36'' Steel 10mm Truss Base Plate for F34 F32 F31 Conical Square Truss with Connectors - Black Finish

Overview

Introducing the ProX XT-BP3636S 36" Steel 10mm Truss Base Plate with Connectors in Black Finish. Some builds need more than a standard base. Tall totems, heavy displays and towers set up in busy rooms all put real demands on what sits at the floor. The ProX BP3636S answers that with a wide 36" x 36" footprint and a full 105 lbs of solid steel under your F34, F32 or F31 conical square truss. It gives your tower a broad, heavy foundation that stays planted, so you can focus on the show instead of watching the base. The connecting hardware set is included, so the plate is ready to mount the moment it comes out of the box.

Conical Connection Hardware Included The ProX BP3636S ships with the connecting hardware set you need to attach your truss to the plate. You can set the base, mount your first conical segment and keep building without stopping to track down extra parts.

Fits F34, F32 and F31 Conical Square Truss This plate is made for ProX F34, F32 and F31 conical truss. ProX builds to industry standard dimensions that are compatible with most other truss manufacturers, so the ProX BP3636S can work with truss you already have in your inventory.

10mm All Steel Plate The ProX BP3636S is cut from 10mm steel and made completely from steel material. It is heavier than other base plates, and that weight is the whole point. Mass at the bottom of a tower lowers the center of gravity, which helps the build hold steady when it gets bumped by crew, guests or rolling carts during load in and through the night.

Wide 36" Square Footprint At 36" x 36", the ProX BP3636S spreads its support out in every direction. That broad stance is a strong match for taller totems and builds that carry more weight up top, where a smaller plate may not give you the margin you want.

Black Finish The black finish keeps the base low key on dark stages and against pipe and drape, so attention stays on the performer, the display or the product being shown. It also pairs with ProX black finish F34 truss for a clean, matching look from floor to top.

Built for Totems and Flat Screen Displays Since it is heavier than other base plates, the ProX BP3636S is ideal for securing flat screen TVs on totem truss. A solid base helps keep the display from falling over and causing injury, which is exactly the peace of mind you want at weddings, corporate events and trade shows where people move close to the build.

Handle With Care The plate has sharp straight edges and weighs 105 lbs. Wear work gloves, plan on two people to lift and place it, and keep it away from soft cases and cables when it is loaded for transport.

Complete Your Setup Pair the ProX BP3636S with ProX F34 conical truss segments in black finish for a matching tower. For safe storage and travel, add a ProX base plate bag or a ProX stage truss and base plate case to keep the plate and the rest of your gear protected.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX BP3636S is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Includes Connecting Hardware Set for mounting conical truss to the plate
• Fits F34, F32 and F31 Conical Square Truss from ProX
• Compatible With Other Brands built to industry standard dimensions used by most truss manufacturers
• 10mm Plate Thickness for a solid, heavy base
• All Steel Construction heavier than other base plates for a more stable tower
• Wide 36" Square Footprint spreads support in every direction
• Ideal for Totem Truss including flat screen TV display setups
• Black Finish blends into stages and event decor and matches ProX black truss
• Caution: Sharp Straight Edges wear gloves when handling
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Most F34, F32, F31 Truss Brands with Conical Connections

Compatibility

Most F34, F32, F31 Truss Brands with Conical Connections

Product details

Introducing the ProX XT-BP3636S 36" Steel 10mm Truss Base Plate with Connectors in Black Finish. Some builds need more than a standard base. Tall totems, heavy displays and towers set up in busy rooms all put real demands on what sits at the floor. The ProX BP3636S answers that with a wide 36" x 36" footprint and a full 105 lbs of solid steel under your F34, F32 or F31 conical square truss. It gives your tower a broad, heavy foundation that stays planted, so you can focus on the show instead of watching the base. The connecting hardware set is included, so the plate is ready to mount the moment it comes out of the box.

Conical Connection Hardware Included The ProX BP3636S ships with the connecting hardware set you need to attach your truss to the plate. You can set the base, mount your first conical segment and keep building without stopping to track down extra parts.

Fits F34, F32 and F31 Conical Square Truss This plate is made for ProX F34, F32 and F31 conical truss. ProX builds to industry standard dimensions that are compatible with most other truss manufacturers, so the ProX BP3636S can work with truss you already have in your inventory.

10mm All Steel Plate The ProX BP3636S is cut from 10mm steel and made completely from steel material. It is heavier than other base plates, and that weight is the whole point. Mass at the bottom of a tower lowers the center of gravity, which helps the build hold steady when it gets bumped by crew, guests or rolling carts during load in and through the night.

Wide 36" Square Footprint At 36" x 36", the ProX BP3636S spreads its support out in every direction. That broad stance is a strong match for taller totems and builds that carry more weight up top, where a smaller plate may not give you the margin you want.

Black Finish The black finish keeps the base low key on dark stages and against pipe and drape, so attention stays on the performer, the display or the product being shown. It also pairs with ProX black finish F34 truss for a clean, matching look from floor to top.

Built for Totems and Flat Screen Displays Since it is heavier than other base plates, the ProX BP3636S is ideal for securing flat screen TVs on totem truss. A solid base helps keep the display from falling over and causing injury, which is exactly the peace of mind you want at weddings, corporate events and trade shows where people move close to the build.

Handle With Care The plate has sharp straight edges and weighs 105 lbs. Wear work gloves, plan on two people to lift and place it, and keep it away from soft cases and cables when it is loaded for transport.

Complete Your Setup Pair the ProX BP3636S with ProX F34 conical truss segments in black finish for a matching tower. For safe storage and travel, add a ProX base plate bag or a ProX stage truss and base plate case to keep the plate and the rest of your gear protected.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX BP3636S is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Includes Connecting Hardware Set for mounting conical truss to the plate
• Fits F34, F32 and F31 Conical Square Truss from ProX
• Compatible With Other Brands built to industry standard dimensions used by most truss manufacturers
• 10mm Plate Thickness for a solid, heavy base
• All Steel Construction heavier than other base plates for a more stable tower
• Wide 36" Square Footprint spreads support in every direction
• Ideal for Totem Truss including flat screen TV display setups
• Black Finish blends into stages and event decor and matches ProX black truss
• Caution: Sharp Straight Edges wear gloves when handling
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.