vibration, foot traffic, and cable tension, which is exactly where standard friction fit couplers give up.

Rated for 20A Single Phase The XC-TR1FM12-03 carries a lockable single phase 20A capacity. That headroom covers powered speakers, moving heads, media servers, amplifiers, and most of the active gear in a working production rig.

Connector With Breaking Capacity This is a CBC rated connection, meaning it can be connected or disconnected under load or live. That matters on a busy stage where you do not always have the luxury of killing power first. It is a working feature, not a spec sheet line.

Ground Mates First for a Safer Connection The twist action mates the ground contact before the neutral and line contacts make up. You get an electrically safe connection every time, and a meaningfully safer setup than the IEC 60320 C13/C14 couplers found on consumer components, computers, and power supplies.

IP65 Rated Against Dust and Water The connectors carry an IP65 dust and water protection rating. Outdoor stages, tented events, damp load ins, and dusty festival grounds are all part of the job, and this cable is built to keep working through them.

12AWG Pure Copper Conductors Inside the jacket you get 12AWG pure copper conductors. Heavier gauge means lower voltage drop and less heat under sustained load, which protects both the cable and the gear pulling through it. Pure copper also holds up better to repeated coiling and uncoiling than cheaper conductor blends.

UL and cUL Tested Components The XC-TR1FM12-03 is built with UL and cUL tested components, so it meets the expectations of venues, rental houses, and production managers who check before they plug in.

A 3 Ft. Length That Solves Real Problems Three feet is short on purpose. It is the right call for rack to rack patching, linking stacked or paired powered speakers, jumping between adjacent lighting fixtures on the same truss, and any spot where a longer cable would just become slack to coil and hide. Less excess cable means cleaner sightlines and faster teardown.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-TR1FM12-03 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Male to Female TR1 Style Locking Connectors Links directly into gear equipped with TR1 type locking power inlets and outlets
• Twist Lock Latching System Fast push and twist connection that stays locked under vibration and cable tension
• Lockable 20A Single Phase Capacity Enough headroom for powered speakers, moving heads, amps, and media servers
• Connector With Breaking Capacity (CBC) Can be connected or disconnected under load or live
• Ground Contact Mates First Twist action grounds before neutral and line make up for a safer connection
• IP65 Dust and Water Protection Rating Holds up to outdoor stages, damp load ins, and dusty festival grounds
• 12AWG Pure Copper Conductors Lower voltage drop and less heat buildup under sustained load
• UL and cUL Tested Components Meets the expectations of venues, rental houses, and production managers
• Safer Than IEC 60320 C13/C14 Couplers Locking 3 conductor design replaces friction fit consumer style couplers
• 3 Ft. Working Length Sized for rack patching, stacked speaker links, and adjacent fixture jumps
• Extremely Robust and Reliable Build Rugged construction for repeated coiling, transport, and daily show use
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Power Connection equipped devices and compatible connectors

Compatibility

Power Connection equipped devices and compatible connectors

Product details

Introducing the ProX XC-TR1FM12-03 3 Ft. Male to Female 12AWG Locking Power Link Cable, a 20A power patch built for the short runs that hold your rig together. This is the cable you reach for when two powered boxes sit side by side in a rack, when you need to link a pair of active speakers on the same pole, or when a lighting fixture has to pull power from the unit next to it. It locks in, it stays in, and it does not walk out of the socket when someone drags a case across the stage.

TR1 Style Locking Connectors On Both Ends The XC-TR1FM12-03 uses a male connector on one end and a female connector on the other, so it links directly into gear equipped with TR1 type locking power inlets and outlets. These connectors are built by YongSheng and are compatible with TR1 style power connection devices already in your setup. The male end plugs into the source, the female end feeds the next unit, and the run continues from there.

Twist And Lock In One Motion The latching system is fast. Push in, twist, done. No screws, no tools, no fumbling in the dark behind a rack. The lock holds the connection under stage vibration, foot traffic, and cable tension, which is exactly where standard friction fit couplers give up.

Rated for 20A Single Phase The XC-TR1FM12-03 carries a lockable single phase 20A capacity. That headroom covers powered speakers, moving heads, media servers, amplifiers, and most of the active gear in a working production rig.

Connector With Breaking Capacity This is a CBC rated connection, meaning it can be connected or disconnected under load or live. That matters on a busy stage where you do not always have the luxury of killing power first. It is a working feature, not a spec sheet line.

Ground Mates First for a Safer Connection The twist action mates the ground contact before the neutral and line contacts make up. You get an electrically safe connection every time, and a meaningfully safer setup than the IEC 60320 C13/C14 couplers found on consumer components, computers, and power supplies.

IP65 Rated Against Dust and Water The connectors carry an IP65 dust and water protection rating. Outdoor stages, tented events, damp load ins, and dusty festival grounds are all part of the job, and this cable is built to keep working through them.

12AWG Pure Copper Conductors Inside the jacket you get 12AWG pure copper conductors. Heavier gauge means lower voltage drop and less heat under sustained load, which protects both the cable and the gear pulling through it. Pure copper also holds up better to repeated coiling and uncoiling than cheaper conductor blends.

UL and cUL Tested Components The XC-TR1FM12-03 is built with UL and cUL tested components, so it meets the expectations of venues, rental houses, and production managers who check before they plug in.

A 3 Ft. Length That Solves Real Problems Three feet is short on purpose. It is the right call for rack to rack patching, linking stacked or paired powered speakers, jumping between adjacent lighting fixtures on the same truss, and any spot where a longer cable would just become slack to coil and hide. Less excess cable means cleaner sightlines and faster teardown.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-TR1FM12-03 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Male to Female TR1 Style Locking Connectors Links directly into gear equipped with TR1 type locking power inlets and outlets
• Twist Lock Latching System Fast push and twist connection that stays locked under vibration and cable tension
• Lockable 20A Single Phase Capacity Enough headroom for powered speakers, moving heads, amps, and media servers
• Connector With Breaking Capacity (CBC) Can be connected or disconnected under load or live
• Ground Contact Mates First Twist action grounds before neutral and line make up for a safer connection
• IP65 Dust and Water Protection Rating Holds up to outdoor stages, damp load ins, and dusty festival grounds
• 12AWG Pure Copper Conductors Lower voltage drop and less heat buildup under sustained load
• UL and cUL Tested Components Meets the expectations of venues, rental houses, and production managers
• Safer Than IEC 60320 C13/C14 Couplers Locking 3 conductor design replaces friction fit consumer style couplers
• 3 Ft. Working Length Sized for rack patching, stacked speaker links, and adjacent fixture jumps
• Extremely Robust and Reliable Build Rugged construction for repeated coiling, transport, and daily show use
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.