Top Loading Lifting tower - Capacity 330 lbs Max Height 17.15 ft - Made in Spain by Fantek
Top Loading Lifting tower - Capacity 330 lbs Max Height 17.15 ft - Made in Spain by Fantek
Overview
Featuring the ProX XTF-T103D Fantek Top Loading Lifting Tower. When a truss span or lighting rig has to sit higher than a standard crank stand can reach, this is the tower that gets it there. It lifts up to 330 lbs to a maximum height of 17.15 ft, raised by a manually operated winch and held in place by automatic steel locking pins. Made in Spain by Fantek and built for intense use, it gives production crews, rental houses, mobile DJs, houses of worship and venue installers a steel lifting tower they can count on show after show, and it folds down to 5.83 ft when the job is done.
Top Loading Design The load mounts at the top of the mast, so the tower is designed to lift vertical loads straight up from the center of the base. That keeps the setup simple. Mount the load at the top, crank it to height and lock it in.
Four Section Steel Mast The mast is built from four extensible steel profiles that telescope from a 5.91 ft minimum height up to 17.15 ft. Steel construction is what lets a tower with this much reach carry a 330 lb load, and it is the reason this tower holds up to the daily load in and load out of rental and touring work.
Steel Cable and Pulley Lift System The mast sections are lifted by a high-strength steel cable running on ribbed driven pulleys with SELOIL bearings. This is the working heart of the tower, and it is built to keep the lift consistent through repeated use.
Automatic Steel Locking Pins As the tower goes up, automatic steel locking pins fix each section at the height you want. You set your trim height and the pins hold it there, so the tower stays put for the length of the event.
Manual Winch Operation The entire system is operated by a manual winch rated at 1102.31 lbs. No power is needed at the tower, which makes it just as useful in a field or a parking lot as it is inside a venue.
Leveling Legs with Non-Slip Rubber Feet The legs are fitted with non-slip rubber feet and levelers that allow the tower to be set up on uneven terrain. Outdoor events rarely give you a flat floor, and the levelers let you correct for it at the base before any weight goes up.
Specifications The ProX T103D reaches a maximum height of 17.15 ft and has a minimum height of 5.91 ft, with a folded height of 5.83 ft. It handles a maximum load of 330.69 lbs with a minimum load of 55.12 lbs. The mast is built in 4 sections, and the winch is rated at 1102.31 lbs.
Recommended Accessory Pair the ProX T103D with the ProX XTF-ATCMOB Fantek Universal Truss Bracket Adjustable T-Adapter, made for all Fantek top load center lifting towers, to mount truss at the top of the mast. Sold separately.
Made in Spain by Fantek Every ProX T103D is manufactured in Spain by Fantek.
Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.
ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX T103D is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.
- 330 lb Maximum Load Lifts up to 330.69 lbs, with a 55.12 lb minimum load
- 17.15 ft Maximum Height Telescopes from a 5.91 ft minimum height
- Top Loading Design Load mounts at the top of the mast for vertical lifting
- Four Section Steel Mast Four extensible steel profiles
- High-Strength Steel Cable Runs on ribbed driven pulleys with SELOIL bearings
- Automatic Steel Locking Pins Fix the tower at the desired height
- Manual Winch Rated at 1102.31 lbs, no power required
- Leveling Legs Levelers allow setup on uneven terrain
- Non-Slip Rubber Feet Keep the base planted
- 5.83 ft Folded Height Folds down for transport and storage
- Accessory Compatible Works with the XTF-ATCMOB Fantek Adjustable T-Adapter for truss, sold separately
- Made in Spain by Fantek
- ProX Limited Warranty
All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Product details
Featuring the ProX XTF-T103D Fantek Top Loading Lifting Tower. When a truss span or lighting rig has to sit higher than a standard crank stand can reach, this is the tower that gets it there. It lifts up to 330 lbs to a maximum height of 17.15 ft, raised by a manually operated winch and held in place by automatic steel locking pins. Made in Spain by Fantek and built for intense use, it gives production crews, rental houses, mobile DJs, houses of worship and venue installers a steel lifting tower they can count on show after show, and it folds down to 5.83 ft when the job is done.
Top Loading Design The load mounts at the top of the mast, so the tower is designed to lift vertical loads straight up from the center of the base. That keeps the setup simple. Mount the load at the top, crank it to height and lock it in.
Four Section Steel Mast The mast is built from four extensible steel profiles that telescope from a 5.91 ft minimum height up to 17.15 ft. Steel construction is what lets a tower with this much reach carry a 330 lb load, and it is the reason this tower holds up to the daily load in and load out of rental and touring work.
Steel Cable and Pulley Lift System The mast sections are lifted by a high-strength steel cable running on ribbed driven pulleys with SELOIL bearings. This is the working heart of the tower, and it is built to keep the lift consistent through repeated use.
Automatic Steel Locking Pins As the tower goes up, automatic steel locking pins fix each section at the height you want. You set your trim height and the pins hold it there, so the tower stays put for the length of the event.
Manual Winch Operation The entire system is operated by a manual winch rated at 1102.31 lbs. No power is needed at the tower, which makes it just as useful in a field or a parking lot as it is inside a venue.
Leveling Legs with Non-Slip Rubber Feet The legs are fitted with non-slip rubber feet and levelers that allow the tower to be set up on uneven terrain. Outdoor events rarely give you a flat floor, and the levelers let you correct for it at the base before any weight goes up.
Specifications The ProX T103D reaches a maximum height of 17.15 ft and has a minimum height of 5.91 ft, with a folded height of 5.83 ft. It handles a maximum load of 330.69 lbs with a minimum load of 55.12 lbs. The mast is built in 4 sections, and the winch is rated at 1102.31 lbs.
Recommended Accessory Pair the ProX T103D with the ProX XTF-ATCMOB Fantek Universal Truss Bracket Adjustable T-Adapter, made for all Fantek top load center lifting towers, to mount truss at the top of the mast. Sold separately.
Made in Spain by Fantek Every ProX T103D is manufactured in Spain by Fantek.
Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.
ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX T103D is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.
Key features
- 330 lb Maximum Load Lifts up to 330.69 lbs, with a 55.12 lb minimum load
- 17.15 ft Maximum Height Telescopes from a 5.91 ft minimum height
- Top Loading Design Load mounts at the top of the mast for vertical lifting
- Four Section Steel Mast Four extensible steel profiles
- High-Strength Steel Cable Runs on ribbed driven pulleys with SELOIL bearings
- Automatic Steel Locking Pins Fix the tower at the desired height
- Manual Winch Rated at 1102.31 lbs, no power required
- Leveling Legs Levelers allow setup on uneven terrain
- Non-Slip Rubber Feet Keep the base planted
- 5.83 ft Folded Height Folds down for transport and storage
- Accessory Compatible Works with the XTF-ATCMOB Fantek Adjustable T-Adapter for truss, sold separately
- Made in Spain by Fantek
- ProX Limited Warranty
All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.