GrandMA3 Compact XT Audio Console, Padded Transport Bag with Shoulder Strap by ALP

Overview

Featuring the ProX XAP-GMA3COMXT ALP Padded Bag for MA Lighting grandMA3 compact XT, a custom fit transport bag built to protect one of the most valuable pieces of gear on your show. Your grandMA3 compact XT runs the whole lighting rig, and a cracked screen or a snapped fader before doors open is a problem nobody can fix in time. The ProX GMA3COMXT wraps the console in tough 1500 Denier Cordura, two layers of foam and a rigid Platex panel, so it shows up ready to program. It's lighter and faster to handle than a hard case, which makes it a smart pick for van runs, one day corporate gigs, busy load ins, and any LD who carries the desk from the truck to FOH themselves.

Made by ALP, World Recognized for Quality and Longevity

ALP is known around the world for building bags and cases that hold up to years of real touring. That reputation matters when you're protecting a console at this level. The ProX GMA3COMXT is made to fit one MA Lighting grandMA3 compact XT, so the console sits snug inside without sliding around in transit.

1500 Denier Cordura Exterior The outer shell is made from 1500 Denier Cordura, a heavy fabric picked for its strong resistance to scuffs, tears and daily wear. Truck floors, loading docks and crowded backstage hallways are rough on gear. This fabric takes that abuse so your console doesn't have to.

Topstitched Seams with Reinforced Finishing Border

The bag is built with topstitching and a 0.87" reinforced finishing border around its edges. This is where cheaper bags usually fail first, at the seams and corners. Reinforcing these points helps the ProX GMA3COMXT keep its shape and strength through season after season of loading and unloading.

Heavy Duty 0.39" Zipper

A heavy duty 0.39" zipper gives you smooth, quick access to the console. When you're racing a tight changeover, you need to get the desk out and set up fast, without fighting a stuck or flimsy zipper.

Exterior Accessory Pocket

One exterior pocket keeps the small stuff with the console. It's a handy spot for cables and accessories, so the things you need to power up and get connected travel right alongside the desk.

Silkscreen Logos

Silkscreen logos on the outside make the bag easy to spot in a pile of road gear. Your crew can find the console quickly during load in and load out, which cuts down on searching and mix ups.

Dual Foam and Platex Protection

Inside, the ProX GMA3COMXT uses two layers of 0.43" foam plus a rigid 0.12" Platex hardboard panel. The foam soaks up bumps and shocks, while the Platex adds stiffness that helps resist punctures and pressure. Together they help guard the console's dual screens, faders and controls against the knocks that come with handling and transport.

6 Reinforced Base Pads Six reinforced pads on the base lift the bag off the ground. They add stability when the bag is set down, and they protect the fabric from rough floors and moisture. That means a longer life for the bag and one more layer of protection for what's inside.

World Recognized ALP Quality

ALP is known worldwide for building transport gear that lasts, and the ProX AHQU5 reflects that standard in its materials and stitching. It is a bag you buy once and keep using for years.

TAA Compliant

This ALP bag is compliant with the Trade Agreements Act (TAA), which means it is made in a TAA designated country and qualifies for purchase by US federal agencies, military branches, and government funded programs. For schools, universities, houses of worship, government venues, and contractors bidding on federal work, that makes approval simple. You can spec it straight into a purchase order without country of origin rules holding things up.

Made by ALP. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX GMA3COMXT is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Custom Fit for MA Lighting grandMA3 compact XT Made to hold one console snugly
• Made by ALP World recognized for quality and longevity
• 1500 Denier Cordura Exterior Tough fabric that resists scuffs, tears and wear
• Topstitched Construction Strong seams for long term durability
• 0.87" Reinforced Finishing Border Added strength at edges and corners
• Heavy Duty 0.39" Zipper Smooth, reliable access to the console
• Exterior Pocket Storage for cables and accessories
• Silkscreen Logos Quick identification for your crew
• Dual 0.43" Foam Layers Shock absorbing padding for screens, faders and controls
• 0.12" Platex Hardboard Panel Rigid structure that helps resist punctures and pressure
• 6 Reinforced Base Pads Stability and protection from rough floors and moisture
• TAA Compliant Made in a TAA designated country and eligible for US government, military, and federally funded purchasing
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Featuring the ProX XAP-GMA3COMXT ALP Padded Bag for MA Lighting grandMA3 compact XT, a custom fit transport bag built to protect one of the most valuable pieces of gear on your show. Your grandMA3 compact XT runs the whole lighting rig, and a cracked screen or a snapped fader before doors open is a problem nobody can fix in time. The ProX GMA3COMXT wraps the console in tough 1500 Denier Cordura, two layers of foam and a rigid Platex panel, so it shows up ready to program. It's lighter and faster to handle than a hard case, which makes it a smart pick for van runs, one day corporate gigs, busy load ins, and any LD who carries the desk from the truck to FOH themselves.

Made by ALP, World Recognized for Quality and Longevity

ALP is known around the world for building bags and cases that hold up to years of real touring. That reputation matters when you're protecting a console at this level. The ProX GMA3COMXT is made to fit one MA Lighting grandMA3 compact XT, so the console sits snug inside without sliding around in transit.

1500 Denier Cordura Exterior The outer shell is made from 1500 Denier Cordura, a heavy fabric picked for its strong resistance to scuffs, tears and daily wear. Truck floors, loading docks and crowded backstage hallways are rough on gear. This fabric takes that abuse so your console doesn't have to.

Topstitched Seams with Reinforced Finishing Border

The bag is built with topstitching and a 0.87" reinforced finishing border around its edges. This is where cheaper bags usually fail first, at the seams and corners. Reinforcing these points helps the ProX GMA3COMXT keep its shape and strength through season after season of loading and unloading.

Heavy Duty 0.39" Zipper

A heavy duty 0.39" zipper gives you smooth, quick access to the console. When you're racing a tight changeover, you need to get the desk out and set up fast, without fighting a stuck or flimsy zipper.

Exterior Accessory Pocket

One exterior pocket keeps the small stuff with the console. It's a handy spot for cables and accessories, so the things you need to power up and get connected travel right alongside the desk.

Silkscreen Logos

Silkscreen logos on the outside make the bag easy to spot in a pile of road gear. Your crew can find the console quickly during load in and load out, which cuts down on searching and mix ups.

Dual Foam and Platex Protection

Inside, the ProX GMA3COMXT uses two layers of 0.43" foam plus a rigid 0.12" Platex hardboard panel. The foam soaks up bumps and shocks, while the Platex adds stiffness that helps resist punctures and pressure. Together they help guard the console's dual screens, faders and controls against the knocks that come with handling and transport.

6 Reinforced Base Pads Six reinforced pads on the base lift the bag off the ground. They add stability when the bag is set down, and they protect the fabric from rough floors and moisture. That means a longer life for the bag and one more layer of protection for what's inside.

World Recognized ALP Quality

ALP is known worldwide for building transport gear that lasts, and the ProX AHQU5 reflects that standard in its materials and stitching. It is a bag you buy once and keep using for years.

TAA Compliant

This ALP bag is compliant with the Trade Agreements Act (TAA), which means it is made in a TAA designated country and qualifies for purchase by US federal agencies, military branches, and government funded programs. For schools, universities, houses of worship, government venues, and contractors bidding on federal work, that makes approval simple. You can spec it straight into a purchase order without country of origin rules holding things up.

Made by ALP. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX GMA3COMXT is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Custom Fit for MA Lighting grandMA3 compact XT Made to hold one console snugly
• Made by ALP World recognized for quality and longevity
• 1500 Denier Cordura Exterior Tough fabric that resists scuffs, tears and wear
• Topstitched Construction Strong seams for long term durability
• 0.87" Reinforced Finishing Border Added strength at edges and corners
• Heavy Duty 0.39" Zipper Smooth, reliable access to the console
• Exterior Pocket Storage for cables and accessories
• Silkscreen Logos Quick identification for your crew
• Dual 0.43" Foam Layers Shock absorbing padding for screens, faders and controls
• 0.12" Platex Hardboard Panel Rigid structure that helps resist punctures and pressure
• 6 Reinforced Base Pads Stability and protection from rough floors and moisture
• TAA Compliant Made in a TAA designated country and eligible for US government, military, and federally funded purchasing
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.