8x8" Steel Truss Bolt Plate, 1.5" Schedule 40 Flange with Handle

Overview

Featuring the ProX XT-BTBP8SC40 Steel Bolt Plate, the base connection point built for crews who need their truss towers anchored right the first time. When a rigging point has to carry real weight over a full show run, there's no room for a plate that flexes, cracks, or doesn't line up. This bolt plate was built to solve that problem, giving techs a solid, repeatable connection between BoltX truss sections and the ground, deck, or base plate below.

Schedule 40 Steel Construction The plate is built from steel to Schedule 40 specifications, giving it the wall thickness and rigidity needed to handle the compression and torque loads that come with vertical truss towers. This isn't a stamped or lightweight fitting, it's designed to stand up to repeated load-in and load-out cycles without deforming.

8x8" Footprint The plate measures 8x8 inches, giving it a wide, stable base for distributing load evenly at the connection point rather than concentrating stress on a single small contact area.

1.5" Schedule 40 Flange At the center of the plate sits a 1.5" Schedule 40 flange, machined to fit directly onto ProX BoltX truss sections. This flange is what allows the plate to seat and lock into the truss coupling system, giving riggers a clean, secure transition from truss to base.

Integrated Handle A raised handle sits alongside the flange, giving techs a real grip point to lift, turn, and position the plate during setup rather than fighting for finger holds on a flat steel surface. It's a small detail that speeds up load-in when you're setting multiple bases across a stage.

Four-Point Mounting Four mounting holes are positioned at the corners of the plate, allowing it to be securely bolted down to a stage deck, base plate, or ground support, keeping the tower locked in place throughout the show.

ProX Branding The plate carries the ProX logo stamped directly into the steel, marking it as genuine ProX hardware at a glance, useful for techs keeping gear organized across a busy truss build where hardware from multiple vendors can end up mixed together.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX BTBP8SC40 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Schedule 40 Steel Construction – Built to Schedule 40 specifications for the rigidity needed to handle vertical load and repeated rigging cycles
• 8x8" Base Plate – Wide, stable footprint that distributes load evenly at the connection point
• 1.5" Schedule 40 Flange – Machined to seat directly onto ProX BoltX truss sections for a secure, locking connection
• Integrated Handle – Raised grip point for easier lifting and positioning during setup
• Four-Point Mounting – Four corner mounting holes allow the plate to be bolted down to a deck, base plate, or ground support
• ProX Branding – Logo stamped into the steel for easy identification as genuine ProX hardware
• Single Unit – Sold individually, ready to integrate into any BoltX truss tower setup
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Featuring the ProX XT-BTBP8SC40 Steel Bolt Plate, the base connection point built for crews who need their truss towers anchored right the first time. When a rigging point has to carry real weight over a full show run, there's no room for a plate that flexes, cracks, or doesn't line up. This bolt plate was built to solve that problem, giving techs a solid, repeatable connection between BoltX truss sections and the ground, deck, or base plate below.

Schedule 40 Steel Construction The plate is built from steel to Schedule 40 specifications, giving it the wall thickness and rigidity needed to handle the compression and torque loads that come with vertical truss towers. This isn't a stamped or lightweight fitting, it's designed to stand up to repeated load-in and load-out cycles without deforming.

8x8" Footprint The plate measures 8x8 inches, giving it a wide, stable base for distributing load evenly at the connection point rather than concentrating stress on a single small contact area.

1.5" Schedule 40 Flange At the center of the plate sits a 1.5" Schedule 40 flange, machined to fit directly onto ProX BoltX truss sections. This flange is what allows the plate to seat and lock into the truss coupling system, giving riggers a clean, secure transition from truss to base.

Integrated Handle A raised handle sits alongside the flange, giving techs a real grip point to lift, turn, and position the plate during setup rather than fighting for finger holds on a flat steel surface. It's a small detail that speeds up load-in when you're setting multiple bases across a stage.

Four-Point Mounting Four mounting holes are positioned at the corners of the plate, allowing it to be securely bolted down to a stage deck, base plate, or ground support, keeping the tower locked in place throughout the show.

ProX Branding The plate carries the ProX logo stamped directly into the steel, marking it as genuine ProX hardware at a glance, useful for techs keeping gear organized across a busy truss build where hardware from multiple vendors can end up mixed together.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX BTBP8SC40 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Schedule 40 Steel Construction – Built to Schedule 40 specifications for the rigidity needed to handle vertical load and repeated rigging cycles
• 8x8" Base Plate – Wide, stable footprint that distributes load evenly at the connection point
• 1.5" Schedule 40 Flange – Machined to seat directly onto ProX BoltX truss sections for a secure, locking connection
• Integrated Handle – Raised grip point for easier lifting and positioning during setup
• Four-Point Mounting – Four corner mounting holes allow the plate to be bolted down to a deck, base plate, or ground support
• ProX Branding – Logo stamped into the steel for easy identification as genuine ProX hardware
• Single Unit – Sold individually, ready to integrate into any BoltX truss tower setup
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.