6FT 12AWG NEMA 5-15P Edison Male to REAN powerCON TRUE1 Female Locking Power Cable – IP65

Overview

Introducing the ProX XC-TR1FE12-06, a 6 ft 12AWG locking power cable built for the moment when a stagehand kicks a cable run and the show has to keep going. This cable pairs a standard Edison wall plug with a twist lock REAN® by NEUTRIK® powerCON TRUE1® connector, so your moving heads, LED washes, powered speakers, and rack gear stay powered through vibration, foot traffic, and quick changeovers. For touring techs, rental houses, production companies, and install crews, it replaces the weakest link in most power runs: the connector that pops loose at the worst possible time.

REAN® by NEUTRIK® powerCON TRUE1® X-Series Female Connector The device end of the XC-TR1FE12-06 terminates in the RCAC3F-X-000-1 X-Series female connector, a locking 20A power connector trusted worldwide in professional lighting and touring rigs. It twists and latches into place, and it will not back out on its own. This is the same connector standard you already see on the back of pro fixtures and powered loudspeakers, so it drops straight into gear you own today.

Breaking Capacity for Connection Under Load The TRUE1 X-Series connector carries breaking capacity, or CBC, which means it is rated to be connected and disconnected under load when the situation calls for it. That matters during a fast set change or a fixture swap when killing power at the distro is not an option.

IP65 Rated When Mated With the connectors joined, the TRUE1 connection carries an IP65 rating against dust and water. Outdoor stages, tented events, festival grounds, and dusty load ins all put power connections at risk, and this cable is built to hold up in those conditions.

Ground First Contact Design The connector is designed so the ground contact engages before the current carrying pins. It is a small detail that adds a real layer of electrical safety every time you plug in.

NEMA 5-15P Edison Male Plug The source end uses a standard male Edison NEMA 5-15P plug, so it drops into any common wall outlet, power strip, or distro output without an adapter. You get pro grade locking protection at the fixture while keeping the input side universal.

12AWG Pure Copper Conductors Inside the jacket, 12AWG pure copper conductors handle serious current with minimal voltage drop. Thin copper clad aluminum cable heats up and starves fixtures at the end of a run. Pure copper at 12AWG keeps voltage where it belongs, which protects your amplifiers, dimmers, and LED drivers over long shows.

UL and cUL Certified Components The cable is built with UL and cUL certified components, so it meets recognized safety and compliance standards for professional venues, houses of worship, theaters, and permanent installations that get inspected.

6 ft Working Length At 6 ft, this length is sized for fixture to truss drops, short jumps from a distro to a nearby speaker, and rack interior runs where extra cable just becomes clutter. Longer runs in the same series are available when you need to reach farther.

Typical Applications
Moving head lighting fixtures
LED stage lighting systems
Powered PA speakers
Touring lighting rigs
DJ production setups
Power distribution systems
Concert stage equipment

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real world feedback directly shapes the products we bring to market. The ProX XC-TR1FE12-06 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands on expertise and a brand that has never stopped raising the standard for live performance gear.

• REAN® by NEUTRIK® powerCON TRUE1® X-Series Female Connector RCAC3F-X-000-1 locking 20A connector on the device end
• Twist Lock Latching System Secures the connection and prevents accidental unplugging during operation
• Breaking Capacity (CBC) Rated for connection and disconnection under load
• IP65 Rated When Mated Dust and water protection for indoor and outdoor production
• Ground First Contact Ground engages before current carrying pins for added electrical safety
• Male NEMA 5-15P Edison Plug Standard Edison input works with any common outlet, power strip, or distro
• 12AWG Pure Copper Conductors High current capacity with reduced voltage drop over the run
• UL and cUL Certified Components Meets recognized safety and compliance standards
• 6 ft Length Sized for fixture drops, short distro jumps, and rack interior runs
• Built for Touring and Install Stage lighting, moving heads, powered speakers, DJ rigs, theaters, houses of worship, and AV installations
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

NEMA 5-15P to Male for Power Connection  compatible devices

Compatibility

NEMA 5-15P to Male for Power Connection  compatible devices

Product details

Introducing the ProX XC-TR1FE12-06, a 6 ft 12AWG locking power cable built for the moment when a stagehand kicks a cable run and the show has to keep going. This cable pairs a standard Edison wall plug with a twist lock REAN® by NEUTRIK® powerCON TRUE1® connector, so your moving heads, LED washes, powered speakers, and rack gear stay powered through vibration, foot traffic, and quick changeovers. For touring techs, rental houses, production companies, and install crews, it replaces the weakest link in most power runs: the connector that pops loose at the worst possible time.

REAN® by NEUTRIK® powerCON TRUE1® X-Series Female Connector The device end of the XC-TR1FE12-06 terminates in the RCAC3F-X-000-1 X-Series female connector, a locking 20A power connector trusted worldwide in professional lighting and touring rigs. It twists and latches into place, and it will not back out on its own. This is the same connector standard you already see on the back of pro fixtures and powered loudspeakers, so it drops straight into gear you own today.

Breaking Capacity for Connection Under Load The TRUE1 X-Series connector carries breaking capacity, or CBC, which means it is rated to be connected and disconnected under load when the situation calls for it. That matters during a fast set change or a fixture swap when killing power at the distro is not an option.

IP65 Rated When Mated With the connectors joined, the TRUE1 connection carries an IP65 rating against dust and water. Outdoor stages, tented events, festival grounds, and dusty load ins all put power connections at risk, and this cable is built to hold up in those conditions.

Ground First Contact Design The connector is designed so the ground contact engages before the current carrying pins. It is a small detail that adds a real layer of electrical safety every time you plug in.

NEMA 5-15P Edison Male Plug The source end uses a standard male Edison NEMA 5-15P plug, so it drops into any common wall outlet, power strip, or distro output without an adapter. You get pro grade locking protection at the fixture while keeping the input side universal.

12AWG Pure Copper Conductors Inside the jacket, 12AWG pure copper conductors handle serious current with minimal voltage drop. Thin copper clad aluminum cable heats up and starves fixtures at the end of a run. Pure copper at 12AWG keeps voltage where it belongs, which protects your amplifiers, dimmers, and LED drivers over long shows.

UL and cUL Certified Components The cable is built with UL and cUL certified components, so it meets recognized safety and compliance standards for professional venues, houses of worship, theaters, and permanent installations that get inspected.

6 ft Working Length At 6 ft, this length is sized for fixture to truss drops, short jumps from a distro to a nearby speaker, and rack interior runs where extra cable just becomes clutter. Longer runs in the same series are available when you need to reach farther.

Typical Applications
Moving head lighting fixtures
LED stage lighting systems
Powered PA speakers
Touring lighting rigs
DJ production setups
Power distribution systems
Concert stage equipment

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real world feedback directly shapes the products we bring to market. The ProX XC-TR1FE12-06 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• REAN® by NEUTRIK® powerCON TRUE1® X-Series Female Connector RCAC3F-X-000-1 locking 20A connector on the device end
• Twist Lock Latching System Secures the connection and prevents accidental unplugging during operation
• Breaking Capacity (CBC) Rated for connection and disconnection under load
• IP65 Rated When Mated Dust and water protection for indoor and outdoor production
• Ground First Contact Ground engages before current carrying pins for added electrical safety
• Male NEMA 5-15P Edison Plug Standard Edison input works with any common outlet, power strip, or distro
• 12AWG Pure Copper Conductors High current capacity with reduced voltage drop over the run
• UL and cUL Certified Components Meets recognized safety and compliance standards
• 6 ft Length Sized for fixture drops, short distro jumps, and rack interior runs
• Built for Touring and Install Stage lighting, moving heads, powered speakers, DJ rigs, theaters, houses of worship, and AV installations
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.