Top Loading Lifting tower Capacity 496 lbs Max Height 21.06 ft - Made in Spain by Fantek

Overview

ProX proudly features the ProX XTF-TK6422 Fantek Top Loading Lifting Tower. When the room has no rigging points and your lighting bar or truss span still has to go up high, this is the tower that gets it there. It lifts loads up to 496 lbs to a maximum height of 21 ft with a hand operated winch, so your crew can fly a rig in a ballroom, a tent, a gym or on an outdoor stage without motors or a house grid. Built from steel and made in Spain by Fantek, it gives rental houses, production crews, houses of worship and mobile event pros real production capacity, plus the safety hardware to hold that load in place for the whole show.

496 lbs Lifting Capacity at 21 ft The ProX TK6422 is rated for vertical loads from 55.12 lbs up to 496.04 lbs. That range covers a loaded lighting bar or a truss span with fixtures and cabling. With 21 ft of maximum height, your rig clears the crowd and the sightlines in large rooms and outdoor setups.

Top Loading Design The load mounts at the top of the mast and rises with it. This keeps the weight centered over the tower as it goes up. Pair it with the ProX XTF-ATCMOB Universal Truss Bracket to seat truss on top of the tower.

Five Section Telescoping Steel Mast Five extendable steel profiles nest inside each other and rise in sequence. Steel construction gives the mast the stiffness it needs at full height under a working load. When the show is over, the sections nest back down to a folded height of 6.03 ft.

Automatic Steel Locking Pins Self locking steel safety pins fix each tower section at the working height. They engage on their own as the mast rises, so the load is held mechanically and is not hanging on the cable alone. This is the feature that lets you walk away from a raised rig with confidence.

Hand Winch Rated at 1,984 lbs A manually operated winch drives the whole system through a high strength steel cable with a 0.24" diameter. The winch rating is four times the maximum load of the tower, so it is never working near its limit. No power is needed, which matters at outdoor sites and venues where outlets are far from the stage.

Leveling Legs with Rubber Feet The legs fold out to form the base and each one can be leveled. That lets you set the tower plumb on uneven ground like grass, asphalt or an old venue floor. Non-slip rubber feet grip the surface and protect finished floors.

Folds Down for Transport With the legs folded, the base measures about 18.1" x 18.1" and the tower stands 6.03 ft tall. It weighs 209.44 lbs, so plan for two people or a cart when loading. The compact folded footprint makes it easy to line up several towers in a truck or a warehouse bay.

Safety Certified Per the manufacturer, the tower carries CE, DGUV, BGV C1 and BGG 912 certifications. These are the standards that venues, insurers and safety officers ask about when gear goes over people's heads.

Made in Spain by Fantek Fantek builds lifting towers in Spain for professional event production. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX TK6422 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• 496 lbs Maximum Load Lifts loaded lighting bars and truss spans
• 21 ft Maximum Height Gets your rig above the crowd and sightlines
• Top Loading Design Load mounts on top of the mast and stays centered
• Truss Bracket Compatible Works with the ProX XTF-ATCMOB Universal Truss Bracket
• Five Section Steel Mast Telescoping steel profiles for stiffness at full height
• Automatic Steel Locking Pins Self locking safety pins hold each section at working height
• 1,984 lbs Rated Hand Winch Manual operation, no power required
• High Strength Steel Cable 0.24" diameter cable drives the lift
• Leveling Leg System Sets the tower plumb on uneven ground
• Non-Slip Rubber Feet Grip the surface and protect floors
• 55.12 lbs Minimum Load Rated working range starts here
• Folds for Transport Legs fold in and the mast nests down for storage
• CE, DGUV, BGV C1 and BGG 912 Certified Per the manufacturer
• Made in Spain by Fantek Distributed in North America by ProX Live Performance Gear

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

ProX proudly features the ProX XTF-TK6422 Fantek Top Loading Lifting Tower. When the room has no rigging points and your lighting bar or truss span still has to go up high, this is the tower that gets it there. It lifts loads up to 496 lbs to a maximum height of 21 ft with a hand operated winch, so your crew can fly a rig in a ballroom, a tent, a gym or on an outdoor stage without motors or a house grid. Built from steel and made in Spain by Fantek, it gives rental houses, production crews, houses of worship and mobile event pros real production capacity, plus the safety hardware to hold that load in place for the whole show.

496 lbs Lifting Capacity at 21 ft The ProX TK6422 is rated for vertical loads from 55.12 lbs up to 496.04 lbs. That range covers a loaded lighting bar or a truss span with fixtures and cabling. With 21 ft of maximum height, your rig clears the crowd and the sightlines in large rooms and outdoor setups.

Top Loading Design The load mounts at the top of the mast and rises with it. This keeps the weight centered over the tower as it goes up. Pair it with the ProX XTF-ATCMOB Universal Truss Bracket to seat truss on top of the tower.

Five Section Telescoping Steel Mast Five extendable steel profiles nest inside each other and rise in sequence. Steel construction gives the mast the stiffness it needs at full height under a working load. When the show is over, the sections nest back down to a folded height of 6.03 ft.

Automatic Steel Locking Pins Self locking steel safety pins fix each tower section at the working height. They engage on their own as the mast rises, so the load is held mechanically and is not hanging on the cable alone. This is the feature that lets you walk away from a raised rig with confidence.

Hand Winch Rated at 1,984 lbs A manually operated winch drives the whole system through a high strength steel cable with a 0.24" diameter. The winch rating is four times the maximum load of the tower, so it is never working near its limit. No power is needed, which matters at outdoor sites and venues where outlets are far from the stage.

Leveling Legs with Rubber Feet The legs fold out to form the base and each one can be leveled. That lets you set the tower plumb on uneven ground like grass, asphalt or an old venue floor. Non-slip rubber feet grip the surface and protect finished floors.

Folds Down for Transport With the legs folded, the base measures about 18.1" x 18.1" and the tower stands 6.03 ft tall. It weighs 209.44 lbs, so plan for two people or a cart when loading. The compact folded footprint makes it easy to line up several towers in a truck or a warehouse bay.

Safety Certified Per the manufacturer, the tower carries CE, DGUV, BGV C1 and BGG 912 certifications. These are the standards that venues, insurers and safety officers ask about when gear goes over people's heads.

Made in Spain by Fantek Fantek builds lifting towers in Spain for professional event production. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX TK6422 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• 496 lbs Maximum Load Lifts loaded lighting bars and truss spans
• 21 ft Maximum Height Gets your rig above the crowd and sightlines
• Top Loading Design Load mounts on top of the mast and stays centered
• Truss Bracket Compatible Works with the ProX XTF-ATCMOB Universal Truss Bracket
• Five Section Steel Mast Telescoping steel profiles for stiffness at full height
• Automatic Steel Locking Pins Self locking safety pins hold each section at working height
• 1,984 lbs Rated Hand Winch Manual operation, no power required
• High Strength Steel Cable 0.24" diameter cable drives the lift
• Leveling Leg System Sets the tower plumb on uneven ground
• Non-Slip Rubber Feet Grip the surface and protect floors
• 55.12 lbs Minimum Load Rated working range starts here
• Folds for Transport Legs fold in and the mast nests down for storage
• CE, DGUV, BGV C1 and BGG 912 Certified Per the manufacturer
• Made in Spain by Fantek Distributed in North America by ProX Live Performance Gear

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.