Universal Dual Speaker Flight Case Fits (2) 25x20x13 inch - JBL Eon one and simillar

Overview

Featuring the ProX XS-SP2X252013W Universal Dual Speaker Flight Case. Two portable PA speakers sliding around in the back of a van is how grilles get dented, corners get cracked, and a gig starts with a scramble instead of a soundcheck. This case fixes that by giving both speakers their own padded compartment inside one rolling hard shell. You load once, roll once, and set up with speakers that look and sound exactly like they did when you packed them. For mobile DJs, AV production crews, bands, and rental companies who move the same pair of speakers week after week, it turns two awkward carries into one clean trip from the truck to the stage.

Built to Take a Beating Every ProX case is cut with CNC technology, so the build stays consistent and true to spec from one case to the next. The shell is 3/8" laminated plywood finished in our Signature Honeycomb Digital™ Surface, a hexagonal grid pattern that helps the case hold up against the minor scratches and scuffs that come with loading in and out every weekend. Silver hardware over a black finish keeps it looking sharp in a hotel ballroom or a club back hallway.

Hardware That Stays Put Reinforced dual anchor rivets lock the hardware into the shell, so latches and handles stay tight even after years of dock plates, ramps, and rough handling. It is the kind of detail you never think about until a cheaper case pops a rivet halfway through a tour.

Two Speakers, Two Compartments Inside, a single divider splits the case into two separate spaces, one for each speaker. High density foam lines the interior to soak up impact and keep each cabinet from shifting. Because every speaker has its own spot, they never knock into each other on rough roads or sudden stops, and you always know exactly where each one goes at the end of the night.

Universal Fit The ProX XS-SP2X252013W is built for two speakers measuring up to 25" x 20" x 13" each, including the JBL EON One and similar sized models. Being universal means it can stay in service as your speaker lineup changes, so always check your speaker measurements against the interior before you order.

Greener Padding ProX switched to high density rubber foam padding made with 70% recycled materials. Most of that recycled content comes from everyday plastic bottles, and the rest comes from recycled industrial material, so you get the same protection with less waste.

Locked Down Lid Twist locking recessed butterfly latches keep the lid closed tight during transport. Since they sit recessed into the shell, they are less likely to snag on other gear or take a direct hit when the truck is packed full.

Comfortable Handling Recessed spring loaded rubber handles give you a solid grip for lifting and steering, then pull back flush against the case when you let go. That keeps the profile clean for stacking and helps protect the handles themselves.

Stack It and Pack It The lid includes built in aluminum caster cups, so another case can stack on top with its wheels seated in place. This helps you build tight, stable rows when truck packing and keeps stacked cases from walking around in transit.

Roll Right In Four 4" steel casters carry the full load across parking lots, hallways, and stage ramps, with two locking casters to hold the case still on a slope or while you unload. One person can move both speakers at once, which saves time and saves your back on every load in.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-SP2X252013W is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Universal Dual Speaker Design Holds (2) speakers up to 25" x 20" x 13" each, including JBL EON One and similar sizes
• 3/8" Laminated Plywood Shell CNC built for consistent quality and strict specs
• Signature Honeycomb Digital™ Surface Hexagonal grid finish helps resist minor scratches and scuffs
• Silver Hardware with Black Finish Clean, professional look
• Reinforced Dual Anchor Rivets Keep hardware locked into the shell
• Single Divider Interior Separate compartment for each speaker
• High Density Foam Interior Absorbs impact and stops shifting in transit
• 70% Recycled Foam Content Made largely from recycled plastic bottles
• Twist Locking Recessed Butterfly Latches Secure closure with a snag free profile
• Recessed Spring Loaded Rubber Handles Sit flush when not in use
• Aluminum Caster Cups in Lid Stable stacking for truck packing
• (4) 4" Steel Casters Two locking casters for control on slopes and while loading
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Featuring the ProX XS-SP2X252013W Universal Dual Speaker Flight Case. Two portable PA speakers sliding around in the back of a van is how grilles get dented, corners get cracked, and a gig starts with a scramble instead of a soundcheck. This case fixes that by giving both speakers their own padded compartment inside one rolling hard shell. You load once, roll once, and set up with speakers that look and sound exactly like they did when you packed them. For mobile DJs, AV production crews, bands, and rental companies who move the same pair of speakers week after week, it turns two awkward carries into one clean trip from the truck to the stage.

Built to Take a Beating Every ProX case is cut with CNC technology, so the build stays consistent and true to spec from one case to the next. The shell is 3/8" laminated plywood finished in our Signature Honeycomb Digital™ Surface, a hexagonal grid pattern that helps the case hold up against the minor scratches and scuffs that come with loading in and out every weekend. Silver hardware over a black finish keeps it looking sharp in a hotel ballroom or a club back hallway.

Hardware That Stays Put Reinforced dual anchor rivets lock the hardware into the shell, so latches and handles stay tight even after years of dock plates, ramps, and rough handling. It is the kind of detail you never think about until a cheaper case pops a rivet halfway through a tour.

Two Speakers, Two Compartments Inside, a single divider splits the case into two separate spaces, one for each speaker. High density foam lines the interior to soak up impact and keep each cabinet from shifting. Because every speaker has its own spot, they never knock into each other on rough roads or sudden stops, and you always know exactly where each one goes at the end of the night.

Universal Fit The ProX XS-SP2X252013W is built for two speakers measuring up to 25" x 20" x 13" each, including the JBL EON One and similar sized models. Being universal means it can stay in service as your speaker lineup changes, so always check your speaker measurements against the interior before you order.

Greener Padding ProX switched to high density rubber foam padding made with 70% recycled materials. Most of that recycled content comes from everyday plastic bottles, and the rest comes from recycled industrial material, so you get the same protection with less waste.

Locked Down Lid Twist locking recessed butterfly latches keep the lid closed tight during transport. Since they sit recessed into the shell, they are less likely to snag on other gear or take a direct hit when the truck is packed full.

Comfortable Handling Recessed spring loaded rubber handles give you a solid grip for lifting and steering, then pull back flush against the case when you let go. That keeps the profile clean for stacking and helps protect the handles themselves.

Stack It and Pack It The lid includes built in aluminum caster cups, so another case can stack on top with its wheels seated in place. This helps you build tight, stable rows when truck packing and keeps stacked cases from walking around in transit.

Roll Right In Four 4" steel casters carry the full load across parking lots, hallways, and stage ramps, with two locking casters to hold the case still on a slope or while you unload. One person can move both speakers at once, which saves time and saves your back on every load in.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-SP2X252013W is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Universal Dual Speaker Design Holds (2) speakers up to 25" x 20" x 13" each, including JBL EON One and similar sizes
• 3/8" Laminated Plywood Shell CNC built for consistent quality and strict specs
• Signature Honeycomb Digital™ Surface Hexagonal grid finish helps resist minor scratches and scuffs
• Silver Hardware with Black Finish Clean, professional look
• Reinforced Dual Anchor Rivets Keep hardware locked into the shell
• Single Divider Interior Separate compartment for each speaker
• High Density Foam Interior Absorbs impact and stops shifting in transit
• 70% Recycled Foam Content Made largely from recycled plastic bottles
• Twist Locking Recessed Butterfly Latches Secure closure with a snag free profile
• Recessed Spring Loaded Rubber Handles Sit flush when not in use
• Aluminum Caster Cups in Lid Stable stacking for truck packing
• (4) 4" Steel Casters Two locking casters for control on slopes and while loading
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.