Electro Voice EVID-P6.2 6.5" 2-Way Coaxial Pendant Speaker with Horn Loaded Ti Coated Tweeter, Single - White

The Electro Voice EVID-P6.2 loudspeaker system is a complete two-way pendant loudspeaker. The package consists of a bezel assembly, magnetic grille, rear enclosure, 6.5-inch coax two-way loudspeaker and internal line-matching transformer. The loudspeaker features a titanium dome tweeter. The EVID-P6.2 loudspeaker utilizes a 2nd order crossover network with a comprehensive protection circuit to protect the network, woofer and tweeter drivers from excessive power levels. The EVID-P6.2 loudspeaker utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75W, 7.5W, 15W or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines or 8 ohm bypass. Selection is via a convenient switch on the front baffle, easily accessible by removing the magnetic grille.

The perforated grille is finished in semi-gloss black or white powder-coated enamel. The baffle, bezel and rear-enclosure are constructed from UL 94V-0 rated ABS. The connections on the rear provide access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides pass-through to additional speakers. The EVID line of speakers has been designed to work together as a complete system in a wide range of different constructions. The pendant and ceiling loudspeakers provide wide dispersion, high efficiency, high-maximum output, ease of installation and wide range reproduction of music or voice.

Features:

• Full bandwidth overload protection
• Front baffle wattage tap adjustment
• Magnetic grille for easy tap adjustment access
• Indoor and outdoor use
• UL1480A and CSA C22.2 certified for indoor installations and protected outdoor installations

Specifications:

• Rated frequency range: 60 Hz - 20 kHz
• Sensitivity (SPL 1 W/1 m): 87 dB
• Coverage pattern: 115 deg. conical
• Power handling (at 8Ohms): 75 W (with overload protection)
• Rated impedance: 8 Ohms
• Recommended High-Pass frequency: 60 Hz
• Input configuration: 8Ohms; 70V/100V
• 70V/100V power taps: 1.8 (70V only)/3.7/7.5/15/30 W
• LF transducer: 6.5 in (165 mm) high-compliance driver (weatherized cone)
• HF transducer: 1 in (25 mm) titanium dome
• Mounting system: Rear mounted suspension points
• Acoustic design: Ported cabinet, two-way design, internally damped, w/passive crossover
• Approvals: CE, UL 1480A, CSA 22.2
• Cabinet construction: UL94V-0 rated enclosure and baffle
• Grille construction: Powder-coated steel
• Dimensions (DxDia.): 11.9 x 12.2" (30.23 x 30.99cm)
• Weight: 11.65 lbs (5.28kg)