Features:

A solid foundation for mixing:

A subwoofer provides the extra-deep low frequencies you need when mixing on relatively small monitors, especially for music that requires serious low-end punch. Powerful and musical, Temblor T8 active, downward-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness" or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range systems low end so that you can produce your best mix from top to bottom.

Tight, clean, responsive bass:

The Temblor T8s glass-composite low-frequency driver delivers tight and responsive bass, thanks to its lightweight and rigid cone. This design also provides lower distortion than other materials, ensuring that the sub-bass reproduction in your monitoring system is as coherent and clear as your full-range monitors.

A perfect fit with your full-range monitors:

Temblor-series subwoofers make integrating a subwoofer into your monitoring setup easy so you can create the most accurate possible response. The Temblor T8 provides a continuously variable lowpass filter (50 Hz to 130 Hz), allowing you to create a seamless crossover transition between your full-range studio monitors and subwoofer for the most accurate listening environment possible.

The central hub of your monitoring setup:

Temblor subwoofers provide the connections and controls necessary to act as the central hub for a basic monitoring setup. A switchable highpass filter on the full-range outputs helps to avoid frequency cancellation and reinforcement in the subwoofers upper range. A polarity invert ensures your system is in phase.

Accuracy defined:

When you hear the low-frequency foundation of your mix accurately, you can make more informed decisions and create more translatable mixes. Temblor T8 subwoofers are the natural sub-bass extension for virtually any small full-range studio monitoring system, home stereo, or home theater system. Hear the Temblor T8 at your favorite PreSonus dealer.

Features: Main components:

8-inch, downward-firing, glass-composite low-frequency transducer

Round, front-firing, bass-reflex acoustic port

Controls and filters:

Input gain control (-30 dB to +6 dB, continuously variable)

Continuously variable lowpass filter (50 Hz to 130 Hz)

Built-in crossover

Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors

Polarity invert

Power and safety:

200 watt, Class AB amplification

Internal damping and heat sink

Integrated rubber feet for stable placement

Inputs and outputs:

Left and right, balanced ¼" TRS and unbalanced RCA main inputs

Left and right, balanced ¼" TRS and unbalanced RCA outputs

Technical Specifications: Inputs:

2- Balanced ¼" TRS

2- Unbalanced RCA

Outputs:

2- Balanced ¼" TRS (full range with 80 Hz HPF option

2- Unbalanced RCA (full range with 80 Hz HPF option)

Performance:

Frequency Response: 30 Hz – 200 Hz

Low Pass Filter Frequency: 50 – 130 Hz (variable)

Signal-to-Noise Ratio: >98 dB (A weighted)

THD: 0.05%

Amplifier Power: 200W peak, 100W RMS

Power Consumption: 120W

Amplifier Type: Class AB

Peak SPL at 1m: 104 dB

Woofer: 8" glass-composite, downward-firing

Acoustic Port: Rear-firing bass reflex (round)

User Controls:

Input Gain Range: -30 to +6 dB

Polarity Switch: 0°¸ or 180°¸

Low Pass Filter Control: 50 Hz to 130 Hz

High Pass Filter Switch: On/Off

Protection:

RF interference

Output-current limiting

Over-temperature

Turn-on/off transient

Subsonic filter

External mains fuse

Power:

100-120V ~50/60 Hz or 220-240V ~50/60 Hz

Cabinet:

Vinyl-laminated MDF

Physical:

Width: 10.2" (260 mm)

Depth: 12.6" (320 mm)

Height: 11" (280 mm)

Weight: 21.2 Lbs (9.6 kg)

Model:	TEMBLORT8
Manufacturer:	Presonus