ProX Set of (3) Universal Lighting Truss System with 4.75 ft - 9.5 ft - 14.25 Triangle Segment Sections

Overview

Introducing the ProX T-LS35C-TRUSS Set of (3) Universal Lighting Triangle Truss Sections. This is the truss that turns a pair of crank stands into a real overhead lighting rig. Three 57" triangle truss sections connect end to end, so you can build a clean span at 4.75 ft, 9.5 ft or 14.25 ft wide and size it to the room you’re working that night. Mobile DJs, wedding and party rental companies, lighting techs and small production crews get a professional look over the dance floor or stage without hauling heavy ground support. And since this is the same truss set that ships in the ProX T-LS35C crank lighting stand system, it’s also the easy way to replace or add a truss set to a rig you already run.

Three Sections, Three Spans

Each set includes three triangle truss sections. Use one section for a tight 4.75 ft span over a DJ booth or photo booth. Connect two for a 9.5 ft span, or run all three for a full 14.25 ft across a wider stage or head table. Your venue changes week to week, and the ProX T-LS35C-TRUSS changes with it.

Triangle Truss Construction

Each section measures 57" long with a 6" overall width and is built from 1.5" diameter tubes. The triangle profile adds rigidity across the span, so the truss holds its shape better than a flat bar once you start hanging fixtures. The slim 6" width keeps the look clean and low profile over the stage.

Load Capacity

The ProX T-LS35C-TRUSS supports up to 200 lbs when the load is evenly distributed across the truss and balanced between both stand lifting points. That gives you room for a solid lighting rig. Keep fixtures spread out instead of stacked at one end or in the center, and always use a safety cable or chain on every mounted fixture.

Made for the ProX T-LS35C System

These sections are designed to mount on the ProX T-LS35C-STAND set of two crank stands with T-bar adapters. Please note that crank stands and T-bars are not included with this truss set. If you’re starting from scratch, the complete ProX T-LS35C system includes both the stands and this truss set in one package.

Easy to Transport and Store

The full set of three sections weighs 33 lbs, and each section breaks down to a 57" length. That makes load in, load out and storage between gigs quick and simple, without a trailer full of heavy ground support.

Get the Complete ProX T-LS35C System Starting from scratch? The ProX T-LS35C Portable Crank Lighting Stand System gives you everything in one package: two crank stands with T-bar adapters plus this same ProX T-LS35C-TRUSS set of three triangle truss sections. It’s the simplest way to get a full overhead lighting rig up and running at 4.75 ft, 9.5 ft or 14.25 ft wide, with no need to source the stands and truss separately. Already own the stands? Then this truss set is all you need to replace or add sections to your rig.

Safety First

Always set your stands on a hard, stable, level surface, on solid ground and clear of overhead obstacles. Stabilize the legs before raising the truss or adding any load. When working outdoors, secure the setup with braces or cables to guard against wind. Install safety chains or cables on every item attached to the truss, keep loads centered and balanced, and never move the stands while loaded or extended. Have a competent person inspect all rigging hardware, stands and truss before each use.

Safety Notes: 

1. Loading on trusses and stands must adhere to rated weights.
2. Lock all safety mechanisms (safety pins, knobs).
3. Loads must be centered and balanced on each lifting unit.
4. Safety chains must be installed on each item attached to the unit.
5. Maintain a safety perimeter with a radius 5-feet greater than the
   maximum height of the stands during lifting and lowering of loads.
6. When transporting, close all sections and lock the lifting carriage.
7. Never attempt to move the stand when it is loaded or in an extended position.

Safety Instructions:

To prevent issues, it's essential to have a competent person inspect all rigging hardware, stands, and equipment before each use, and conduct regular major inspections for signs of wear, abuse, and general adequacy. Perform any manufacturer-recommended preventive maintenance on schedule. Always heed all warnings and usage instructions.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX T-LS35C-TRUSS is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Set of (3) Triangle Truss Sections for building an overhead lighting span
• Configurable Span Widths of 4.75 ft, 9.5 ft or 14.25 ft to fit any venue
• Triangle Truss Profile adds rigidity and stability across the span
• 1.5" Diameter Truss Tubes with a slim 6" overall width
• Up to 200 lbs Load Capacity when evenly distributed and balanced between both stands
• Made for the ProX T-LS35C-STAND crank stands with T-bar adapters (stands sold separately)
• Same Truss Set Included in the ProX T-LS35C System for easy replacement or expansion
• Portable Sections break down for quick load in, load out and storage
• Ideal for DJs, Party Rentals and Live Events including weddings, clubs and corporate shows
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

T-LS35C Lighting Crank Up Lighting Stand System

Compatibility

T-LS35C Lighting Crank Up Lighting Stand System

Product details

Introducing the ProX T-LS35C-TRUSS Set of (3) Universal Lighting Triangle Truss Sections. This is the truss that turns a pair of crank stands into a real overhead lighting rig. Three 57" triangle truss sections connect end to end, so you can build a clean span at 4.75 ft, 9.5 ft or 14.25 ft wide and size it to the room you’re working that night. Mobile DJs, wedding and party rental companies, lighting techs and small production crews get a professional look over the dance floor or stage without hauling heavy ground support. And since this is the same truss set that ships in the ProX T-LS35C crank lighting stand system, it’s also the easy way to replace or add a truss set to a rig you already run.

Three Sections, Three Spans

Each set includes three triangle truss sections. Use one section for a tight 4.75 ft span over a DJ booth or photo booth. Connect two for a 9.5 ft span, or run all three for a full 14.25 ft across a wider stage or head table. Your venue changes week to week, and the ProX T-LS35C-TRUSS changes with it.

Triangle Truss Construction

Each section measures 57" long with a 6" overall width and is built from 1.5" diameter tubes. The triangle profile adds rigidity across the span, so the truss holds its shape better than a flat bar once you start hanging fixtures. The slim 6" width keeps the look clean and low profile over the stage.

Load Capacity

The ProX T-LS35C-TRUSS supports up to 200 lbs when the load is evenly distributed across the truss and balanced between both stand lifting points. That gives you room for a solid lighting rig. Keep fixtures spread out instead of stacked at one end or in the center, and always use a safety cable or chain on every mounted fixture.

Made for the ProX T-LS35C System

These sections are designed to mount on the ProX T-LS35C-STAND set of two crank stands with T-bar adapters. Please note that crank stands and T-bars are not included with this truss set. If you’re starting from scratch, the complete ProX T-LS35C system includes both the stands and this truss set in one package.

Easy to Transport and Store

The full set of three sections weighs 33 lbs, and each section breaks down to a 57" length. That makes load in, load out and storage between gigs quick and simple, without a trailer full of heavy ground support.

Get the Complete ProX T-LS35C System Starting from scratch? The ProX T-LS35C Portable Crank Lighting Stand System gives you everything in one package: two crank stands with T-bar adapters plus this same ProX T-LS35C-TRUSS set of three triangle truss sections. It’s the simplest way to get a full overhead lighting rig up and running at 4.75 ft, 9.5 ft or 14.25 ft wide, with no need to source the stands and truss separately. Already own the stands? Then this truss set is all you need to replace or add sections to your rig.

Safety First

Always set your stands on a hard, stable, level surface, on solid ground and clear of overhead obstacles. Stabilize the legs before raising the truss or adding any load. When working outdoors, secure the setup with braces or cables to guard against wind. Install safety chains or cables on every item attached to the truss, keep loads centered and balanced, and never move the stands while loaded or extended. Have a competent person inspect all rigging hardware, stands and truss before each use.

Safety Notes: 

1. Loading on trusses and stands must adhere to rated weights.
2. Lock all safety mechanisms (safety pins, knobs).
3. Loads must be centered and balanced on each lifting unit.
4. Safety chains must be installed on each item attached to the unit.
5. Maintain a safety perimeter with a radius 5-feet greater than the
   maximum height of the stands during lifting and lowering of loads.
6. When transporting, close all sections and lock the lifting carriage.
7. Never attempt to move the stand when it is loaded or in an extended position.

Safety Instructions:

To prevent issues, it's essential to have a competent person inspect all rigging hardware, stands, and equipment before each use, and conduct regular major inspections for signs of wear, abuse, and general adequacy. Perform any manufacturer-recommended preventive maintenance on schedule. Always heed all warnings and usage instructions.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX T-LS35C-TRUSS is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Set of (3) Triangle Truss Sections for building an overhead lighting span
• Configurable Span Widths of 4.75 ft, 9.5 ft or 14.25 ft to fit any venue
• Triangle Truss Profile adds rigidity and stability across the span
• 1.5" Diameter Truss Tubes with a slim 6" overall width
• Up to 200 lbs Load Capacity when evenly distributed and balanced between both stands
• Made for the ProX T-LS35C-STAND crank stands with T-bar adapters (stands sold separately)
• Same Truss Set Included in the ProX T-LS35C System for easy replacement or expansion
• Portable Sections break down for quick load in, load out and storage
• Ideal for DJs, Party Rentals and Live Events including weddings, clubs and corporate shows
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.