Tradeshow Booth 10.11 W X 9.42 L X 9.20 FT H with T Shape Design in center - 2mm Heavy Duty Truss

Overview

Introducing the ProX XTP-E1099T T Shape Trade Show Booth Truss System, a complete 10.11 ft W x 9.42 ft L x 9.20 ft H aluminum truss structure that gives your brand a clean, professional presence the second attendees turn down your aisle. The center T layout is what sets it apart. Instead of a basic goal post frame, a spur beam runs from the middle of the rear header out to a third tower. That splits your space into two open bays and puts a strong overhead line right through the center of the booth. So you get more places to hang lights, signage, banners, and graphics without crowding the floor. The whole system is built from 2mm wall F34 square truss with conical connectors, so it goes up fast, comes down clean, and packs away for the next show. If you're an exhibitor, retailer, DJ, or event producer who wants a booth that looks custom without starting from a blank page, the ProX E1099T gives you a proven layout with every piece already worked out.

Overhead Header and Center Spur The top of the ProX E1099T is where the design earns its name. Across the back, two 3.28 ft F34 segments meet at a center junction block to form a rear header that spans 9.42 ft. From that same center block, an 8.20 ft segment runs forward to the front tower and completes the T. This gives you continuous overhead truss along the back wall and straight down the middle of the booth, which is exactly where you want lighting, hanging banners, or a framed center display. Always check the ProX truss loading chart before rigging any equipment.

6 Way Junction Blocks Four ProX 6 way square truss junction blocks tie the structure together. Three XT-JB6W-2W blocks sit at the top of the towers, and each one includes 8 half conical couplers. The center XT-JB6W-4W block includes 16 half conical couplers for the busiest connection point in the system, where the header and spur meet. Since each block has six connection faces, you still have open faces available if you want to grow the booth later with more ProX truss and couplers.

F34 Square Truss Construction Every segment is 2mm wall F34 square truss made from EN-AW 6082 T6 aluminum, with 2" main chords and 3/4" bracing in an 11.42" square profile. The welds are TÜV certified, and the XT-SQ segments are made to exact specifications in ProX's own factory. Here's why that matters on the show floor. Aluminum keeps each piece light enough to carry by hand, while the 2mm wall and cross bracing keep the frame rigid and straight, so your booth looks sharp from day one to teardown.

Conical Coupling System The ProX conical coupling system makes the truss genderless, so any end connects to any end. The conical shape lines up the chords precisely and holds rigidity at the stress points, and the parts are harder to damage than flat connectors. Assembly and breakdown only need a small brass or aluminum hammer. The system also mates with most other brands of F34 truss using the same size and connector type, so it can work with truss you may already own.

Vertical Towers Three 8.20 ft F34 segments stand as the towers, two at the rear corners and one at the front center. Together with the junction blocks and base plates, they bring the booth to its full 9.20 ft height. That height lifts your signage and lighting above the crowd so people can spot your booth from across the hall.

Base Plates Three XT-BP12A base plates are included, one under each tower, giving the ProX E1099T a stable footing on the show floor.

Built for Trade Shows and Beyond The ProX E1099T fits trade show booths, exhibitor displays, kiosks, pop up shops, retail spaces, product launches, DJ booths, conferences, concerts, speeches, and church gatherings. Pair it with ProX truss scrim sleeves, clamps, and lighting to turn a bare frame into a finished, branded space that gets noticed.

Custom Designs from ProX Need something a little different? Custom temporary booth, DJ, and production set designs are a specialty of the ProX Engineering Department, with a focus on safety and stability. Our truss and show designers can help you build the exact look you have in mind. Always consult an engineer for complex designs.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX E1099T is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• T Shape Booth Design with a center spur beam that splits the booth into two open bays
• Overhead Rear Header and Center Spur for lighting, banners, and signage right where you need them
• Four 6 Way Junction Blocks including (3) XT-JB6W-2W with 8 half conical couplers each and (1) XT-JB6W-4W with 16 half conical couplers
• 2mm Wall F34 Square Truss with 2" main chords, 3/4" bracing, and an 11.42" square profile
• EN-AW 6082 T6 Aluminum for a strong, lightweight structure
• TÜV Certified Welding for trusted build quality
• Conical Coupling System that is genderless and sets up fast with a small brass or aluminum hammer
• Wide Compatibility with most other brands of F34 conical truss
• Expandable with open junction block faces for adding more ProX truss
• Three Base Plates Included for a stable footprint
• Complete Package with (4) XT-SQ820, (2) XT-SQ328, (3) XT-JB6W-2W, (1) XT-JB6W-4W, and (3) XT-BP12A
• Custom Design Support from the ProX Engineering Department
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Package Contents

• XT-BP12A (3)   
• XT-SQ820 (4)   8.20 Ft. 2.50 M F34 Square Truss Segment | 2 mm Wall
• XT-JB6W-2W (3)   6 Way Square Truss Junction Block - Includes 2 Way 8 Half Conical Couplers
• XT-JB6W-4W (1)   6 Way Square Truss Junction Block - Includes 4 Way 16 Half Conical Couplers
• XT-SQ328 (2)   3.28 Ft - 1.00 M F34 Square Truss Segment | 2 mm Wall

Product details

Introducing the ProX XTP-E1099T T Shape Trade Show Booth Truss System, a complete 10.11 ft W x 9.42 ft L x 9.20 ft H aluminum truss structure that gives your brand a clean, professional presence the second attendees turn down your aisle. The center T layout is what sets it apart. Instead of a basic goal post frame, a spur beam runs from the middle of the rear header out to a third tower. That splits your space into two open bays and puts a strong overhead line right through the center of the booth. So you get more places to hang lights, signage, banners, and graphics without crowding the floor. The whole system is built from 2mm wall F34 square truss with conical connectors, so it goes up fast, comes down clean, and packs away for the next show. If you're an exhibitor, retailer, DJ, or event producer who wants a booth that looks custom without starting from a blank page, the ProX E1099T gives you a proven layout with every piece already worked out.

Overhead Header and Center Spur The top of the ProX E1099T is where the design earns its name. Across the back, two 3.28 ft F34 segments meet at a center junction block to form a rear header that spans 9.42 ft. From that same center block, an 8.20 ft segment runs forward to the front tower and completes the T. This gives you continuous overhead truss along the back wall and straight down the middle of the booth, which is exactly where you want lighting, hanging banners, or a framed center display. Always check the ProX truss loading chart before rigging any equipment.

6 Way Junction Blocks Four ProX 6 way square truss junction blocks tie the structure together. Three XT-JB6W-2W blocks sit at the top of the towers, and each one includes 8 half conical couplers. The center XT-JB6W-4W block includes 16 half conical couplers for the busiest connection point in the system, where the header and spur meet. Since each block has six connection faces, you still have open faces available if you want to grow the booth later with more ProX truss and couplers.

F34 Square Truss Construction Every segment is 2mm wall F34 square truss made from EN-AW 6082 T6 aluminum, with 2" main chords and 3/4" bracing in an 11.42" square profile. The welds are TÜV certified, and the XT-SQ segments are made to exact specifications in ProX's own factory. Here's why that matters on the show floor. Aluminum keeps each piece light enough to carry by hand, while the 2mm wall and cross bracing keep the frame rigid and straight, so your booth looks sharp from day one to teardown.

Conical Coupling System The ProX conical coupling system makes the truss genderless, so any end connects to any end. The conical shape lines up the chords precisely and holds rigidity at the stress points, and the parts are harder to damage than flat connectors. Assembly and breakdown only need a small brass or aluminum hammer. The system also mates with most other brands of F34 truss using the same size and connector type, so it can work with truss you may already own.

Vertical Towers Three 8.20 ft F34 segments stand as the towers, two at the rear corners and one at the front center. Together with the junction blocks and base plates, they bring the booth to its full 9.20 ft height. That height lifts your signage and lighting above the crowd so people can spot your booth from across the hall.

Base Plates Three XT-BP12A base plates are included, one under each tower, giving the ProX E1099T a stable footing on the show floor.

Built for Trade Shows and Beyond The ProX E1099T fits trade show booths, exhibitor displays, kiosks, pop up shops, retail spaces, product launches, DJ booths, conferences, concerts, speeches, and church gatherings. Pair it with ProX truss scrim sleeves, clamps, and lighting to turn a bare frame into a finished, branded space that gets noticed.

Custom Designs from ProX Need something a little different? Custom temporary booth, DJ, and production set designs are a specialty of the ProX Engineering Department, with a focus on safety and stability. Our truss and show designers can help you build the exact look you have in mind. Always consult an engineer for complex designs.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX E1099T is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• T Shape Booth Design with a center spur beam that splits the booth into two open bays
• Overhead Rear Header and Center Spur for lighting, banners, and signage right where you need them
• Four 6 Way Junction Blocks including (3) XT-JB6W-2W with 8 half conical couplers each and (1) XT-JB6W-4W with 16 half conical couplers
• 2mm Wall F34 Square Truss with 2" main chords, 3/4" bracing, and an 11.42" square profile
• EN-AW 6082 T6 Aluminum for a strong, lightweight structure
• TÜV Certified Welding for trusted build quality
• Conical Coupling System that is genderless and sets up fast with a small brass or aluminum hammer
• Wide Compatibility with most other brands of F34 conical truss
• Expandable with open junction block faces for adding more ProX truss
• Three Base Plates Included for a stable footprint
• Complete Package with (4) XT-SQ820, (2) XT-SQ328, (3) XT-JB6W-2W, (1) XT-JB6W-4W, and (3) XT-BP12A
• Custom Design Support from the ProX Engineering Department
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.