10 Ft. 14 AWG High Performance Power Connection Link Grey Male to Blue Male for Power Connection compatible devices

Overview

Introducing the ProX XC-PWC14-10, a 10 Ft. 14 AWG high performance power link cable built for the crews who need real distance between devices without dragging a second power drop across the stage. This is the length you grab when the next fixture is a full truss section away, when the sub sits on the deck and the top box is up on a pole, or when your rack lives offstage and the gear it powers does not. It carries true 14 AWG copper, locks in with a quarter turn, and holds an IP65 rating for dust and water. For anyone running locking power connectors, this is the link cable that stretches the chain further without weakening it.

Grey to Blue Link Configuration

The XC-PWC14-10 is wired as a true link cable with a grey connector on one end and a blue connector on the other. The grey end pulls power out of the device ahead of it in the chain, and the blue end feeds power into the next device down the line. That color coded layout takes the guesswork out of a dark stage and keeps your daisy chain flowing the right direction every single time.

Twist Lock Latching System

Both ends use a fast and easy twist lock latching system that seats with a quarter turn and stays locked. On a 10 Ft. run there is more cable on the floor and more chances for someone to catch it, which is exactly why a locking connector matters here. The design is a 3 conductor locking power connector that delivers a safer connection than the IEC 60320 C13/C14 style connectors commonly found on consumer audio components, computers, and power adapters.

Ground First Mating Sequence

The twist connector mates the ground contact before it connects the neutral and line contacts. The chassis is grounded before power ever reaches the device, which is what you want any time you are patching gear live on a working stage.

IP65 Dust and Water Protection

Rated IP65 for dust and water protection, the XC-PWC14-10 is ready for outdoor festivals, rooftop parties, tented stages, and every load in where the weather does not check your schedule first.

14 AWG Pure Bare Copper Conductors Inside the jacket you get pure, bare copper conductors at a true 14 AWG. Heavier copper means lower resistance and less voltage drop, and that matters even more as the run gets longer. At 10 Ft., amplifiers and fixtures still get steady current when they pull hardest during peak demand. Undersized power cable is one of the quietest causes of an underperforming rig, and this one does not cut that corner.

YongSheng Connectors and UL Tested Components

The cable is terminated with YongSheng connectors and built using UL and cUL tested components. Extremely robust and reliable by design, it delivers the same performance from the same part number every time you reorder.

10 Ft. of Working Reach At 10 Ft., this is the length that solves the gaps a 6 Ft. jumper cannot. Fixture to fixture across a wider truss spacing, floor sub to pole mounted top, stage left to stage right on a small deck, or amp rack to a powered cabinet parked out of the way. Fewer distro drops, cleaner cable paths, faster setup.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-PWC14-10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Grey to Blue Link Cable Grey connector for power out, blue connector for power in, for clean daisy chaining between devices
• Fast Twist Lock Latching System Quarter turn lock that will not shake loose under stage traffic or cable strain
• 3 Conductor Locking Power Connector Safer connection than standard IEC 60320 C13/C14 style connectors
• Ground First Mating Ground contact connects before neutral and line for an electrically safe connection
• IP65 Dust and Water Protection Rating Ready for outdoor stages, tents, and unpredictable weather
• 14 AWG Pure Bare Copper Conductors Low resistance and minimal voltage drop across the full 10 Ft. run
• YongSheng Connectors Consistent, professional grade terminations on both ends
• UL and cUL Tested Components Built with tested components for reliable, repeatable performance
• 10 Ft. Length Extra reach for wider truss spacing, floor to pole runs, and offstage rack positions
• Extremely Robust and Reliable Built for the daily abuse of load in, show, and load out
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Power Connection Grey Male to Blue Male for Power Connection compatible devices

Compatibility

Power Connection Grey Male to Blue Male for Power Connection compatible devices

Product details

Introducing the ProX XC-PWC14-10, a 10 Ft. 14 AWG high performance power link cable built for the crews who need real distance between devices without dragging a second power drop across the stage. This is the length you grab when the next fixture is a full truss section away, when the sub sits on the deck and the top box is up on a pole, or when your rack lives offstage and the gear it powers does not. It carries true 14 AWG copper, locks in with a quarter turn, and holds an IP65 rating for dust and water. For anyone running locking power connectors, this is the link cable that stretches the chain further without weakening it.

Grey to Blue Link Configuration

The XC-PWC14-10 is wired as a true link cable with a grey connector on one end and a blue connector on the other. The grey end pulls power out of the device ahead of it in the chain, and the blue end feeds power into the next device down the line. That color coded layout takes the guesswork out of a dark stage and keeps your daisy chain flowing the right direction every single time.

Twist Lock Latching System

Both ends use a fast and easy twist lock latching system that seats with a quarter turn and stays locked. On a 10 Ft. run there is more cable on the floor and more chances for someone to catch it, which is exactly why a locking connector matters here. The design is a 3 conductor locking power connector that delivers a safer connection than the IEC 60320 C13/C14 style connectors commonly found on consumer audio components, computers, and power adapters.

Ground First Mating Sequence

The twist connector mates the ground contact before it connects the neutral and line contacts. The chassis is grounded before power ever reaches the device, which is what you want any time you are patching gear live on a working stage.

IP65 Dust and Water Protection

Rated IP65 for dust and water protection, the XC-PWC14-10 is ready for outdoor festivals, rooftop parties, tented stages, and every load in where the weather does not check your schedule first.

14 AWG Pure Bare Copper Conductors Inside the jacket you get pure, bare copper conductors at a true 14 AWG. Heavier copper means lower resistance and less voltage drop, and that matters even more as the run gets longer. At 10 Ft., amplifiers and fixtures still get steady current when they pull hardest during peak demand. Undersized power cable is one of the quietest causes of an underperforming rig, and this one does not cut that corner.

YongSheng Connectors and UL Tested Components

The cable is terminated with YongSheng connectors and built using UL and cUL tested components. Extremely robust and reliable by design, it delivers the same performance from the same part number every time you reorder.

10 Ft. of Working Reach At 10 Ft., this is the length that solves the gaps a 6 Ft. jumper cannot. Fixture to fixture across a wider truss spacing, floor sub to pole mounted top, stage left to stage right on a small deck, or amp rack to a powered cabinet parked out of the way. Fewer distro drops, cleaner cable paths, faster setup.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-PWC14-10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Grey to Blue Link Cable Grey connector for power out, blue connector for power in, for clean daisy chaining between devices
• Fast Twist Lock Latching System Quarter turn lock that will not shake loose under stage traffic or cable strain
• 3 Conductor Locking Power Connector Safer connection than standard IEC 60320 C13/C14 style connectors
• Ground First Mating Ground contact connects before neutral and line for an electrically safe connection
• IP65 Dust and Water Protection Rating Ready for outdoor stages, tents, and unpredictable weather
• 14 AWG Pure Bare Copper Conductors Low resistance and minimal voltage drop across the full 10 Ft. run
• YongSheng Connectors Consistent, professional grade terminations on both ends
• UL and cUL Tested Components Built with tested components for reliable, repeatable performance
• 10 Ft. Length Extra reach for wider truss spacing, floor to pole runs, and offstage rack positions
• Extremely Robust and Reliable Built for the daily abuse of load in, show, and load out
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.