10PCS 25 Ft. High Performance DMX Male 3-Pin to DMX Female 3-Pin Coupler Patch Cable

Overview

Featuring the ProX XC-DMX25 25 Ft. High Performance DMX Male 3-Pin to DMX Female 3-Pin Cable, the longest run in the ProX 3-pin DMX cable line and the one that handles the situations no shorter cable can reach. Twenty-five feet is the cable that goes from front-of-house to the stage lip, from a dimmer rack across the back wall of a venue to a fixture cluster, or from a controller positioned off-stage to the first point of a universe chain that spans a full production rig. At this length, the quality of the build is not a preference — it is a requirement. The ProX XC-DMX25 meets that requirement with the same verified electrical specs and construction quality found throughout the entire ProX DMX cable family.

Construction and Signal Path

The ProX XC-DMX25 is built on a twisted quad data cable design with polyethylene insulation on each conductor. Maintaining a nominal characteristic impedance of 110 ohms across a 25-foot length is where cable construction earns its keep. Deviation from that impedance causes reflections that can corrupt DMX data mid-chain, and the twisted quad geometry keeps it locked in. Duofoil shielding provides 100% coverage across every inch of the run, and a tinned copper braid adds 85% coverage on top. On a cable this long, the dual-layer shielding is not a spec sheet bullet point. It is the difference between a fixture chain that responds correctly and one that strobes, freezes, or drops out under the interference load of a working production environment.

Conductors and Transfer Quality

Conductors are 22 AWG tinned copper with gold and silver-plated contacts at both connectors. Nominal capacitance from conductor to conductor at 1 kHz is 12.8 pF/ft, with conductor-to-shield capacitance at 23 pF/ft. Nominal propagation velocity is 66%, with a nominal delay of 1.6 nanoseconds per foot. Nominal conductor DC resistance is 24 ohms per 1000 ft at 20 degrees C, and outer shield resistance is 3.4 ohms per 1000 ft under the same conditions. At 25 feet, cumulative resistance, capacitance, and delay all accumulate more than on shorter runs. These specs are selected to keep the XC-DMX25 well within DMX512 tolerance across the full length.

Jacket and Durability

The flexible PVC outer jacket is rated for an operating temperature range of -30 degrees C to +75 degrees C. Maximum recommended current is 2.1 amps per conductor at 25 degrees C. Twenty-five feet of cable takes real abuse on a touring schedule: coiled, dragged, stored, and deployed repeatedly across a full season. The PVC jacket handles all of it without developing the kinks, cracks, or stress points that compromise the internal geometry and invite signal problems.

Connectors

Both ends use 3-pin XLR-style DMX connectors with all-metal chassis construction and gold and silver-plated contacts. On a 25-foot run, a connector failure at either end takes down the entire downstream chain. These connectors are built to hold up through the repeated patching and repositioning that come with production work at this scale.

Testing and Quality Control

Every ProX XC-DMX25 is individually tested before it ships. Each unit is verified against spec. When a 25-foot cable comes off the truck and goes straight into a load-in, there is no time to troubleshoot a cable that should have worked. ProX tests every single one so you do not have to find out the hard way.

The Cable for the Longest Runs

Production managers, head electricians, AV rental companies, and touring lighting crews who regularly deal with the distances that shorter cables cannot cover will find the ProX XC-DMX25 is the right tool for the job. It is the cable that handles the full span of a large stage, the run from booth to rig, and every long-distance DMX chain in between.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-DMX25 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• 25 Ft. DMX Male 3-Pin to Female 3-Pin cable, the longest run in the ProX 3-pin DMX line, built for large stage spans, FOH-to-stage runs, and extended production installs
• 110-Ohm nominal characteristic impedance precisely matched to EIA-485 / DMX512 protocol requirements across the full 25-foot length
• Twisted quad data cable construction for stable, accurate DMX data transmission
• Dual-layer shielding: Duofoil (100% coverage) plus tinned copper braid (85% coverage) for maximum RF and EMI interference rejection across a long run
• 22 AWG tinned copper conductors for consistent, dependable conductivity
• Gold and silver-plated contacts for superior connection quality and corrosion resistance
• All-metal connector chassis at both ends for durability under demanding production use
• Flexible PVC outer jacket stays pliable across a wide temperature range
• Operating temperature range: -30 degrees C to +75 degrees C
• Nominal capacitance: 12.8 pF/ft conductor to conductor at 1 kHz; 23 pF/ft conductor to shield at 1 kHz
• Nominal propagation velocity: 66% / Nominal delay: 1.6 ns/ft
• Nominal conductor DC resistance: 24 ohms per 1000 ft at 20 degrees C
• Nominal outer shield DC resistance: 3.4 ohms per 1000 ft at 20 degrees C
• Maximum recommended current: 2.1 amps per conductor at 25 degrees C
• 100% individually tested before shipment
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

DMX-M to DMX-F (3-PIN)

Compatibility

DMX-M to DMX-F (3-PIN)

Product details

Featuring the ProX XC-DMX25 25 Ft. High Performance DMX Male 3-Pin to DMX Female 3-Pin Cable, the longest run in the ProX 3-pin DMX cable line and the one that handles the situations no shorter cable can reach. Twenty-five feet is the cable that goes from front-of-house to the stage lip, from a dimmer rack across the back wall of a venue to a fixture cluster, or from a controller positioned off-stage to the first point of a universe chain that spans a full production rig. At this length, the quality of the build is not a preference — it is a requirement. The ProX XC-DMX25 meets that requirement with the same verified electrical specs and construction quality found throughout the entire ProX DMX cable family.

Construction and Signal Path

The ProX XC-DMX25 is built on a twisted quad data cable design with polyethylene insulation on each conductor. Maintaining a nominal characteristic impedance of 110 ohms across a 25-foot length is where cable construction earns its keep. Deviation from that impedance causes reflections that can corrupt DMX data mid-chain, and the twisted quad geometry keeps it locked in. Duofoil shielding provides 100% coverage across every inch of the run, and a tinned copper braid adds 85% coverage on top. On a cable this long, the dual-layer shielding is not a spec sheet bullet point. It is the difference between a fixture chain that responds correctly and one that strobes, freezes, or drops out under the interference load of a working production environment.

Conductors and Transfer Quality

Conductors are 22 AWG tinned copper with gold and silver-plated contacts at both connectors. Nominal capacitance from conductor to conductor at 1 kHz is 12.8 pF/ft, with conductor-to-shield capacitance at 23 pF/ft. Nominal propagation velocity is 66%, with a nominal delay of 1.6 nanoseconds per foot. Nominal conductor DC resistance is 24 ohms per 1000 ft at 20 degrees C, and outer shield resistance is 3.4 ohms per 1000 ft under the same conditions. At 25 feet, cumulative resistance, capacitance, and delay all accumulate more than on shorter runs. These specs are selected to keep the XC-DMX25 well within DMX512 tolerance across the full length.

Jacket and Durability

The flexible PVC outer jacket is rated for an operating temperature range of -30 degrees C to +75 degrees C. Maximum recommended current is 2.1 amps per conductor at 25 degrees C. Twenty-five feet of cable takes real abuse on a touring schedule: coiled, dragged, stored, and deployed repeatedly across a full season. The PVC jacket handles all of it without developing the kinks, cracks, or stress points that compromise the internal geometry and invite signal problems.

Connectors

Both ends use 3-pin XLR-style DMX connectors with all-metal chassis construction and gold and silver-plated contacts. On a 25-foot run, a connector failure at either end takes down the entire downstream chain. These connectors are built to hold up through the repeated patching and repositioning that come with production work at this scale.

Testing and Quality Control

Every ProX XC-DMX25 is individually tested before it ships. Each unit is verified against spec. When a 25-foot cable comes off the truck and goes straight into a load-in, there is no time to troubleshoot a cable that should have worked. ProX tests every single one so you do not have to find out the hard way.

The Cable for the Longest Runs

Production managers, head electricians, AV rental companies, and touring lighting crews who regularly deal with the distances that shorter cables cannot cover will find the ProX XC-DMX25 is the right tool for the job. It is the cable that handles the full span of a large stage, the run from booth to rig, and every long-distance DMX chain in between.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-DMX25 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• 25 Ft. DMX Male 3-Pin to Female 3-Pin cable, the longest run in the ProX 3-pin DMX line, built for large stage spans, FOH-to-stage runs, and extended production installs
• 110-Ohm nominal characteristic impedance precisely matched to EIA-485 / DMX512 protocol requirements across the full 25-foot length
• Twisted quad data cable construction for stable, accurate DMX data transmission
• Dual-layer shielding: Duofoil (100% coverage) plus tinned copper braid (85% coverage) for maximum RF and EMI interference rejection across a long run
• 22 AWG tinned copper conductors for consistent, dependable conductivity
• Gold and silver-plated contacts for superior connection quality and corrosion resistance
• All-metal connector chassis at both ends for durability under demanding production use
• Flexible PVC outer jacket stays pliable across a wide temperature range
• Operating temperature range: -30 degrees C to +75 degrees C
• Nominal capacitance: 12.8 pF/ft conductor to conductor at 1 kHz; 23 pF/ft conductor to shield at 1 kHz
• Nominal propagation velocity: 66% / Nominal delay: 1.6 ns/ft
• Nominal conductor DC resistance: 24 ohms per 1000 ft at 20 degrees C
• Nominal outer shield DC resistance: 3.4 ohms per 1000 ft at 20 degrees C
• Maximum recommended current: 2.1 amps per conductor at 25 degrees C
• 100% individually tested before shipment
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.