Behringer WING Compact Audio Console, Padded Transport Bag with Shoulder Strap by ALP

Overview

Introducing the ProX XAP-BXWINGCOM Padded Bag for Behringer WING Compact, a custom fit transport bag built by ALP, a maker recognized around the world for the highest quality and longevity. Whether you run front of house for touring acts, manage a rental inventory, or mix every weekend for a house of worship, your WING Compact is the heart of the show. It carries delicate faders, a touchscreen, and sensitive electronics, and it takes a beating every time it goes in and out of a van or up a loading dock. The ProX WING BAG gives your console a padded, structured home that is lighter and faster to handle than a hard case, with the toughness to stand up to a real touring schedule. Zip it up, grab a handle or sling it over your shoulder, and move your mixer with confidence from load in to load out.

Custom Fit for the Behringer WING Compact

This bag is made specifically for the Behringer WING Compact. A generic bag leaves room for a console to shift and bounce around inside, and that movement is what wears down faders, knobs, and screens over time. A dedicated fit keeps the mixer seated and steady, so it shows up at the gig the same way it left the shop.

1500 Denier Cordura Exterior The outer shell is made from 1500 denier Cordura, one of the toughest fabrics used in pro gear bags. It stands up to scuffs, drags across concrete, and constant handling night after night. So the bag keeps protecting your console long after cheaper fabrics start to fray and tear.

Topstitched Seams with Reinforced Finishing Border

Every seam is topstitched and finished with a reinforced 7/8" border. Seams and corners are where most soft bags fail first. This added reinforcement helps the bag hold its shape and keeps the stitching from pulling apart under the weight of the console, trip after trip.

Dual Layer Foam with Rigid Platex Panel

Inside the fabric, two layers of foam (each roughly 7/16" thick) work together with a 1/8" Platex hardboard panel. The foam soaks up bumps, drops, and knocks, while the rigid panel adds structure so the bag does not sag or press down on your controls and screen. Here's the thing: you get real impact and puncture protection without hauling around the weight of a hard case.

Heavy Duty 10mm Zipper

The main compartment closes with a heavy duty 10mm zipper. Larger zippers run smoother, resist jamming, and hold up far better to daily use than light duty zips. When you are racing a changeover, a zipper that works every time matters.

Two Exterior Pockets

A pair of exterior pockets keeps your essentials with the console. Stash cables, headphones, and small accessories right on the bag so you are not digging through bins at the venue looking for what you need.

Three Reinforced Handles and Shoulder Strap

Three reinforced handles give you balanced grip points for lifting, including two person carries up stairs or onto a stage. A shoulder strap lets one person carry the console hands free through tight halls and parking lots. That flexibility makes a real difference on long load ins.

Eight Reinforced Base Pads

The bottom of the bag rides on eight reinforced pads. They spread the weight evenly, keep the bag stable when you set it down, and protect the fabric from rough floors, pavement, and moisture. It's a small detail that adds a lot of life to the bag.

World Recognized ALP Quality

ALP is known worldwide for building transport gear that lasts, and the ProX AHQU5 reflects that standard in its materials and stitching. It is a bag you buy once and keep using for years.

TAA Compliant

This ALP bag is compliant with the Trade Agreements Act (TAA), which means it is made in a TAA designated country and qualifies for purchase by US federal agencies, military branches, and government funded programs. For schools, universities, houses of worship, government venues, and contractors bidding on federal work, that makes approval simple. You can spec it straight into a purchase order without country of origin rules holding things up.

Made by ALP in Portugal. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX WING BAG is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Custom Fit made specifically for the Behringer WING Compact digital mixer
• 1500 Denier Cordura Exterior for high abrasion and tear resistance
• Topstitched Seams with a reinforced 7/8" finishing border
• Dual Layer Foam Padding (approx. 7/16" per layer) absorbs shocks and impacts
• 1/8" Rigid Platex Panel adds structure and helps resist punctures
• Heavy Duty 10mm Zipper for smooth, reliable access
• Two Exterior Pockets for cables, headphones, and accessories
• Three Reinforced Handles for balanced one or two person lifting
• Shoulder Strap for hands free carrying
• Eight Reinforced Base Pads for stability and protection from rough floors and moisture
• TAA Compliant Made in a TAA designated country and eligible for US government, military, and federally funded purchasing
• Made by ALP in Portugal, distributed in North America by ProX Live Performance Gear
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XAP-BXWINGCOM Padded Bag for Behringer WING Compact, a custom fit transport bag built by ALP, a maker recognized around the world for the highest quality and longevity. Whether you run front of house for touring acts, manage a rental inventory, or mix every weekend for a house of worship, your WING Compact is the heart of the show. It carries delicate faders, a touchscreen, and sensitive electronics, and it takes a beating every time it goes in and out of a van or up a loading dock. The ProX WING BAG gives your console a padded, structured home that is lighter and faster to handle than a hard case, with the toughness to stand up to a real touring schedule. Zip it up, grab a handle or sling it over your shoulder, and move your mixer with confidence from load in to load out.

Custom Fit for the Behringer WING Compact

This bag is made specifically for the Behringer WING Compact. A generic bag leaves room for a console to shift and bounce around inside, and that movement is what wears down faders, knobs, and screens over time. A dedicated fit keeps the mixer seated and steady, so it shows up at the gig the same way it left the shop.

1500 Denier Cordura Exterior The outer shell is made from 1500 denier Cordura, one of the toughest fabrics used in pro gear bags. It stands up to scuffs, drags across concrete, and constant handling night after night. So the bag keeps protecting your console long after cheaper fabrics start to fray and tear.

Topstitched Seams with Reinforced Finishing Border

Every seam is topstitched and finished with a reinforced 7/8" border. Seams and corners are where most soft bags fail first. This added reinforcement helps the bag hold its shape and keeps the stitching from pulling apart under the weight of the console, trip after trip.

Dual Layer Foam with Rigid Platex Panel

Inside the fabric, two layers of foam (each roughly 7/16" thick) work together with a 1/8" Platex hardboard panel. The foam soaks up bumps, drops, and knocks, while the rigid panel adds structure so the bag does not sag or press down on your controls and screen. Here's the thing: you get real impact and puncture protection without hauling around the weight of a hard case.

Heavy Duty 10mm Zipper

The main compartment closes with a heavy duty 10mm zipper. Larger zippers run smoother, resist jamming, and hold up far better to daily use than light duty zips. When you are racing a changeover, a zipper that works every time matters.

Two Exterior Pockets

A pair of exterior pockets keeps your essentials with the console. Stash cables, headphones, and small accessories right on the bag so you are not digging through bins at the venue looking for what you need.

Three Reinforced Handles and Shoulder Strap

Three reinforced handles give you balanced grip points for lifting, including two person carries up stairs or onto a stage. A shoulder strap lets one person carry the console hands free through tight halls and parking lots. That flexibility makes a real difference on long load ins.

Eight Reinforced Base Pads

The bottom of the bag rides on eight reinforced pads. They spread the weight evenly, keep the bag stable when you set it down, and protect the fabric from rough floors, pavement, and moisture. It's a small detail that adds a lot of life to the bag.

World Recognized ALP Quality

ALP is known worldwide for building transport gear that lasts, and the ProX AHQU5 reflects that standard in its materials and stitching. It is a bag you buy once and keep using for years.

TAA Compliant

This ALP bag is compliant with the Trade Agreements Act (TAA), which means it is made in a TAA designated country and qualifies for purchase by US federal agencies, military branches, and government funded programs. For schools, universities, houses of worship, government venues, and contractors bidding on federal work, that makes approval simple. You can spec it straight into a purchase order without country of origin rules holding things up.

Made by ALP in Portugal. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX WING BAG is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Custom Fit made specifically for the Behringer WING Compact digital mixer
• 1500 Denier Cordura Exterior for high abrasion and tear resistance
• Topstitched Seams with a reinforced 7/8" finishing border
• Dual Layer Foam Padding (approx. 7/16" per layer) absorbs shocks and impacts
• 1/8" Rigid Platex Panel adds structure and helps resist punctures
• Heavy Duty 10mm Zipper for smooth, reliable access
• Two Exterior Pockets for cables, headphones, and accessories
• Three Reinforced Handles for balanced one or two person lifting
• Shoulder Strap for hands free carrying
• Eight Reinforced Base Pads for stability and protection from rough floors and moisture
• TAA Compliant Made in a TAA designated country and eligible for US government, military, and federally funded purchasing
• Made by ALP in Portugal, distributed in North America by ProX Live Performance Gear
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.