Video Control Workstation Flight Case 16U + 5U Rack with Dual Side Tables & Triple Monitor Mount by Santosom

Overview

Introducing the ProX XSM-AV16UWOPTO Video Control Workstation Flight Case 16U + 5U Rack with Dual Side Tables & Triple Monitor Mount by Santosom, a complete mobile control position for video crews who need to roll in, open up, and go live without hunting for tables, monitor stands, or extra racks. When the show starts, your switcher, processors, and monitors all need to be set up and within reach. The ProX OPTO puts rack space, a switcher compartment, three monitor positions, and two work tables into one case that travels as a single unit. For AV rental companies, broadcast teams, streaming producers, and corporate AV crews, that means faster load in, a cleaner control area, and less loose gear to track on every job.

Rugged Case Construction Built by Santosom with laminated plywood, reinforced aluminum edging, and heavy duty hardware, the ProX OPTO is made to protect high value production gear through truck packs, dock loads, and repeated rental cycles. Exterior dimensions are 49"H x 31.5"W x 31.5"L with a weight of 192 lbs, so a full control position packs into one compact, square footprint that's easy to plan around in a truck or a tight back of house space.

Slide Up Top Cover with Center Monitor Mount The top cover slides up and carries an integrated VESA mount for a center monitor up to 32". Your main program or multiview display sits right above the controls, and there's no separate monitor stand to pack, set up, or leave behind at the shop.

Top Mixer Compartment Under the top cover, the switcher compartment measures 29"W x 21"D x 6"H. That gives you room for a video switcher, control surface, or compact console, set into the case and ready to work as soon as the lid is up.

5U Top Rack Section A 5U vertical rack section at the top uses 4" deep front to rear rails. It's the right spot for shallow gear you want close at hand during the show, like control interfaces, panels, and small units the operator reaches for often.

Triple Monitor Setup Two side swivel arms with universal VESA 100 / 75 mounts join the center display to create a full three monitor control position. Operators can angle each side screen to fit their workflow, whether that's previews, playback, graphics, or stream output. When it's time to pack up, the swivel arms go into two storage bags fixed inside the lids, so the parts stay organized and protected in transit.

Convertible Side Tables The front and rear doors convert into side tables, each measuring 31.5" x 42.1". Each table sets to 2 height positions, so the station can be run seated or standing. That's real workspace for a laptop, run of show, intercom, or a second operator, without bringing folding tables to the gig.

16U Lower Rack The 16U vertical lower rack has 20" deep front to rear rails for full size AV equipment. Routers, processors, recorders, playback systems, and servers can stay racked between shows, which cuts setup time and lowers the chance of mistakes when the clock is running.

Monitor Storage Two monitor storage spaces next to the lower rack hold displays up to 32". Your side screens travel inside the same case as the rest of the system instead of in separate boxes that can get lost or damaged.

Locking Casters Heavy duty casters with locking brakes let you roll the ProX OPTO from the truck to the control position, then lock it in place so it stays put through the show.

TAA Compliant The ProX OPTO is TAA compliant, making it a strong fit for government, education, and institutional AV purchases where TAA compliance is required.

Made by Santosom in Portugal. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX OPTO is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• All in One Video Control Workstation rack space, switcher compartment, triple monitor mounting, and dual side tables in one mobile case
• Rugged Construction laminated plywood, reinforced aluminum edging, and heavy duty hardware
• Exterior Dimensions 49"H x 31.5"W x 31.5"L, 192 lbs
• Slide Up Top Cover integrated VESA mount for a center monitor up to 32"
• Top Mixer Compartment 29"W x 21"D x 6"H for video switchers, control surfaces, and compact consoles
• 5U Vertical Top Rack 4" deep front to rear rails for shallow gear and control interfaces
• Side Swivel Arms 2 universal VESA 100 / 75 mounts for a full three monitor setup
• Swivel Arm Storage 2 bags fixed into the lids for organized transport
• Convertible Side Tables front and rear doors convert into 31.5" x 42.1" work tables
• Adjustable Table Height 2 height positions on each side for seated or standing operation
• 16U Vertical Lower Rack 20" deep front to rear rails for full size AV equipment
• Monitor Storage 2 storage spaces next to the lower rack for displays up to 32"
• Locking Casters heavy duty casters with brakes for easy moves and secure positioning
• TAA Compliant made by Santosom in Portugal
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XSM-AV16UWOPTO Video Control Workstation Flight Case 16U + 5U Rack with Dual Side Tables & Triple Monitor Mount by Santosom, a complete mobile control position for video crews who need to roll in, open up, and go live without hunting for tables, monitor stands, or extra racks. When the show starts, your switcher, processors, and monitors all need to be set up and within reach. The ProX OPTO puts rack space, a switcher compartment, three monitor positions, and two work tables into one case that travels as a single unit. For AV rental companies, broadcast teams, streaming producers, and corporate AV crews, that means faster load in, a cleaner control area, and less loose gear to track on every job.

Rugged Case Construction Built by Santosom with laminated plywood, reinforced aluminum edging, and heavy duty hardware, the ProX OPTO is made to protect high value production gear through truck packs, dock loads, and repeated rental cycles. Exterior dimensions are 49"H x 31.5"W x 31.5"L with a weight of 192 lbs, so a full control position packs into one compact, square footprint that's easy to plan around in a truck or a tight back of house space.

Slide Up Top Cover with Center Monitor Mount The top cover slides up and carries an integrated VESA mount for a center monitor up to 32". Your main program or multiview display sits right above the controls, and there's no separate monitor stand to pack, set up, or leave behind at the shop.

Top Mixer Compartment Under the top cover, the switcher compartment measures 29"W x 21"D x 6"H. That gives you room for a video switcher, control surface, or compact console, set into the case and ready to work as soon as the lid is up.

5U Top Rack Section A 5U vertical rack section at the top uses 4" deep front to rear rails. It's the right spot for shallow gear you want close at hand during the show, like control interfaces, panels, and small units the operator reaches for often.

Triple Monitor Setup Two side swivel arms with universal VESA 100 / 75 mounts join the center display to create a full three monitor control position. Operators can angle each side screen to fit their workflow, whether that's previews, playback, graphics, or stream output. When it's time to pack up, the swivel arms go into two storage bags fixed inside the lids, so the parts stay organized and protected in transit.

Convertible Side Tables The front and rear doors convert into side tables, each measuring 31.5" x 42.1". Each table sets to 2 height positions, so the station can be run seated or standing. That's real workspace for a laptop, run of show, intercom, or a second operator, without bringing folding tables to the gig.

16U Lower Rack The 16U vertical lower rack has 20" deep front to rear rails for full size AV equipment. Routers, processors, recorders, playback systems, and servers can stay racked between shows, which cuts setup time and lowers the chance of mistakes when the clock is running.

Monitor Storage Two monitor storage spaces next to the lower rack hold displays up to 32". Your side screens travel inside the same case as the rest of the system instead of in separate boxes that can get lost or damaged.

Locking Casters Heavy duty casters with locking brakes let you roll the ProX OPTO from the truck to the control position, then lock it in place so it stays put through the show.

TAA Compliant The ProX OPTO is TAA compliant, making it a strong fit for government, education, and institutional AV purchases where TAA compliance is required.

Made by Santosom in Portugal. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX OPTO is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• All in One Video Control Workstation rack space, switcher compartment, triple monitor mounting, and dual side tables in one mobile case
• Rugged Construction laminated plywood, reinforced aluminum edging, and heavy duty hardware
• Exterior Dimensions 49"H x 31.5"W x 31.5"L, 192 lbs
• Slide Up Top Cover integrated VESA mount for a center monitor up to 32"
• Top Mixer Compartment 29"W x 21"D x 6"H for video switchers, control surfaces, and compact consoles
• 5U Vertical Top Rack 4" deep front to rear rails for shallow gear and control interfaces
• Side Swivel Arms 2 universal VESA 100 / 75 mounts for a full three monitor setup
• Swivel Arm Storage 2 bags fixed into the lids for organized transport
• Convertible Side Tables front and rear doors convert into 31.5" x 42.1" work tables
• Adjustable Table Height 2 height positions on each side for seated or standing operation
• 16U Vertical Lower Rack 20" deep front to rear rails for full size AV equipment
• Monitor Storage 2 storage spaces next to the lower rack for displays up to 32"
• Locking Casters heavy duty casters with brakes for easy moves and secure positioning
• TAA Compliant made by Santosom in Portugal
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.