Video Controller FC Regie Blackmagic ATEM 1M/E Advanced Panel, 2 screens 8U + 3U by Santosom

Overview

Introducing the ProX XSM-AVATEM1M 3X8U 3X3U Video Controller Flight Case for Blackmagic ATEM 1 M/E Advanced Panel, 2 Screens, 8U + 3U by Santosom, a case built around one job: keeping the routing and control gear behind your Blackmagic ATEM 1 M/E panel organized, protected, and ready to roll into a broadcast truck or FOH position. When the switcher and its supporting rack gear travel together as one unit instead of scattered across separate boxes, setup gets faster and nothing goes missing on the day of the show. Built by Santosom in Portugal as part of their Professional Series, the ProX XSM-AVATEM1M is made for broadcast engineers, live streaming crews, and touring AV techs who need their control rack to survive the road and still roll straight into position once it gets there.

4 Part Santosom Professional Series Construction The shell is built from 10mm laminated Birch Ply across a 4 part frame, giving it the density and structural integrity to protect sensitive routing and control electronics through repeated load in and load out cycles. Birch ply is the standard in professional case building because it takes an impact and holds its shape over years of use.

32x32mm Aluminum Profile and Hybrid Lids Every edge is reinforced with a 32x32mm aluminum profile, and hybrid aluminum lids close out the top and bottom to keep the structure square and resistant to warping. Edges and corners take the worst abuse in transit, so this is where the reinforcement matters most.

10 Large Butterfly Latches, 8 Ball Corners, 16 Corner Braces Ten large butterfly latches secure the lids under heavy vibration and rough handling, while 8 ball corners and 16 corner braces absorb impact at the points most likely to take a hit during a truck pack or forklift move.

4 Heavy Duty Recessed Handles Four heavy duty recessed handles are positioned for balanced two person or four person lifts on a case this size, with nothing protruding to snag on doorways or truck walls.

4 Blue Casters, 2 with Brakes Four blue casters, two of them lockable with brakes, let the case roll into position at FOH or in a broadcast truck and stay put once it gets there, no chocks or straps required to keep it from drifting.

Convertible Lid to Free Standing Table Rather than sitting idle once the case is open, the lid panels convert into a free standing table, giving engineers an instant surface for a laptop, paperwork, or extra monitoring gear right at the workstation.

3U Front and 8U Rear 19" Rack Layout Inside, a three rack layout spans 490mm of depth, built to house the Blackmagic ATEM 1 M/E Advanced Panel alongside routers and supporting peripherals. The 3U front section and 8U rear section keep the control panel and signal processing gear in one protected enclosure instead of split across separate racks.

Tour Label Dish A built in tour label dish measuring 7.28" x 5.31" (185 x 135mm) mounts routing and inventory labels flat and protected, so a busy touring inventory stays organized case by case.

TAA Compliant The ProX XSM-AVATEM1M is TAA compliant, making it eligible for government, military, education, and other institutional purchasing programs that require it.

Made by Santosom in Portugal. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real world feedback directly shapes the products we bring to market. The ProX XSM-AVATEM1M is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands on expertise and a brand that has never stopped raising the standard for live performance gear.

• 4 Part Santosom Professional Series Construction built from 10mm laminated Birch Ply for long term durability under touring conditions
• 32x32mm Aluminum Profile Frame reinforces every edge and corner against impact
• Hybrid Aluminum Lids keep the shell square and resistant to warping
• 10 Large Butterfly Latches hold the case securely closed during transport
• 8 Ball Corners and 16 Corner Braces protect the most impact prone points of the case
• 4 Heavy Duty Recessed Handles allow for balanced lifting and carrying
• 4 Blue Casters, 2 with Brakes for smooth rolling and stable positioning once parked
• Convertible Lid to Free Standing Table adds instant workspace at the control position
• 3U Front and 8U Rear 19" Rack Layout across 490mm of depth, purpose built for the Blackmagic ATEM 1 M/E Advanced Panel and supporting gear
• 7.28 x 5.31 in Tour Label Dish for fast identification across a touring inventory
• TAA Compliant, Made in Portugal for institutional and government purchasing eligibility
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XSM-AVATEM1M 3X8U 3X3U Video Controller Flight Case for Blackmagic ATEM 1 M/E Advanced Panel, 2 Screens, 8U + 3U by Santosom, a case built around one job: keeping the routing and control gear behind your Blackmagic ATEM 1 M/E panel organized, protected, and ready to roll into a broadcast truck or FOH position. When the switcher and its supporting rack gear travel together as one unit instead of scattered across separate boxes, setup gets faster and nothing goes missing on the day of the show. Built by Santosom in Portugal as part of their Professional Series, the ProX XSM-AVATEM1M is made for broadcast engineers, live streaming crews, and touring AV techs who need their control rack to survive the road and still roll straight into position once it gets there.

4 Part Santosom Professional Series Construction The shell is built from 10mm laminated Birch Ply across a 4 part frame, giving it the density and structural integrity to protect sensitive routing and control electronics through repeated load in and load out cycles. Birch ply is the standard in professional case building because it takes an impact and holds its shape over years of use.

32x32mm Aluminum Profile and Hybrid Lids Every edge is reinforced with a 32x32mm aluminum profile, and hybrid aluminum lids close out the top and bottom to keep the structure square and resistant to warping. Edges and corners take the worst abuse in transit, so this is where the reinforcement matters most.

10 Large Butterfly Latches, 8 Ball Corners, 16 Corner Braces Ten large butterfly latches secure the lids under heavy vibration and rough handling, while 8 ball corners and 16 corner braces absorb impact at the points most likely to take a hit during a truck pack or forklift move.

4 Heavy Duty Recessed Handles Four heavy duty recessed handles are positioned for balanced two person or four person lifts on a case this size, with nothing protruding to snag on doorways or truck walls.

4 Blue Casters, 2 with Brakes Four blue casters, two of them lockable with brakes, let the case roll into position at FOH or in a broadcast truck and stay put once it gets there, no chocks or straps required to keep it from drifting.

Convertible Lid to Free Standing Table Rather than sitting idle once the case is open, the lid panels convert into a free standing table, giving engineers an instant surface for a laptop, paperwork, or extra monitoring gear right at the workstation.

3U Front and 8U Rear 19" Rack Layout Inside, a three rack layout spans 490mm of depth, built to house the Blackmagic ATEM 1 M/E Advanced Panel alongside routers and supporting peripherals. The 3U front section and 8U rear section keep the control panel and signal processing gear in one protected enclosure instead of split across separate racks.

Tour Label Dish A built in tour label dish measuring 7.28" x 5.31" (185 x 135mm) mounts routing and inventory labels flat and protected, so a busy touring inventory stays organized case by case.

TAA Compliant The ProX XSM-AVATEM1M is TAA compliant, making it eligible for government, military, education, and other institutional purchasing programs that require it.

Made by Santosom in Portugal. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real world feedback directly shapes the products we bring to market. The ProX XSM-AVATEM1M is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• 4 Part Santosom Professional Series Construction built from 10mm laminated Birch Ply for long term durability under touring conditions
• 32x32mm Aluminum Profile Frame reinforces every edge and corner against impact
• Hybrid Aluminum Lids keep the shell square and resistant to warping
• 10 Large Butterfly Latches hold the case securely closed during transport
• 8 Ball Corners and 16 Corner Braces protect the most impact prone points of the case
• 4 Heavy Duty Recessed Handles allow for balanced lifting and carrying
• 4 Blue Casters, 2 with Brakes for smooth rolling and stable positioning once parked
• Convertible Lid to Free Standing Table adds instant workspace at the control position
• 3U Front and 8U Rear 19" Rack Layout across 490mm of depth, purpose built for the Blackmagic ATEM 1 M/E Advanced Panel and supporting gear
• 7.28 x 5.31 in Tour Label Dish for fast identification across a touring inventory
• TAA Compliant, Made in Portugal for institutional and government purchasing eligibility
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.