Last One, Store Display

Features:

A solid foundation for mixing:

Powerful and musical, Temblor T10 active, front-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness" or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range systems low end so that you can produce your best mix from top to bottom.

Tight, clean, responsive bass:

The Temblor T10s glass-composite low-frequency driver delivers tight and responsive bass, thanks to its lightweight and rigid cone. This design also provides lower distortion than other materials, ensuring that the sub-bass reproduction in your monitoring system is as coherent and clear as your full-range monitors.

A perfect fit with your full-range monitors:

Temblor-series subwoofers make integrating a subwoofer into your monitoring setup easy so you can create the flattest possible response. The Temblor T10 provides a continuously variable lowpass filter (50 Hz to 130 Hz), allowing you to create a seamless crossover transition between your full-range studio monitors and subwoofer for the most accurate listening environment possible.

The central hub of your monitoring setup:

Temblor T10 subwoofers provide the connections and controls necessary to act as the central hub for a basic monitoring setup. A switchable highpass filter on the full-range outputs helps to avoid frequency cancellation and reinforcement in the subwoofers upper range. A polarity invert ensures your system is in phase.The Temblor T10 also features a momentary footswitch (included), making it easy to compare your mix with or without sub-bass frequencies and ensure it will sound good on a wide variety of systems.

Accuracy defined:

When you hear the low-frequency foundation of your mix accurately, you can make more informed decisions and create more translatable mixes. Temblor T10 subwoofers are the natural sub-bass extension for virtually any full-range monitoring system. Hear the Temblor T10 at your favorite PreSonus dealer.

Features: Main components:

• 10-inch, front-firing, glass-composite low-frequency transducer
• Front-firing, bass-reflex acoustic port

Controls and filters:

• Input gain control (-30 dB to +6 dB, continuously variable)
• Continuously variable lowpass filter (50 Hz to 130 Hz)
• Built-in crossover
• Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
• Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
• Polarity invert
• Ground-lift switch

Power and safety:

• 250 watt, Class AB amplification
• Internal damping and heat sink
• Integrated rubber feet for stable placement

Inputs and outputs:

• Left and right, balanced XLR and ¼" TRS and unbalanced RCA main inputs
• Left and right balanced XLR and ¼" TRS outputs
• XLR subwoofer output for connecting a second Temblor T10

Technical Specifications: Inputs:

• 2- Balanced XLR
• 2- Balanced ¼" TRS
• 2- Unbalanced RCA

Outputs:

• 2- Balanced XLR (full range with 80 Hz HPF option)
• 2- Balanced ¼" TRS (full range with 80 Hz HPF option)
• 1- Balanced XLR (Sub Out)

Performance:

• Frequency Response: 20 Hz – 200 Hz
• Low Pass Filter Frequency: 50 – 130 Hz (variable)
• Signal-to-Noise Ratio: >98 dB (A weighted)
• THD: 0.019% @ power <160W
• Amplifier Power: 250W peak, 170W RMS
• Power Consumption: 230W
• Amplifier Type: Class AB
• Peak SPL at 1m: 113 dB
• Woofer: 10" glass-composite, front-firing
• Acoustic Port: Front-firing bass reflex

User Controls:

• Input Gain Range: -30 to +6 dB
• Polarity Switch: 0°¸ or 180°¸
• Low Pass Filter Control: 50 Hz to 130 Hz
• Ground Lift Switch: On/Off
• High Pass Filter Switch: On/Off
• Bypass Footswitch: On/Off

Protection:

• RF interference
• Output-current limiting
• Over-temperature
• Turn-on/off transient
• Subsonic filter
• External mains fuse

Power:

• 100-120V ~50/60 Hz or 220-240V ~50/60 Hz

Cabinet:

• Vinyl-laminated MDF

Physical:

• Width: 12.6" (320 mm)
• Depth: 15.75" (400 mm)
• Height: 15.75" (400 mm)
• Weight: 39.46 Lbs (17.9 kg)