10PCS 6' FT Dual Powerkon to Dual DMX Combo Link Jumper Cable

Overview

Featuring the ProX XC-TR112-DMX6 6' Dual PowerKon to Dual DMX 3-Pin Combo Link Jumper Cable, the longer-reach solution for live production professionals who need power and DMX signal to travel together across a greater span of their rig. Whether you are lighting a truss run, powering fixtures across a wider stage setup, or simply need a bit more reach between daisy-chained units, the ProX XC-TR112-DMX6 delivers both connections in a single organized cable run. No more running two separate lines to each fixture. No more cable clutter eating up your time during load-in. This combo jumper keeps your lighting rig clean, your stage organized, and your setup moving at the pace that touring and live event production demands.

Dual Combo Connection Both ends of this cable are fitted with a PowerKon connector and an XLR 3-pin DMX connector side by side. Each end handles power and DMX signal simultaneously, so one cable per fixture does the job that two cables used to.

20 AWG Oxygen-Free Copper Conductors Built with 20 AWG OFC conductors, the ProX XC-TR112-DMX6 maintains clean, low-resistance conductivity across its full 6-foot length. Oxygen-free copper keeps interference out and signal quality consistent from one end to the other.

93% Braided OFC Copper Shield A 93% braided copper compact shield surrounds the conductors to block noise and protect DMX signal integrity in electrically demanding live production environments. This level of shielding ensures your lighting control signal arrives clean, even when the cable runs near power sources or other interference.

Compact Cable Diameter The reduced diameter is not just about handling. It actively works to decrease eddy currents, helping maintain signal quality over the full cable run while keeping your bundle manageable.

Extra Durable, Flexible Construction Tour-grade flexibility means this cable handles repeated coiling, tight storage, and constant use without cracking or stiffening up. It is built to go out with the rig and come back ready to go again.

6-Foot Reach At 6 feet, this cable gives you the flexibility to span greater distances between fixtures without excess slack or the need for additional extension runs. It is the right length when your 3-foot jumper just does not reach.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-TR112-DMX6 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Dual Combo Connectors on Each End PowerKon connector paired with an XLR 3-pin DMX connector on both sides for simultaneous power and DMX signal in a single run
• 20 AWG Oxygen-Free Copper (OFC) Conductors Clean, low-resistance conductivity for reliable power and signal delivery over the full 6-foot length
• 93% Braided OFC Copper Shield High-coverage shielding reduces noise and protects DMX signal integrity in demanding live production environments
• Compact Cable Diameter Minimizes eddy currents and keeps cable bundles clean and manageable
• Extra Durable and Flexible Construction Tour-grade build engineered for repeated coiling, tight storage, and long-term reliability
• 6-Foot Jumper Length Greater reach for wider fixture spacing and longer daisy-chain runs
• Simplifies Cable Management Combining power and DMX into one run cuts clutter and speeds up rigging on complex lighting setups
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Dual PowerKon to Dual DMX 3-Pin

Compatibility

Dual PowerKon to Dual DMX 3-Pin

Product details

Featuring the ProX XC-TR112-DMX6 6' Dual PowerKon to Dual DMX 3-Pin Combo Link Jumper Cable, the longer-reach solution for live production professionals who need power and DMX signal to travel together across a greater span of their rig. Whether you are lighting a truss run, powering fixtures across a wider stage setup, or simply need a bit more reach between daisy-chained units, the ProX XC-TR112-DMX6 delivers both connections in a single organized cable run. No more running two separate lines to each fixture. No more cable clutter eating up your time during load-in. This combo jumper keeps your lighting rig clean, your stage organized, and your setup moving at the pace that touring and live event production demands.

Dual Combo Connection Both ends of this cable are fitted with a PowerKon connector and an XLR 3-pin DMX connector side by side. Each end handles power and DMX signal simultaneously, so one cable per fixture does the job that two cables used to.

20 AWG Oxygen-Free Copper Conductors Built with 20 AWG OFC conductors, the ProX XC-TR112-DMX6 maintains clean, low-resistance conductivity across its full 6-foot length. Oxygen-free copper keeps interference out and signal quality consistent from one end to the other.

93% Braided OFC Copper Shield A 93% braided copper compact shield surrounds the conductors to block noise and protect DMX signal integrity in electrically demanding live production environments. This level of shielding ensures your lighting control signal arrives clean, even when the cable runs near power sources or other interference.

Compact Cable Diameter The reduced diameter is not just about handling. It actively works to decrease eddy currents, helping maintain signal quality over the full cable run while keeping your bundle manageable.

Extra Durable, Flexible Construction Tour-grade flexibility means this cable handles repeated coiling, tight storage, and constant use without cracking or stiffening up. It is built to go out with the rig and come back ready to go again.

6-Foot Reach At 6 feet, this cable gives you the flexibility to span greater distances between fixtures without excess slack or the need for additional extension runs. It is the right length when your 3-foot jumper just does not reach.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-TR112-DMX6 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Dual Combo Connectors on Each End PowerKon connector paired with an XLR 3-pin DMX connector on both sides for simultaneous power and DMX signal in a single run
• 20 AWG Oxygen-Free Copper (OFC) Conductors Clean, low-resistance conductivity for reliable power and signal delivery over the full 6-foot length
• 93% Braided OFC Copper Shield High-coverage shielding reduces noise and protects DMX signal integrity in demanding live production environments
• Compact Cable Diameter Minimizes eddy currents and keeps cable bundles clean and manageable
• Extra Durable and Flexible Construction Tour-grade build engineered for repeated coiling, tight storage, and long-term reliability
• 6-Foot Jumper Length Greater reach for wider fixture spacing and longer daisy-chain runs
• Simplifies Cable Management Combining power and DMX into one run cuts clutter and speeds up rigging on complex lighting setups
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.