20PCS ProX 5 Ft STP Cat 6 Cable W-RJ45 for Network and Snake Box Connections
SKU: XC-CAT6-05 X20
Overview
Featuring the ProX XC-CAT6-05 5 Ft STP Cat 6 Cable with RJ45 Connectors, a fixed length shielded ethernet cable engineered to carry your network, audio, and DMX data cleanly without picking up noise along the way. Whether you're linking a stagebox to a switch across the stage, running a digital snake, or wiring a permanent AV install, this cable is built to handle the job and disappear into the rig.
Genuine ProX RJ45 Connectors
terminate both ends, giving this cable direct plug and play compatibility with standard network gear, stageboxes, switches, and snake systems already in your rig, so there is no adapter guesswork on load in.
Shielded Construction from the Outside In
protects your signal at every layer. An aluminum foil shield wraps the cable against outside interference, backed by a braided TC shield system to cut noise and hold onto signal purity, with a cotton and PP cross shield adding another layer of protection before you reach the conductor itself. That kind of layered shielding is what keeps a Cat 6 run clean when it is sitting next to lighting rigs, power distro, and RF gear on a live show.
19 x 0.12 Copper OFC Inner Conductor carries the actual signal, and ProX builds it from 100 percent pure copper wire rather than copper clad aluminum, keeping it fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards that require pure bare copper in communications cabling.
550MHz Bandwidth Performance gives this cable real headroom above the Cat 6 spec, which means cleaner data transfer for digital snakes, network audio, video, and DMX over IP setups where a dropped packet becomes a problem onstage. The cable also carries Complete Coil™ technology, engineered for consistent wave tolerances that hold accuracy and clarity across the full run.
Compact, Weatherproof, and Rated for the Road
with a 1/4 inch (6.8mm) outer diameter that keeps the cable easy to route and coil, a 1 inch minimum bending radius, and a 25 ft-lb maximum pulling tension for safe handling on load in and strike. The cable is rated IP65 for dust and waterproof protection in its mated condition, and every unit is individually tested for performance and quality before it ships. It complies with Cat 6 specifications under TIA/EIA 568B, ISO/IEC 11801, and EN 50173.
Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.
ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real world feedback directly shapes the products we bring to market. The ProX XC-CAT6-05 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands on expertise and a brand that has never stopped raising the standard for live performance gear.
- Genuine ProX RJ45 connectors on both ends for direct compatibility with standard network and stagebox gear
- Aluminum foil and braided TC shielding with cotton and PP cross shielding to block outside interference
- 19 x 0.12 Copper OFC inner conductor, 100% pure copper, compliant with UL Code 444 and TIA-568-C.2
- 550MHz bandwidth for strong performance on digital snakes, network audio, video, and DMX over IP
- Complete Coil™ technology for consistent wave tolerances and precise signal accuracy
- 1/4 in (6.8mm) outer diameter, 1 in minimum bending radius, 25 ft-lb maximum pulling tension
- IP65 rated, dust and waterproof in mated condition
- Individually tested and compliant with TIA/EIA 568B, ISO/IEC 11801, and EN 50173
- 5 ft fixed length, also available in 2 ft, 3 ft, 10 ft, 25 ft, 50 ft, 75 ft, 100 ft, 150 ft, 200 ft, and 300 ft
- ProX Limited Warranty
All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
RJ45 Female Cat 3, 5 & 6 Devices & Connections
Compatibility
RJ45 Female Cat 3, 5 & 6 Devices & Connections
Product details
Featuring the ProX XC-CAT6-05 5 Ft STP Cat 6 Cable with RJ45 Connectors, a fixed length shielded ethernet cable engineered to carry your network, audio, and DMX data cleanly without picking up noise along the way. Whether you're linking a stagebox to a switch across the stage, running a digital snake, or wiring a permanent AV install, this cable is built to handle the job and disappear into the rig.
Genuine ProX RJ45 Connectors
terminate both ends, giving this cable direct plug and play compatibility with standard network gear, stageboxes, switches, and snake systems already in your rig, so there is no adapter guesswork on load in.
Shielded Construction from the Outside In
protects your signal at every layer. An aluminum foil shield wraps the cable against outside interference, backed by a braided TC shield system to cut noise and hold onto signal purity, with a cotton and PP cross shield adding another layer of protection before you reach the conductor itself. That kind of layered shielding is what keeps a Cat 6 run clean when it is sitting next to lighting rigs, power distro, and RF gear on a live show.
19 x 0.12 Copper OFC Inner Conductor carries the actual signal, and ProX builds it from 100 percent pure copper wire rather than copper clad aluminum, keeping it fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards that require pure bare copper in communications cabling.
550MHz Bandwidth Performance gives this cable real headroom above the Cat 6 spec, which means cleaner data transfer for digital snakes, network audio, video, and DMX over IP setups where a dropped packet becomes a problem onstage. The cable also carries Complete Coil™ technology, engineered for consistent wave tolerances that hold accuracy and clarity across the full run.
Compact, Weatherproof, and Rated for the Road
with a 1/4 inch (6.8mm) outer diameter that keeps the cable easy to route and coil, a 1 inch minimum bending radius, and a 25 ft-lb maximum pulling tension for safe handling on load in and strike. The cable is rated IP65 for dust and waterproof protection in its mated condition, and every unit is individually tested for performance and quality before it ships. It complies with Cat 6 specifications under TIA/EIA 568B, ISO/IEC 11801, and EN 50173.
Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.
ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real world feedback directly shapes the products we bring to market. The ProX XC-CAT6-05 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands on expertise and a brand that has never stopped raising the standard for live performance gear.
Key features
- Genuine ProX RJ45 connectors on both ends for direct compatibility with standard network and stagebox gear
- Aluminum foil and braided TC shielding with cotton and PP cross shielding to block outside interference
- 19 x 0.12 Copper OFC inner conductor, 100% pure copper, compliant with UL Code 444 and TIA-568-C.2
- 550MHz bandwidth for strong performance on digital snakes, network audio, video, and DMX over IP
- Complete Coil™ technology for consistent wave tolerances and precise signal accuracy
- 1/4 in (6.8mm) outer diameter, 1 in minimum bending radius, 25 ft-lb maximum pulling tension
- IP65 rated, dust and waterproof in mated condition
- Individually tested and compliant with TIA/EIA 568B, ISO/IEC 11801, and EN 50173
- 5 ft fixed length, also available in 2 ft, 3 ft, 10 ft, 25 ft, 50 ft, 75 ft, 100 ft, 150 ft, 200 ft, and 300 ft
- ProX Limited Warranty
All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.