Universal Flight Style Road Case for Medium Sized DJ Controllers with Sliding Laptop Shelf

Overview

Introducing the ProX XS-UXLTMK2 Universal Flight Style Road Case for Medium Sized DJ Controllers with Sliding Laptop Shelf. Your controller and laptop run your whole show, and they take a beating every time you load in, load out, and pack the car. Soft bags dent, laptops slide around, and one bad drop can end a gig before it starts. The ProX UXLT MK2 fixes that with one hard case that protects your medium size DJ controller, gives your laptop its own sliding shelf, and opens up into a clean, ready to play workstation. And because it’s universal, it stays with you when you upgrade to a new controller.

Signature Honeycomb Digital™ Construction The shell and sliding laptop shelf are built from rugged 3/8" Gig-Ready Series plywood finished in Signature Honeycomb Digital™ laminate. The hexagon grid covers every shell surface and helps the case resist minor to mild scratches better than standard laminated plywood. The design was inspired by New York City manhole covers, which are made to take rough everyday punishment, so the case keeps looking sharp gig after gig. The black on black finish gives your setup a clean, professional look in front of any crowd.

Steel Ball Corners and Dual Anchor Rivets Heavy steel ball corners guard the edges, which take the most hits when a case gets bumped or dropped. They’re fastened with dual anchor rivets for added strength, and they make stacking easier in a van, trailer or storage room.

Recessed Latches and Handles ProX branded industrial recessed butterfly twist lock latches keep the lid locked tight and are padlock ready for extra security at venues and in storage. The spring action recessed handles sit flush with the shell so they don’t snag or break in transit. An aluminum tongue and groove lines up the lid for an easy, secure close every time.

Removable Front and Rear Panels The front and back panels come off so you can reach your controller’s front and rear controls, headphone and mic jacks, and connections without pulling it out of the case. A cable access hole with a removable emblem cover lets you route power and USB cleanly while you play.

Custom Fit Foam Interior This case is made universal for medium size digital DJ controllers. It comes with a good supply of high density foam inserts so you can build a snug, custom fit around your controller. That snug fit stops your gear from shifting on the road. When you upgrade, you can rework the foam for your new unit instead of buying a new case. Interior dimensions are 21.50"L x 13.00"W x 2.50"H. Any pictured controller or laptop is shown for reference only and is not included.

Sliding Laptop Shelf The built in sliding laptop shelf puts your laptop right above your controller during a set, without eating up extra table space. Slide it back in when you’re done. For the safety of your gear, don’t transport anything on the shelf, and note that the shelf can be removed when slid out to its furthest point.

Extra Cable and Accessory Space There’s added room at the back and underneath the unit for cables and small accessories. Your power cord, USB cable and other small items travel with your controller instead of in a separate bag.

Industrial Rubber Feet Four industrial grade rubber feet keep the case steady on tables and stages and protect the surface underneath.

CNC Precision Manufacturing Every ProX case is made with CNC technology to hold strict specs and tolerances, the same high standard ProX cases have been known for since 1984.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX UXLT MK2 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• ATA 300 Style Road Case built for regular gig transport
• Signature Honeycomb Digital™ Laminated 3/8" Plywood Gig-Ready Series shell that resists minor scratches
• ProX Premium Black on Black Design for a clean, professional look
• Heavy Steel Ball Corners and Dual Anchor Rivets for edge protection and easy stacking
• ProX Branded Industrial Recessed Butterfly Twist Lock Latches padlock ready
• ProX Branded Spring Action Recessed Handles sit flush to prevent damage
• Aluminum Tongue and Groove for an easy, locking lid fit
• Removable Front and Rear Panels for access to controls, jacks and connections
• Cable Access Hole with removable emblem cover
• High Density Foam Inserts for a custom snug fit on medium size controllers
• Sliding Laptop Shelf keeps your laptop above the controller during your set
• Extra Storage Space at the rear and underneath for cables and small accessories
• Four Industrial Grade Rubber Feet for stable, surface safe placement
• CNC Precision Built to strict ProX specs and tolerances
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XS-UXLTMK2 Universal Flight Style Road Case for Medium Sized DJ Controllers with Sliding Laptop Shelf. Your controller and laptop run your whole show, and they take a beating every time you load in, load out, and pack the car. Soft bags dent, laptops slide around, and one bad drop can end a gig before it starts. The ProX UXLT MK2 fixes that with one hard case that protects your medium size DJ controller, gives your laptop its own sliding shelf, and opens up into a clean, ready to play workstation. And because it’s universal, it stays with you when you upgrade to a new controller.

Signature Honeycomb Digital™ Construction The shell and sliding laptop shelf are built from rugged 3/8" Gig-Ready Series plywood finished in Signature Honeycomb Digital™ laminate. The hexagon grid covers every shell surface and helps the case resist minor to mild scratches better than standard laminated plywood. The design was inspired by New York City manhole covers, which are made to take rough everyday punishment, so the case keeps looking sharp gig after gig. The black on black finish gives your setup a clean, professional look in front of any crowd.

Steel Ball Corners and Dual Anchor Rivets Heavy steel ball corners guard the edges, which take the most hits when a case gets bumped or dropped. They’re fastened with dual anchor rivets for added strength, and they make stacking easier in a van, trailer or storage room.

Recessed Latches and Handles ProX branded industrial recessed butterfly twist lock latches keep the lid locked tight and are padlock ready for extra security at venues and in storage. The spring action recessed handles sit flush with the shell so they don’t snag or break in transit. An aluminum tongue and groove lines up the lid for an easy, secure close every time.

Removable Front and Rear Panels The front and back panels come off so you can reach your controller’s front and rear controls, headphone and mic jacks, and connections without pulling it out of the case. A cable access hole with a removable emblem cover lets you route power and USB cleanly while you play.

Custom Fit Foam Interior This case is made universal for medium size digital DJ controllers. It comes with a good supply of high density foam inserts so you can build a snug, custom fit around your controller. That snug fit stops your gear from shifting on the road. When you upgrade, you can rework the foam for your new unit instead of buying a new case. Interior dimensions are 21.50"L x 13.00"W x 2.50"H. Any pictured controller or laptop is shown for reference only and is not included.

Sliding Laptop Shelf The built in sliding laptop shelf puts your laptop right above your controller during a set, without eating up extra table space. Slide it back in when you’re done. For the safety of your gear, don’t transport anything on the shelf, and note that the shelf can be removed when slid out to its furthest point.

Extra Cable and Accessory Space There’s added room at the back and underneath the unit for cables and small accessories. Your power cord, USB cable and other small items travel with your controller instead of in a separate bag.

Industrial Rubber Feet Four industrial grade rubber feet keep the case steady on tables and stages and protect the surface underneath.

CNC Precision Manufacturing Every ProX case is made with CNC technology to hold strict specs and tolerances, the same high standard ProX cases have been known for since 1984.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX UXLT MK2 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• ATA 300 Style Road Case built for regular gig transport
• Signature Honeycomb Digital™ Laminated 3/8" Plywood Gig-Ready Series shell that resists minor scratches
• ProX Premium Black on Black Design for a clean, professional look
• Heavy Steel Ball Corners and Dual Anchor Rivets for edge protection and easy stacking
• ProX Branded Industrial Recessed Butterfly Twist Lock Latches padlock ready
• ProX Branded Spring Action Recessed Handles sit flush to prevent damage
• Aluminum Tongue and Groove for an easy, locking lid fit
• Removable Front and Rear Panels for access to controls, jacks and connections
• Cable Access Hole with removable emblem cover
• High Density Foam Inserts for a custom snug fit on medium size controllers
• Sliding Laptop Shelf keeps your laptop above the controller during your set
• Extra Storage Space at the rear and underneath for cables and small accessories
• Four Industrial Grade Rubber Feet for stable, surface safe placement
• CNC Precision Built to strict ProX specs and tolerances
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.