Flight Case for Turntable - Universal with Foam Kit - Black on Black

Overview

Introducing the ProX T-TTBL Universal Turntable Case with Foam Kit in Black on Black. Your turntable is the center of your setup, and the trip to the gig is where it takes the most abuse. A knock in the van, a drop on the loading dock, or a deck sliding around in the trunk can throw off a platter or snap a tonearm before you play a single record. The ProX T-TTBL is built to stop that from happening. It’s an ATA-300 style flight case made for full size 1200 style turntables, with a high-density foam interior that holds your deck snug so it stays put from the house to the booth and back. And the all black finish keeps your rig looking clean and professional on any stage.

Premium Black on Black Design

The ProX T-TTBL comes in the ProX Premium Black on Black design. It’s a sleek, low key look that fits right in on dark stages and in club booths, so your case looks as sharp as the rest of your setup when it’s sitting out during a set.

Signature Honeycomb Digital™ Laminated Plywood

The shell is built from 3/8" laminated plywood finished with Signature Honeycomb Digital™, the hexagon grid surface ProX designed in 2009. The pattern was inspired by New York City manhole covers, which are made to take rough, everyday punishment. Unlike plain laminated plywood, this surface helps hide minor to light scratches, so the case keeps looking good after years of load ins and load outs.

ATA-300 Style Construction

This is a true ATA-300 style flight and road case, made for DJs who move their gear on a regular basis. Whether you’re working weekly residencies, mobile events, or taking your decks between home and the studio, the ProX T-TTBL gives your turntable a hard shell to ride in instead of a soft bag that leaves it exposed.

Aluminum Tongue and Groove Closure

The lid and base meet along aluminum tongue and groove extrusions for an easy locking fit. The lid drops into place and lines up the same way every time, which makes closing the case quick when you’re packing up at the end of a long night.

Steel Ball Corners and Dual Anchor Rivets

ProX heavy steel ball corners guard the spots that take the first hit when a case gets dropped, bumped, or pushed across a floor. Dual anchor rivets hold the hardware tight to the shell, so the parts that take the most stress stay solid over time.

Recessed Twist Butterfly Latches

ProX branded industrial twist butterfly latches sit recessed into the case, so they’re less likely to snag or get knocked open in transit. They’re also padlock ready, so you can lock your turntable up when it’s stored in a shared space or riding with other gear.

Spring Action Recessed Handles

ProX branded spring action handles are recessed into the shell and snap back flush when you let go. You get a solid grip for carrying, and nothing sticking out to catch on doorways or other cases.

Universal High-Density Foam Interior

Inside, high-density foam supports and cushions your turntable on all sides. The case is optimized for the classic Technics SL1200 size and also fits other full size 1200 style decks from Numark, Stanton, Pioneer PLX1000, Audio-Technica, Reloop and more. The interior measures 18" L x 15" W x 4.30" H, plus 3" of depth in the lid.

Industrial Grade Rubber Feet

Four industrial grade rubber feet sit on the bottom of the case to keep it steady when it’s set down and to keep the shell off the ground.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX T-TTBL is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

All ProX cases use CNC technology, during the manufacturing process, to assure that cases are consistently built with strict specifications and tolerances that are required for the high-quality standards that ProX cases have been known for since 1984.

Note: Any pictured device is shown for reference only and not included!

• Premium Black on Black Design for a clean, low key look on stage
• Signature Honeycomb Digital™ Laminated 3/8" Plywood helps hide minor scratches
• ATA-300 Style Flight/Road Case built for regular transport
• Aluminum Tongue and Groove closure for an easy locking fit
• Heavy Steel Ball Corners protect the edges from drops and bumps
• Dual Anchor Rivets hold hardware tight to the shell
• Recessed Twist Butterfly Latches ProX branded, industrial grade and padlock ready
• Spring Action Recessed Handles ProX branded, sit flush when not in use
• High-Density Foam Interior supports and cushions the turntable
• Universal Fit optimized for Technics SL1200 size, also fits Numark, Stanton, Pioneer PLX1000, Audio-Technica, Reloop and other full size 1200 style turntables
• 4 Industrial Grade Rubber Feet keep the case steady
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Full size 1200 Style Turntable, Technics, Numark, Stanton, Pioneer PLX1000, Audio-Technica, RELOOP, etc.

Pioneer Dj PLX-CRSS12 

Compatibility

Full size 1200 Style Turntable, Technics, Numark, Stanton, Pioneer PLX1000, Audio-Technica, RELOOP, etc.

Pioneer Dj PLX-CRSS12 

Product details

Introducing the ProX T-TTBL Universal Turntable Case with Foam Kit in Black on Black. Your turntable is the center of your setup, and the trip to the gig is where it takes the most abuse. A knock in the van, a drop on the loading dock, or a deck sliding around in the trunk can throw off a platter or snap a tonearm before you play a single record. The ProX T-TTBL is built to stop that from happening. It’s an ATA-300 style flight case made for full size 1200 style turntables, with a high-density foam interior that holds your deck snug so it stays put from the house to the booth and back. And the all black finish keeps your rig looking clean and professional on any stage.

Premium Black on Black Design

The ProX T-TTBL comes in the ProX Premium Black on Black design. It’s a sleek, low key look that fits right in on dark stages and in club booths, so your case looks as sharp as the rest of your setup when it’s sitting out during a set.

Signature Honeycomb Digital™ Laminated Plywood

The shell is built from 3/8" laminated plywood finished with Signature Honeycomb Digital™, the hexagon grid surface ProX designed in 2009. The pattern was inspired by New York City manhole covers, which are made to take rough, everyday punishment. Unlike plain laminated plywood, this surface helps hide minor to light scratches, so the case keeps looking good after years of load ins and load outs.

ATA-300 Style Construction

This is a true ATA-300 style flight and road case, made for DJs who move their gear on a regular basis. Whether you’re working weekly residencies, mobile events, or taking your decks between home and the studio, the ProX T-TTBL gives your turntable a hard shell to ride in instead of a soft bag that leaves it exposed.

Aluminum Tongue and Groove Closure

The lid and base meet along aluminum tongue and groove extrusions for an easy locking fit. The lid drops into place and lines up the same way every time, which makes closing the case quick when you’re packing up at the end of a long night.

Steel Ball Corners and Dual Anchor Rivets

ProX heavy steel ball corners guard the spots that take the first hit when a case gets dropped, bumped, or pushed across a floor. Dual anchor rivets hold the hardware tight to the shell, so the parts that take the most stress stay solid over time.

Recessed Twist Butterfly Latches

ProX branded industrial twist butterfly latches sit recessed into the case, so they’re less likely to snag or get knocked open in transit. They’re also padlock ready, so you can lock your turntable up when it’s stored in a shared space or riding with other gear.

Spring Action Recessed Handles

ProX branded spring action handles are recessed into the shell and snap back flush when you let go. You get a solid grip for carrying, and nothing sticking out to catch on doorways or other cases.

Universal High-Density Foam Interior

Inside, high-density foam supports and cushions your turntable on all sides. The case is optimized for the classic Technics SL1200 size and also fits other full size 1200 style decks from Numark, Stanton, Pioneer PLX1000, Audio-Technica, Reloop and more. The interior measures 18" L x 15" W x 4.30" H, plus 3" of depth in the lid.

Industrial Grade Rubber Feet

Four industrial grade rubber feet sit on the bottom of the case to keep it steady when it’s set down and to keep the shell off the ground.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX T-TTBL is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

All ProX cases use CNC technology, during the manufacturing process, to assure that cases are consistently built with strict specifications and tolerances that are required for the high-quality standards that ProX cases have been known for since 1984.

Note: Any pictured device is shown for reference only and not included!

Key features

• Premium Black on Black Design for a clean, low key look on stage
• Signature Honeycomb Digital™ Laminated 3/8" Plywood helps hide minor scratches
• ATA-300 Style Flight/Road Case built for regular transport
• Aluminum Tongue and Groove closure for an easy locking fit
• Heavy Steel Ball Corners protect the edges from drops and bumps
• Dual Anchor Rivets hold hardware tight to the shell
• Recessed Twist Butterfly Latches ProX branded, industrial grade and padlock ready
• Spring Action Recessed Handles ProX branded, sit flush when not in use
• High-Density Foam Interior supports and cushions the turntable
• Universal Fit optimized for Technics SL1200 size, also fits Numark, Stanton, Pioneer PLX1000, Audio-Technica, Reloop and other full size 1200 style turntables
• 4 Industrial Grade Rubber Feet keep the case steady
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.