75' FT 14AWG Powerkon to Dual XLR Combo Link Jumper Cable
75' FT 14AWG Powerkon to Dual XLR Combo Link Jumper Cable
SKU: XC-PWC14-DXLR75
Overview
Featuring the ProX XC-PWC14-DXLR75 75' FT 14AWG Powerkon to Dual XLR Combo Link Jumper Cable, a longer-reach solution for the jobs where a 50 foot run just doesn't get you across the room. When power and audio both need to travel from the same source to the same fixture, running that distance twice, once for power and once for XLR, doubles your cable count for no good reason. The ProX DXLR75 solves that by combining both into one 75 foot jumper, with 2x PowerKon connectors and 2x XLR connectors on each end, so bigger stages and longer throws don't mean bigger cable headaches.
Locking PowerKon Connections
anchor both ends of the run. The PowerKon connector is a 3 conductor, locking power connector that outperforms the standard IEC 60320 C13/C14 connectors found on most consumer gear. Its twist lock design is sequenced on purpose: the ground contact mates first, and only then do the neutral and line contacts connect, so every run starts grounded before power ever reaches it.
Shielded for Long Cable Runs
because the longer a signal travels, the more noise it can pick up along the way. The XC-PWC14-DXLR75 uses a 93% braided OFC copper compact shield to protect pure sound transfer over the full 75 feet, along with a compact cable diameter that helps cut down on eddy currents across the run.
Coil Construction Built to Last
is what keeps a cable like this working show after show. Bending and twisting are no match for it, and the Complete Coil weave is held to tight, consistent tolerances on purpose, since that consistency is what determines how clean and accurate the sound stays at the end of a 75 foot run.
Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.
ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX DXLR75 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.
- 14AWG PowerKon + XLR 20AWG OFC Conductors - oxygen free copper for reliable power delivery and clean signal transfer over long runs
- Black PVC Jacket for durability, flexibility, and low visibility on stage
- Cotton Plus Tinned Copper Braid Shield (85% Coverage) for added noise protection
- Compact Cable Diameter to decrease eddy currents along the run
- Polyethylene Inner Jacket for added protection under the outer sheath
- Duofoil® (100% Coverage) for full wrap shielding
- ProX Limited Warranty
All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
PowerKon to Dual XLR Combo Link Jumper Cable
Compatibility
PowerKon to Dual XLR Combo Link Jumper Cable
Product details
Featuring the ProX XC-PWC14-DXLR75 75' FT 14AWG Powerkon to Dual XLR Combo Link Jumper Cable, a longer-reach solution for the jobs where a 50 foot run just doesn't get you across the room. When power and audio both need to travel from the same source to the same fixture, running that distance twice, once for power and once for XLR, doubles your cable count for no good reason. The ProX DXLR75 solves that by combining both into one 75 foot jumper, with 2x PowerKon connectors and 2x XLR connectors on each end, so bigger stages and longer throws don't mean bigger cable headaches.
Locking PowerKon Connections
anchor both ends of the run. The PowerKon connector is a 3 conductor, locking power connector that outperforms the standard IEC 60320 C13/C14 connectors found on most consumer gear. Its twist lock design is sequenced on purpose: the ground contact mates first, and only then do the neutral and line contacts connect, so every run starts grounded before power ever reaches it.
Shielded for Long Cable Runs
because the longer a signal travels, the more noise it can pick up along the way. The XC-PWC14-DXLR75 uses a 93% braided OFC copper compact shield to protect pure sound transfer over the full 75 feet, along with a compact cable diameter that helps cut down on eddy currents across the run.
Coil Construction Built to Last
is what keeps a cable like this working show after show. Bending and twisting are no match for it, and the Complete Coil weave is held to tight, consistent tolerances on purpose, since that consistency is what determines how clean and accurate the sound stays at the end of a 75 foot run.
Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.
ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX DXLR75 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.
Key features
- 14AWG PowerKon + XLR 20AWG OFC Conductors - oxygen free copper for reliable power delivery and clean signal transfer over long runs
- Black PVC Jacket for durability, flexibility, and low visibility on stage
- Cotton Plus Tinned Copper Braid Shield (85% Coverage) for added noise protection
- Compact Cable Diameter to decrease eddy currents along the run
- Polyethylene Inner Jacket for added protection under the outer sheath
- Duofoil® (100% Coverage) for full wrap shielding
- ProX Limited Warranty
All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.