Waves eMotion LV1 Classic Audio Console, Padded Transport Bag with Shoulder Strap by ALP

Overview

Introducing the ProX XAP-WAVESLV1C Semi-Rigid Bag for Waves eMOTION LV1 Classic, a custom fit console bag built by ALP, a maker recognized around the world for the highest quality and longevity. The LV1 Classic is built to move. It shows up at corporate events, club shows, studio sessions, and fly dates, often all in the same month. A hard case can be heavy and slow for that kind of schedule. A thin soft bag leaves your faders and surface open to every bump. The ProX LV1 BAG fills that gap. It gives you the light weight and quick handling of a soft bag, plus a rigid internal structure that holds its shape and keeps pressure off the console. So you can grab it, load it, and get to the next job knowing your mixer is covered.

Custom Fit for the Waves eMOTION LV1 Classic

The ProX LV1 BAG is made specifically for this console. A generic bag lets the mixer slide around inside, and that constant shifting is what wears on faders, knobs, and the chassis over time. A dedicated fit keeps the LV1 Classic seated and steady from load out to load in, so it arrives the same way it left.

Semi-Rigid Hybrid Construction

This bag blends soft bag mobility with the structure of a hard case. It is light enough for fast setups and quick trips, but firm enough that it won't fold or sag onto your controls. For engineers who move their console often, that balance means less weight to carry without giving up real protection.

1500 Denier Cordura Exterior The outer shell is 1500 denier Cordura, a heavy, water resistant fabric built for rough handling. It stands up to scrapes, drags across concrete, and the constant abuse of vans, trunks, and loading docks. So the bag keeps doing its job long after lighter fabrics would start to fray.

Topstitched Seams with 7/8" Reinforced Border

High strength topstitching and a 7/8" reinforced border help the bag keep its shape under the weight of the console. Seams and edges are where soft bags usually give out first. This extra reinforcement keeps the structure tight trip after trip.

Heavy Duty 10mm Zipper

The main closure is a heavy duty 10mm zipper made for smooth, snag free use. It opens and closes cleanly even when you are rushing through a changeover, and it is built to hold up to years of daily use.

Five Heavy Duty Handles

Five handles are placed around the bag for balanced carrying. You can grab it from different angles, pull it out of a vehicle trunk without a struggle, and share the lift with a second person when needed. That means less strain on you and less chance of an awkward drop.

Two Exterior Pockets

Two outside pockets keep cables, power supplies, and small accessories with the console. Everything you need for the show travels together, so nothing gets left behind at the last venue.

Dual Density Foam with 1/8" Platex Reinforcement Plate

Inside, the ProX LV1 BAG uses 7/8" of dual density foam made from two layers, backed by a 1/8" Platex internal reinforcement plate. The foam absorbs bumps and knocks, while the plate spreads out impact energy and helps prevent the chassis from being crushed. It's a layered approach that gives a soft bag protection you can actually count on.

Eight Reinforced Base Pads

Eight reinforced pads on the bottom keep the bag off the ground. That protects the fabric from wet floors, gravel, and friction every time you set it down, which helps the bag last much longer.

World Recognized ALP Quality

ALP is known worldwide for building transport gear that lasts, and the ProX AHQU5 reflects that standard in its materials and stitching. It is a bag you buy once and keep using for years.

TAA Compliant This ALP bag is compliant with the Trade Agreements Act (TAA), which means it is made in a TAA designated country and qualifies for purchase by US federal agencies, military branches, and government funded programs. For schools, universities, houses of worship, government venues, and contractors bidding on federal work, that makes approval simple. You can spec it straight into a purchase order without country of origin rules holding things up.

Made by ALP in Portugal. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX LV1 BAG is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Custom Fit for Waves eMOTION LV1 Classic made specifically for this console
• Semi-Rigid Hybrid Construction soft bag mobility with hard case structure
• 1500 Denier Cordura Exterior heavy, water resistant, abrasion resistant shell
• 7/8" Reinforced Border with high strength topstitching to hold shape
• Heavy Duty 10mm Zipper smooth, snag free closure
• Five Heavy Duty Handles balanced carrying and easy two person lifting
• Two Exterior Pockets for cables, power supplies, and accessories
• 7/8" Dual Density Foam two layer padding absorbs bumps and knocks
• 1/8" Platex Reinforcement Plate spreads impact and helps prevent chassis compression
• Eight Reinforced Base Pads keep the bag off wet or rough ground
• TAA Compliant Made in a TAA designated country and eligible for US government, military, and federally funded purchasing
• Made by ALP in Portugal distributed in North America by ProX Live Performance Gear
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XAP-WAVESLV1C Semi-Rigid Bag for Waves eMOTION LV1 Classic, a custom fit console bag built by ALP, a maker recognized around the world for the highest quality and longevity. The LV1 Classic is built to move. It shows up at corporate events, club shows, studio sessions, and fly dates, often all in the same month. A hard case can be heavy and slow for that kind of schedule. A thin soft bag leaves your faders and surface open to every bump. The ProX LV1 BAG fills that gap. It gives you the light weight and quick handling of a soft bag, plus a rigid internal structure that holds its shape and keeps pressure off the console. So you can grab it, load it, and get to the next job knowing your mixer is covered.

Custom Fit for the Waves eMOTION LV1 Classic

The ProX LV1 BAG is made specifically for this console. A generic bag lets the mixer slide around inside, and that constant shifting is what wears on faders, knobs, and the chassis over time. A dedicated fit keeps the LV1 Classic seated and steady from load out to load in, so it arrives the same way it left.

Semi-Rigid Hybrid Construction

This bag blends soft bag mobility with the structure of a hard case. It is light enough for fast setups and quick trips, but firm enough that it won't fold or sag onto your controls. For engineers who move their console often, that balance means less weight to carry without giving up real protection.

1500 Denier Cordura Exterior The outer shell is 1500 denier Cordura, a heavy, water resistant fabric built for rough handling. It stands up to scrapes, drags across concrete, and the constant abuse of vans, trunks, and loading docks. So the bag keeps doing its job long after lighter fabrics would start to fray.

Topstitched Seams with 7/8" Reinforced Border

High strength topstitching and a 7/8" reinforced border help the bag keep its shape under the weight of the console. Seams and edges are where soft bags usually give out first. This extra reinforcement keeps the structure tight trip after trip.

Heavy Duty 10mm Zipper

The main closure is a heavy duty 10mm zipper made for smooth, snag free use. It opens and closes cleanly even when you are rushing through a changeover, and it is built to hold up to years of daily use.

Five Heavy Duty Handles

Five handles are placed around the bag for balanced carrying. You can grab it from different angles, pull it out of a vehicle trunk without a struggle, and share the lift with a second person when needed. That means less strain on you and less chance of an awkward drop.

Two Exterior Pockets

Two outside pockets keep cables, power supplies, and small accessories with the console. Everything you need for the show travels together, so nothing gets left behind at the last venue.

Dual Density Foam with 1/8" Platex Reinforcement Plate

Inside, the ProX LV1 BAG uses 7/8" of dual density foam made from two layers, backed by a 1/8" Platex internal reinforcement plate. The foam absorbs bumps and knocks, while the plate spreads out impact energy and helps prevent the chassis from being crushed. It's a layered approach that gives a soft bag protection you can actually count on.

Eight Reinforced Base Pads

Eight reinforced pads on the bottom keep the bag off the ground. That protects the fabric from wet floors, gravel, and friction every time you set it down, which helps the bag last much longer.

World Recognized ALP Quality

ALP is known worldwide for building transport gear that lasts, and the ProX AHQU5 reflects that standard in its materials and stitching. It is a bag you buy once and keep using for years.

TAA Compliant This ALP bag is compliant with the Trade Agreements Act (TAA), which means it is made in a TAA designated country and qualifies for purchase by US federal agencies, military branches, and government funded programs. For schools, universities, houses of worship, government venues, and contractors bidding on federal work, that makes approval simple. You can spec it straight into a purchase order without country of origin rules holding things up.

Made by ALP in Portugal. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX LV1 BAG is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Custom Fit for Waves eMOTION LV1 Classic made specifically for this console
• Semi-Rigid Hybrid Construction soft bag mobility with hard case structure
• 1500 Denier Cordura Exterior heavy, water resistant, abrasion resistant shell
• 7/8" Reinforced Border with high strength topstitching to hold shape
• Heavy Duty 10mm Zipper smooth, snag free closure
• Five Heavy Duty Handles balanced carrying and easy two person lifting
• Two Exterior Pockets for cables, power supplies, and accessories
• 7/8" Dual Density Foam two layer padding absorbs bumps and knocks
• 1/8" Platex Reinforcement Plate spreads impact and helps prevent chassis compression
• Eight Reinforced Base Pads keep the bag off wet or rough ground
• TAA Compliant Made in a TAA designated country and eligible for US government, military, and federally funded purchasing
• Made by ALP in Portugal distributed in North America by ProX Live Performance Gear
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.