10 Ft Dual 1/4" TS Male to Dual XLR Male Unbalanced Audio Cable

Overview

Featuring the ProX XC-DPXM10 10 Ft. Dual 1/4" TS Male to Dual XLR Male Unbalanced Audio Cable. Not every rig has the mixer sitting right next to the source. Sometimes the keyboard is out front while the mixer is off to the side, or the DJ table is on one end of the booth and the powered speakers are on the other. The ProX XC-DPXM10 gives you 10 ft. of reach to cover that distance, taking a stereo source with two 1/4" TS outputs and landing it on two XLR inputs, all in one cable. Two 1/4" TS male plugs on one end, two XLR male plugs on the other, and no need to run and manage two separate cables across the floor.

Connector Configuration

Each 1/4" TS plug connects to its own XLR plug, so the cable carries two fully separate channels from end to end. Your left output lands on one input and your right output lands on another. Nothing is split or combined along the way, so your stereo source shows up at the mixer the same way it left the instrument.

Color Coded Channels

A red band on one plug at each end gives you a quick way to tell the channels apart. On a longer cable, where the two ends can be far apart and out of sight of each other, that marking saves you from guessing which side is which.

Dual Cable Design

Both channels run together inside one PVC outer jacket. Over a 10 ft. run, that matters. One cable is easier to tape down, easier to route around stands and cases, and easier to coil at the end of the night than two that keep pulling apart.

Shielded Channels

Each channel has its own copper shield to help keep hum and outside interference out. On a longer run, where the cable may pass near power cords, lighting, and other gear, that shielding helps keep both channels clean.

Unbalanced Signal

TS outputs are unbalanced, and this cable carries that signal into your XLR inputs without changing it to balanced. At 10 ft., this works well in most setups. If your room has a lot of electrical noise, keep the cable away from power runs where you can. And if you need to go farther than 10 ft., a DI box at the source is the right way to do it.

Connectors and Contacts

Gold plated contacts on all four plugs resist corrosion and give you a solid, clean connection every time. All metal connector housings are built to take the regular plugging, unplugging, and packing that comes with working gigs.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when gear fails during a show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real world feedback directly shapes the products we bring to market. The ProX XC-DPXM10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands on expertise and a brand that has never stopped raising the standard for live performance gear.

• Connector Configuration: Dual 1/4" TS male to dual XLR male
• Two Independent Channels: Each 1/4" plug wired to its own XLR plug, not a splitter
• Cable Length: 10 ft. for longer runs between source and mixer, stage box, or speakers
• Color Coded Channels: Red band on one plug at each end for quick channel ID
• Dual Cable Design: Both channels run side by side in one PVC jacket, easy to tape down, route, and coil
• Shielded Channels: Each channel has its own copper shield to help reduce hum and interference
• Gold Plated Contacts: Clean, corrosion resistant connection on every plug
• All Metal Connectors: Built for regular gig use
• Signal Type: Unbalanced audio, two channel
• Use Case: Stereo keyboards, synths, drum machines, and audio interface line outputs into XLR inputs on mixers, stage boxes, and powered speakers across a larger setup
• Packaging: Master box qty 10 pcs
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Dual TS-M to Dual XLR-Male

Compatibility

Dual TS-M to Dual XLR-Male

Product details

Featuring the ProX XC-DPXM10 10 Ft. Dual 1/4" TS Male to Dual XLR Male Unbalanced Audio Cable. Not every rig has the mixer sitting right next to the source. Sometimes the keyboard is out front while the mixer is off to the side, or the DJ table is on one end of the booth and the powered speakers are on the other. The ProX XC-DPXM10 gives you 10 ft. of reach to cover that distance, taking a stereo source with two 1/4" TS outputs and landing it on two XLR inputs, all in one cable. Two 1/4" TS male plugs on one end, two XLR male plugs on the other, and no need to run and manage two separate cables across the floor.

Connector Configuration

Each 1/4" TS plug connects to its own XLR plug, so the cable carries two fully separate channels from end to end. Your left output lands on one input and your right output lands on another. Nothing is split or combined along the way, so your stereo source shows up at the mixer the same way it left the instrument.

Color Coded Channels

A red band on one plug at each end gives you a quick way to tell the channels apart. On a longer cable, where the two ends can be far apart and out of sight of each other, that marking saves you from guessing which side is which.

Dual Cable Design

Both channels run together inside one PVC outer jacket. Over a 10 ft. run, that matters. One cable is easier to tape down, easier to route around stands and cases, and easier to coil at the end of the night than two that keep pulling apart.

Shielded Channels

Each channel has its own copper shield to help keep hum and outside interference out. On a longer run, where the cable may pass near power cords, lighting, and other gear, that shielding helps keep both channels clean.

Unbalanced Signal

TS outputs are unbalanced, and this cable carries that signal into your XLR inputs without changing it to balanced. At 10 ft., this works well in most setups. If your room has a lot of electrical noise, keep the cable away from power runs where you can. And if you need to go farther than 10 ft., a DI box at the source is the right way to do it.

Connectors and Contacts

Gold plated contacts on all four plugs resist corrosion and give you a solid, clean connection every time. All metal connector housings are built to take the regular plugging, unplugging, and packing that comes with working gigs.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when gear fails during a show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real world feedback directly shapes the products we bring to market. The ProX XC-DPXM10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Connector Configuration: Dual 1/4" TS male to dual XLR male
• Two Independent Channels: Each 1/4" plug wired to its own XLR plug, not a splitter
• Cable Length: 10 ft. for longer runs between source and mixer, stage box, or speakers
• Color Coded Channels: Red band on one plug at each end for quick channel ID
• Dual Cable Design: Both channels run side by side in one PVC jacket, easy to tape down, route, and coil
• Shielded Channels: Each channel has its own copper shield to help reduce hum and interference
• Gold Plated Contacts: Clean, corrosion resistant connection on every plug
• All Metal Connectors: Built for regular gig use
• Signal Type: Unbalanced audio, two channel
• Use Case: Stereo keyboards, synths, drum machines, and audio interface line outputs into XLR inputs on mixers, stage boxes, and powered speakers across a larger setup
• Packaging: Master box qty 10 pcs
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.