Pair of 12" Aluminum 6mm Truss Top Plate for F34 F32 F31 Conical Square Truss with Connectors

Overview

Featuring the ProX XT-BP12AX2 Pair of 12" Aluminum 6mm Truss Top and Base Plates. Every truss build starts at the plate, and if that plate is thin, rough, or a poor fit, the whole rig pays for it. This matched pair gives you two 12" x 12" aluminum plates cut for F34, F32 and F31 conical square truss, with slotted holes, a large cable routing cutout, smooth rounded edges, and the connecting hardware already in the box. So whether you’re standing up totems for a wedding, framing a DJ booth, or building a goal post for a corporate stage, you get a clean, solid start and finish to every vertical without hunting down extra parts.

Sold as a Pair Most truss setups use plates in twos, whether that means a base and a top on one totem or matching bases on two uprights. The ProX BP12A ships as a set of two, so you’re covered for a full vertical or a symmetrical pair right out of one box.

12" x 12" Footprint Each plate measures 12" x 12", a compact square that keeps the base of your truss tidy on stage, on a dance floor, or behind a booth. It gives the truss a flat, square seat at the bottom and a clean mounting surface at the top.

6mm Aluminum Plate At 6mm thick (just under 1/4"), the aluminum plate stays rigid under your truss while keeping the pair light enough to carry in and out of a gig with ease. Aluminum also holds up well to the constant setup and teardown that working crews put their gear through.

CNC Cut Slotted Holes The mounting holes are CNC cut as slots instead of fixed round holes. That extra room makes lining up your truss connections faster, so you spend less time fighting alignment and more time getting the show ready.

Large Cable Routing Cutout A large cut hole in the plate lets you run cables through instead of around. Power and signal lines can follow the truss cleanly, which keeps your rig looking professional and cuts down on loose cables where people walk.

Smooth Rounded Edges The edges are rounded and smooth, so they’re easier on hands during load in, on cases and bags in transport, and on floors and finishes at the venue.

Connecting Hardware Included The ProX BP12A comes with its connecting hardware set, so you can attach the plates to your truss as soon as they come out of the box.

Built for F34, F32 and F31 Conical Square Truss These plates are made to work with F34, F32 and F31 conical truss, which covers a wide range of square, I-beam and single tube builds in your inventory.

Industry Standard Compatibility ProX uses industry standard dimensions that are compatible with most other truss manufacturers, so the ProX BP12A can fit into a mixed inventory and keep working as your rig grows.

Complete Your Setup Want to mount a speaker on top? Add the ProX XT-SPST Speaker Mounting Stud, which is sold separately. And to keep your plates protected between gigs, the ProX XB-BP12TB Universal Gig Bag fits 12" top and base plates.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX BP12A is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

We also offer this as XT-BP12ASPST Top Plate + Speaker Mounting Stud Package.
This product does not include XT-SPST  Speaker Mounting Stud (Sold Separately)

• Sold as a Pair two plates per order for a full vertical or matching uprights
• 12" x 12" Square Plate compact footprint for top or base use
• 6mm Aluminum Construction rigid plate that stays easy to carry
• CNC Cut Slotted Holes easier alignment when connecting truss
• Large Cable Routing Cutout run cables through the plate for a cleaner rig
• Smooth Rounded Edges safer handling and less wear on gear and floors
• Connecting Hardware Included ready to attach right out of the box
• F34, F32 and F31 Conical Truss Fit works across square, I-beam and single tube builds
• Industry Standard Dimensions compatible with most other truss brands
• Speaker Stud Ready pairs with the ProX XT-SPST Speaker Mounting Stud (sold separately)
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Most F34, F32, F31 Truss Brands with Conical Connections

Compatibility

Most F34, F32, F31 Truss Brands with Conical Connections

Product details

Featuring the ProX XT-BP12AX2 Pair of 12" Aluminum 6mm Truss Top and Base Plates. Every truss build starts at the plate, and if that plate is thin, rough, or a poor fit, the whole rig pays for it. This matched pair gives you two 12" x 12" aluminum plates cut for F34, F32 and F31 conical square truss, with slotted holes, a large cable routing cutout, smooth rounded edges, and the connecting hardware already in the box. So whether you’re standing up totems for a wedding, framing a DJ booth, or building a goal post for a corporate stage, you get a clean, solid start and finish to every vertical without hunting down extra parts.

Sold as a Pair Most truss setups use plates in twos, whether that means a base and a top on one totem or matching bases on two uprights. The ProX BP12A ships as a set of two, so you’re covered for a full vertical or a symmetrical pair right out of one box.

12" x 12" Footprint Each plate measures 12" x 12", a compact square that keeps the base of your truss tidy on stage, on a dance floor, or behind a booth. It gives the truss a flat, square seat at the bottom and a clean mounting surface at the top.

6mm Aluminum Plate At 6mm thick (just under 1/4"), the aluminum plate stays rigid under your truss while keeping the pair light enough to carry in and out of a gig with ease. Aluminum also holds up well to the constant setup and teardown that working crews put their gear through.

CNC Cut Slotted Holes The mounting holes are CNC cut as slots instead of fixed round holes. That extra room makes lining up your truss connections faster, so you spend less time fighting alignment and more time getting the show ready.

Large Cable Routing Cutout A large cut hole in the plate lets you run cables through instead of around. Power and signal lines can follow the truss cleanly, which keeps your rig looking professional and cuts down on loose cables where people walk.

Smooth Rounded Edges The edges are rounded and smooth, so they’re easier on hands during load in, on cases and bags in transport, and on floors and finishes at the venue.

Connecting Hardware Included The ProX BP12A comes with its connecting hardware set, so you can attach the plates to your truss as soon as they come out of the box.

Built for F34, F32 and F31 Conical Square Truss These plates are made to work with F34, F32 and F31 conical truss, which covers a wide range of square, I-beam and single tube builds in your inventory.

Industry Standard Compatibility ProX uses industry standard dimensions that are compatible with most other truss manufacturers, so the ProX BP12A can fit into a mixed inventory and keep working as your rig grows.

Complete Your Setup Want to mount a speaker on top? Add the ProX XT-SPST Speaker Mounting Stud, which is sold separately. And to keep your plates protected between gigs, the ProX XB-BP12TB Universal Gig Bag fits 12" top and base plates.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX BP12A is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

We also offer this as XT-BP12ASPST Top Plate + Speaker Mounting Stud Package.
This product does not include XT-SPST  Speaker Mounting Stud (Sold Separately)

Key features

• Sold as a Pair two plates per order for a full vertical or matching uprights
• 12" x 12" Square Plate compact footprint for top or base use
• 6mm Aluminum Construction rigid plate that stays easy to carry
• CNC Cut Slotted Holes easier alignment when connecting truss
• Large Cable Routing Cutout run cables through the plate for a cleaner rig
• Smooth Rounded Edges safer handling and less wear on gear and floors
• Connecting Hardware Included ready to attach right out of the box
• F34, F32 and F31 Conical Truss Fit works across square, I-beam and single tube builds
• Industry Standard Dimensions compatible with most other truss brands
• Speaker Stud Ready pairs with the ProX XT-SPST Speaker Mounting Stud (sold separately)
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.