Flight case for Yamaha Rivage PM7 CSD-R7 PM10 CS-R10 Audio Console Mixer with Doghouse and Wheels by Santosom

Overview

ProX is proud to introduce the ProX XSM-YPM7PM10LMA PRO-32 Santosom Flight Case for Yamaha Rivage PM7 CSD-R7 and PM10 CS-R10 with Doghouse and Wheels. A Rivage PM7 or PM10 sits at the center of some of the biggest shows on the road, and the case that carries it has one job: get that console to front of house in the exact condition it left the shop, night after night, truck after truck. Santosom builds the ProX PRO-32 for engineers and production companies who refuse to settle. It is a protective shell, a cable store and a complete mix position in one, made in Portugal by a manufacturer known for doing things the right way. If you have invested in a flagship Yamaha console, this is the case that matches it.

Santosom Build Quality

You see the difference the first time you walk up to the ProX PRO-32. Every panel, every edge, every fastener and every finish has been executed with the kind of care that only comes from a maker that refuses to cut corners. The shell is built from 0.39" (10mm) laminated birch plywood throughout, chosen for its strength, rigidity and ability to take the daily knocks of loading in and loading out. Nothing about it feels generic, because a console at this level deserves a case built to the same standard.

Aluminum Profiles and Hardware

Every edge is reinforced with 1.38" x 1.38" (35 x 35mm) aluminum L angle profiles, so when the case meets a dock plate or a truck wall, the aluminum takes the hit and the panels don’t. Eight ball corners and eight corner braces lock the structure together at its most vulnerable points. Eight butterfly latches hold the lid securely closed, keeping your console sealed in from the moment it leaves the shop until it reaches the mix position.

Sized for Yamaha Rivage PM7 and PM10

The ProX PRO-32 is built for equipment measuring 61.02" x 33.46" x 16.54" (1550 x 850 x 420mm), matching the Rivage PM7 CSD-R7 and PM10 CS-R10 control surfaces. Exterior dimensions are 68.35" x 40.79" x 19.29" (1736 x 1036 x 490mm), with an approximate weight of 295 lbs. Plan your truck pack and your crew around those numbers. This is a large format touring case built for a large format console, and it is made to be handled like one.

Protective Interior Lining

Foam lining throughout the interior guards the console against scratches, scuffs and vibration in transit. The goal is simple. The console comes out of the case looking exactly the way it went in.

Rear Doghouse for Cable Management

A doghouse compartment at the rear gives your cables a dedicated home right behind the console. Everything you need stays close by and organized, so setup and strike move faster at every stop and loose cable ends are never rattling around in the truck.

A Complete Mix Position

This is where the ProX PRO-32 goes well past a standard console case. It includes a laptop support on a swivel arm and a monitor support on a swivel arm, plus compartments that store up to two external monitors. Sliding trays hold your keyboard and mouse or trackball, and separate sliding support trays hold headphones and a microphone. Open it up and your whole workspace is already in place, so there is no hunting for a side table or a spare chair at front of house.

Integrated LED Lighting Bar

A dimmable LED lighting bar lights the work surface in dark venues and during the show. You can see your peripherals and notes clearly without throwing a work light across the room or distracting the audience.

Recessed Sprung Handles

Twelve recessed sprung handles spread the lift across a full crew. When a case this size has to come off the truck or up a ramp, having enough hands on enough handles is what keeps people safe and the console level. The sprung design pulls each handle back into its recess when released, so the case profile stays clean in the truck.

Tour Label Dish

A 7.28" x 5.31" (185 x 135mm) tour label dish gives your crew a clear spot for tour labels and routing info, so the case lands in the right place at every venue.

Casters

Four blue wheels roll the ProX PRO-32 from the truck to the mix position, and two of them have brakes. The locking pair holds the case steady once you are set, which matters when the case doubles as your workstation for the entire show.

TAA Compliant

The ProX PRO-32 is TAA compliant, which makes it a fit for government, military, education and institutional purchases that require Trade Agreements Act compliance. Venue and corporate buyers working under strict procurement rules can specify it with confidence.

Made by Santosom in Portugal. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX PRO-32 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Fits Yamaha Rivage PM7 CSD-R7 and PM10 CS-R10 Built specifically for these control surfaces
• Santosom Build Quality Made in Portugal to Santosom’s top tier standard
• 10mm Laminated Birch Plywood Rigid, durable shell construction throughout
• 35 x 35mm Aluminum L Angle Profiles Reinforce every edge against impact
• 8 Ball Corners and 8 Corner Braces Strengthen and protect the corners
• 8 Butterfly Latches Hold the lid securely closed in transit
• 12 Recessed Sprung Handles Spread the lift across a full crew
• Tour Label Dish 185 x 135mm (7.28" x 5.31") for tour labels and routing info
• 4 Blue Wheels 2 with brakes to lock the case in place
• Rear Doghouse Dedicated cable storage behind the console
• Protective Foam Lining Guards against scratches and vibration
• Supports Swivel Arm Keeps your laptop positioned at the console
• Supports Swivel Arm Adjustable mount for an external screen
• Monitor Compartments Store up to 2 external monitors
• Keyboard and Mouse Tray Sliding tray for keyboard and mouse or trackball
• Headphone and Microphone Trays Sliding support trays keep both within reach
• Dimmable LED Lighting Bar Lights the work surface in dark venues
• TAA Compliant Suitable for government and institutional purchasing
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

ProX is proud to introduce the ProX XSM-YPM7PM10LMA PRO-32 Santosom Flight Case for Yamaha Rivage PM7 CSD-R7 and PM10 CS-R10 with Doghouse and Wheels. A Rivage PM7 or PM10 sits at the center of some of the biggest shows on the road, and the case that carries it has one job: get that console to front of house in the exact condition it left the shop, night after night, truck after truck. Santosom builds the ProX PRO-32 for engineers and production companies who refuse to settle. It is a protective shell, a cable store and a complete mix position in one, made in Portugal by a manufacturer known for doing things the right way. If you have invested in a flagship Yamaha console, this is the case that matches it.

Santosom Build Quality

You see the difference the first time you walk up to the ProX PRO-32. Every panel, every edge, every fastener and every finish has been executed with the kind of care that only comes from a maker that refuses to cut corners. The shell is built from 0.39" (10mm) laminated birch plywood throughout, chosen for its strength, rigidity and ability to take the daily knocks of loading in and loading out. Nothing about it feels generic, because a console at this level deserves a case built to the same standard.

Aluminum Profiles and Hardware

Every edge is reinforced with 1.38" x 1.38" (35 x 35mm) aluminum L angle profiles, so when the case meets a dock plate or a truck wall, the aluminum takes the hit and the panels don’t. Eight ball corners and eight corner braces lock the structure together at its most vulnerable points. Eight butterfly latches hold the lid securely closed, keeping your console sealed in from the moment it leaves the shop until it reaches the mix position.

Sized for Yamaha Rivage PM7 and PM10

The ProX PRO-32 is built for equipment measuring 61.02" x 33.46" x 16.54" (1550 x 850 x 420mm), matching the Rivage PM7 CSD-R7 and PM10 CS-R10 control surfaces. Exterior dimensions are 68.35" x 40.79" x 19.29" (1736 x 1036 x 490mm), with an approximate weight of 295 lbs. Plan your truck pack and your crew around those numbers. This is a large format touring case built for a large format console, and it is made to be handled like one.

Protective Interior Lining

Foam lining throughout the interior guards the console against scratches, scuffs and vibration in transit. The goal is simple. The console comes out of the case looking exactly the way it went in.

Rear Doghouse for Cable Management

A doghouse compartment at the rear gives your cables a dedicated home right behind the console. Everything you need stays close by and organized, so setup and strike move faster at every stop and loose cable ends are never rattling around in the truck.

A Complete Mix Position

This is where the ProX PRO-32 goes well past a standard console case. It includes a laptop support on a swivel arm and a monitor support on a swivel arm, plus compartments that store up to two external monitors. Sliding trays hold your keyboard and mouse or trackball, and separate sliding support trays hold headphones and a microphone. Open it up and your whole workspace is already in place, so there is no hunting for a side table or a spare chair at front of house.

Integrated LED Lighting Bar

A dimmable LED lighting bar lights the work surface in dark venues and during the show. You can see your peripherals and notes clearly without throwing a work light across the room or distracting the audience.

Recessed Sprung Handles

Twelve recessed sprung handles spread the lift across a full crew. When a case this size has to come off the truck or up a ramp, having enough hands on enough handles is what keeps people safe and the console level. The sprung design pulls each handle back into its recess when released, so the case profile stays clean in the truck.

Tour Label Dish

A 7.28" x 5.31" (185 x 135mm) tour label dish gives your crew a clear spot for tour labels and routing info, so the case lands in the right place at every venue.

Casters

Four blue wheels roll the ProX PRO-32 from the truck to the mix position, and two of them have brakes. The locking pair holds the case steady once you are set, which matters when the case doubles as your workstation for the entire show.

TAA Compliant

The ProX PRO-32 is TAA compliant, which makes it a fit for government, military, education and institutional purchases that require Trade Agreements Act compliance. Venue and corporate buyers working under strict procurement rules can specify it with confidence.

Made by Santosom in Portugal. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX PRO-32 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Fits Yamaha Rivage PM7 CSD-R7 and PM10 CS-R10 Built specifically for these control surfaces
• Santosom Build Quality Made in Portugal to Santosom’s top tier standard
• 10mm Laminated Birch Plywood Rigid, durable shell construction throughout
• 35 x 35mm Aluminum L Angle Profiles Reinforce every edge against impact
• 8 Ball Corners and 8 Corner Braces Strengthen and protect the corners
• 8 Butterfly Latches Hold the lid securely closed in transit
• 12 Recessed Sprung Handles Spread the lift across a full crew
• Tour Label Dish 185 x 135mm (7.28" x 5.31") for tour labels and routing info
• 4 Blue Wheels 2 with brakes to lock the case in place
• Rear Doghouse Dedicated cable storage behind the console
• Protective Foam Lining Guards against scratches and vibration
• Supports Swivel Arm Keeps your laptop positioned at the console
• Supports Swivel Arm Adjustable mount for an external screen
• Monitor Compartments Store up to 2 external monitors
• Keyboard and Mouse Tray Sliding tray for keyboard and mouse or trackball
• Headphone and Microphone Trays Sliding support trays keep both within reach
• Dimmable LED Lighting Bar Lights the work surface in dark venues
• TAA Compliant Suitable for government and institutional purchasing
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.