Universal Dual Column Array Combo Case, Holds 2x QSC KC12, RCF Evox J9, Jmix9

Overview

Featuring the ProX XS-SP2X262015WCL Universal Dual Column Array Combo Case, built for touring and installation crews who run dual-column array systems and need one case that protects the entire rig, not just half of it. This case stores two column array speakers plus two matching subwoofers together, purpose-fit for the QSC KC12, RCF EVOX J9, and Jmix9 compact array systems. Instead of juggling separate cases for tops and subs, everything travels as one unit, so load-in and load-out stay fast and your gear stays matched, protected, and ready to go for the next show.

Exterior Shell The ProX SP2X26 measures 39"L x 20.75"W x 35.5"H and weighs 112 lbs, built in the ATA-300 style flight/road case format using Signature Honeycomb Digital™ laminated 3/8" plywood for a shell that resists minor scratching far better than standard laminated plywood cases. The silver-on-black finish gives it a clean, road-tested look that holds up load after load. 

Interior Layout Inside, a removable 1" thick center divider shelf splits the case into two independent compartments, one for each array and subwoofer pairing, so both systems travel side by side without contact. Each divided compartment measures roughly 19"L x 18"W x 22"H on the interior, with high-density foam lining that keeps 14" of clearance foam to foam, 5" foam to the side walls, and 8" from the top of the foam down to the base, cushioning the array speakers on every side.

Lower base section which houses the subwoofers measures 37.25"L x 18.75"W x 12"H on the exterior. Built into that base are three separate interior chambers, each 36"L x 5.5"W x 6.75"H, dedicated to holding speaker poles and related hardware separately from the subwoofers themselves, so nothing shifts around loose during transit. An aluminum tongue and groove fit locks the lid down evenly against the base for a tight, reliable seal every time it closes.

Corners, Latches, and Hardware Heavy steel ball corners and dual anchor rivets reinforce the shell at its most impact-prone points, while ProX branded industrial recessed butterfly twist-lock latches keep the lid secured and are padlock ready for extra security when the case is in transit or storage.

Handling and Mobility ProX branded spring action rubber grip recessed handles keep the grips out of the way during transit and comfortable to carry when it's time to move the case by hand. For rolling it through venues and loading docks, four industrial grade 4" casters are built in, two of them locking, so the case stays put once it's positioned.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX SP2X26 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• ProX Standard Silver on Black Design
• ATA-300 Style Flight/Road Case
• Signature Honeycomb Digital™ Laminated 3/8" Plywood
• ProX Heavy and Powerful Steel Ball Corners & Dual Anchor Rivets
• ProX Branded Industrial Recessed Butterfly Twist-Lock Latches - Padlock Ready
• High-density Foam Interior Support & Casing
• ProX Branded Spring Action Rubber Grip Recessed Handles
• Easy Locking Fit Aluminum Tongue and Groove
• ProX Industrial Grade 4" Tough Casters, 2 Locking
• ProX Lifetime Warranty

Product details

Featuring the ProX XS-SP2X262015WCL Universal Dual Column Array Combo Case, built for touring and installation crews who run dual-column array systems and need one case that protects the entire rig, not just half of it. This case stores two column array speakers plus two matching subwoofers together, purpose-fit for the QSC KC12, RCF EVOX J9, and Jmix9 compact array systems. Instead of juggling separate cases for tops and subs, everything travels as one unit, so load-in and load-out stay fast and your gear stays matched, protected, and ready to go for the next show.

Exterior Shell The ProX SP2X26 measures 39"L x 20.75"W x 35.5"H and weighs 112 lbs, built in the ATA-300 style flight/road case format using Signature Honeycomb Digital™ laminated 3/8" plywood for a shell that resists minor scratching far better than standard laminated plywood cases. The silver-on-black finish gives it a clean, road-tested look that holds up load after load. 

Interior Layout Inside, a removable 1" thick center divider shelf splits the case into two independent compartments, one for each array and subwoofer pairing, so both systems travel side by side without contact. Each divided compartment measures roughly 19"L x 18"W x 22"H on the interior, with high-density foam lining that keeps 14" of clearance foam to foam, 5" foam to the side walls, and 8" from the top of the foam down to the base, cushioning the array speakers on every side.

Lower base section which houses the subwoofers measures 37.25"L x 18.75"W x 12"H on the exterior. Built into that base are three separate interior chambers, each 36"L x 5.5"W x 6.75"H, dedicated to holding speaker poles and related hardware separately from the subwoofers themselves, so nothing shifts around loose during transit. An aluminum tongue and groove fit locks the lid down evenly against the base for a tight, reliable seal every time it closes.

Corners, Latches, and Hardware Heavy steel ball corners and dual anchor rivets reinforce the shell at its most impact-prone points, while ProX branded industrial recessed butterfly twist-lock latches keep the lid secured and are padlock ready for extra security when the case is in transit or storage.

Handling and Mobility ProX branded spring action rubber grip recessed handles keep the grips out of the way during transit and comfortable to carry when it's time to move the case by hand. For rolling it through venues and loading docks, four industrial grade 4" casters are built in, two of them locking, so the case stays put once it's positioned.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX SP2X26 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• ProX Standard Silver on Black Design
• ATA-300 Style Flight/Road Case
• Signature Honeycomb Digital™ Laminated 3/8" Plywood
• ProX Heavy and Powerful Steel Ball Corners & Dual Anchor Rivets
• ProX Branded Industrial Recessed Butterfly Twist-Lock Latches - Padlock Ready
• High-density Foam Interior Support & Casing
• ProX Branded Spring Action Rubber Grip Recessed Handles
• Easy Locking Fit Aluminum Tongue and Groove
• ProX Industrial Grade 4" Tough Casters, 2 Locking
• ProX Lifetime Warranty