6PCS Portable Truss Top or Floor Stand for F34 W-2 Inch - 50mm Mounting Tube

Overview

Featuring the ProX XT-FS34 Portable Truss Top or Floor Stand with 2" (50mm) Mounting Tube. Strapping a light or monitor to a base that sits on top of a vertical truss tower is one of those setups that makes every production crew nervous. One bump, one loose strap, and that gear can come down in the middle of a show. The ProX FS34 fixes that problem by giving you a solid steel mounting point that locks right onto the top of your F34 truss, so lights and monitors with 2" clamp mounting sit on a fixed tube instead of a strapped base. No top plate is needed, setup goes faster, and the result is far more secure and safer for your crew, your performers and your audience.

Mounts Directly to F34 Truss Tops The ProX FS34 connects to the top of F34 truss using its half couplers and the included connecting hardware. That means you can cap off a truss tower with a mounting point without adding a separate truss base or top plate to the build. Fewer parts at the top of a tower means less to carry, less to assemble at load in, and a cleaner look from the crowd.

2" (50mm) Mounting Tube The mounting tube is sized at 2" (50mm) to accept lighting fixtures and monitors that use 2" clamp mounting. Clamp your fixture on, tighten it down and it stays put. It is a simple, proven way to get gear up high on a truss tower without improvising.

Doubles as a Floor Stand Need a mounting point on the ground instead of up on a tower? The ProX FS34 can be used on a floor or ground surface by removing the half couplers, or you can even leave them in place. That gives you a stable base for a floor level lighting position, like uplighting a wall or the front of a stage, using the same piece of gear you already own.

All Steel Construction with TÜV Certified Welding The ProX FS34 is built from all steel and manufactured to exacting specifications in our own factory. The welding is TÜV certified. TÜV Rheinland® is a 3rd party certification body and a Nationally Recognized Testing Laboratory (NRTL) that provides inspections, testing, certification and training with the goals of reliability, safety and high quality. When a stand is holding gear above people’s heads, that kind of independent check on the welds matters.

Black Powder Coated Finish A black powder coated finish gives the ProX FS34 a clean, low profile look that blends into black truss and dark stage environments, so the audience sees the show and not the hardware.

Compact and Portable At 9"H x 11.42"W x 11.42"L and just 6 lbs, the ProX FS34 is easy to toss in with your truss hardware and carry from gig to gig. It takes up very little space in the truck and sets up in minutes.

Complete Your F34 Rig Pair the ProX FS34 with ProX F34 truss segments like the XT-SQ492BLK 4.92 ft and XT-SQ656BLK 6.56 ft black powder coated segments for a matching finish from base to top. ProX also offers a full lineup of clamps, base plates, spacers, corners and truss accessories to finish out anything from a simple show booth to a full rigging project.

Complete Your Truss Setup ProX also manufactures a full selection of trussing accessories to finish out your rig, including clamps, hanging and lifting points, spacers, box corners, mounting poles, base/top plates and much more. Whether you are building a full rigging project or a simple show booth, you can find everything you need to complete your design with the ProX FS34.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX FS34 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Mounts Directly to F34 Truss Tops with half couplers, no truss base or top plate needed
• Safer Than Strapping gear to a base on top of vertical truss
• 2" (50mm) Mounting Tube for lights and monitors with 2" clamp mounting
• Doubles as a Floor Stand with half couplers removed or left in place
• All Steel Construction
• TÜV Certified Welding
• Black Powder Coated Finish blends into black truss and dark stages
• Includes Connecting Hardware
• Manufactured in Our Own Factory to exacting specifications
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

TÜV Rheinland® is a 3rd Party Certification Body and a Nationally Recognized Testing Laboratory (NRTL).  TÜV provides inspections, testing, certification & training, with the ultimate objectives of reliability, safety & high quality.

Top Tube Ends of F34 Conical Truss

Compatibility

Top Tube Ends of F34 Conical Truss

Product details

Featuring the ProX XT-FS34 Portable Truss Top or Floor Stand with 2" (50mm) Mounting Tube. Strapping a light or monitor to a base that sits on top of a vertical truss tower is one of those setups that makes every production crew nervous. One bump, one loose strap, and that gear can come down in the middle of a show. The ProX FS34 fixes that problem by giving you a solid steel mounting point that locks right onto the top of your F34 truss, so lights and monitors with 2" clamp mounting sit on a fixed tube instead of a strapped base. No top plate is needed, setup goes faster, and the result is far more secure and safer for your crew, your performers and your audience.

Mounts Directly to F34 Truss Tops The ProX FS34 connects to the top of F34 truss using its half couplers and the included connecting hardware. That means you can cap off a truss tower with a mounting point without adding a separate truss base or top plate to the build. Fewer parts at the top of a tower means less to carry, less to assemble at load in, and a cleaner look from the crowd.

2" (50mm) Mounting Tube The mounting tube is sized at 2" (50mm) to accept lighting fixtures and monitors that use 2" clamp mounting. Clamp your fixture on, tighten it down and it stays put. It is a simple, proven way to get gear up high on a truss tower without improvising.

Doubles as a Floor Stand Need a mounting point on the ground instead of up on a tower? The ProX FS34 can be used on a floor or ground surface by removing the half couplers, or you can even leave them in place. That gives you a stable base for a floor level lighting position, like uplighting a wall or the front of a stage, using the same piece of gear you already own.

All Steel Construction with TÜV Certified Welding The ProX FS34 is built from all steel and manufactured to exacting specifications in our own factory. The welding is TÜV certified. TÜV Rheinland® is a 3rd party certification body and a Nationally Recognized Testing Laboratory (NRTL) that provides inspections, testing, certification and training with the goals of reliability, safety and high quality. When a stand is holding gear above people’s heads, that kind of independent check on the welds matters.

Black Powder Coated Finish A black powder coated finish gives the ProX FS34 a clean, low profile look that blends into black truss and dark stage environments, so the audience sees the show and not the hardware.

Compact and Portable At 9"H x 11.42"W x 11.42"L and just 6 lbs, the ProX FS34 is easy to toss in with your truss hardware and carry from gig to gig. It takes up very little space in the truck and sets up in minutes.

Complete Your F34 Rig Pair the ProX FS34 with ProX F34 truss segments like the XT-SQ492BLK 4.92 ft and XT-SQ656BLK 6.56 ft black powder coated segments for a matching finish from base to top. ProX also offers a full lineup of clamps, base plates, spacers, corners and truss accessories to finish out anything from a simple show booth to a full rigging project.

Complete Your Truss Setup ProX also manufactures a full selection of trussing accessories to finish out your rig, including clamps, hanging and lifting points, spacers, box corners, mounting poles, base/top plates and much more. Whether you are building a full rigging project or a simple show booth, you can find everything you need to complete your design with the ProX FS34.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX FS34 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Mounts Directly to F34 Truss Tops with half couplers, no truss base or top plate needed
• Safer Than Strapping gear to a base on top of vertical truss
• 2" (50mm) Mounting Tube for lights and monitors with 2" clamp mounting
• Doubles as a Floor Stand with half couplers removed or left in place
• All Steel Construction
• TÜV Certified Welding
• Black Powder Coated Finish blends into black truss and dark stages
• Includes Connecting Hardware
• Manufactured in Our Own Factory to exacting specifications
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

TÜV Rheinland® is a 3rd Party Certification Body and a Nationally Recognized Testing Laboratory (NRTL).  TÜV provides inspections, testing, certification & training, with the ultimate objectives of reliability, safety & high quality.