6U Vertical Shockmount Rack Case 20" Depth with Dual Top Sliding Slam Doors

Overview

Introducing the ProX XS-SLAM6U20 6U Vertical Shockmount Rack Case with 20" Depth and Dual Top Sliding Slam Doors. Anyone who has set up a rack on a tight stage knows the problem with removable lids. You pull them off, and then you need somewhere to put them. This compact 6U rack case solves that. The front and rear doors lift up and slide into the top of the case, so there are no loose lids to stack, lose, or trip over. Your wireless receivers, signal processors, power conditioners, and network switches ride on an internal shockmount rack with 20" of depth between the front and rear rails. Your gear stays protected on the truck and opens up fast when it is time to work.

ATA-300 Style Construction The ProX XS-SLAM6U20 is built in the ATA-300 style from AAA grade 3/8" (10mm) birch plywood. The plywood is a minimal void laminated structure, which gives the walls the strength to handle repeated load ins and load outs. A precision aluminum tongue and groove locking profile frames the case, and reinforced dual anchor rivets hold the hardware in place for the long haul. This is the part of a case you never think about until it fails, so ProX builds it to last.

Signature Honeycomb Digital™ Laminate The exterior is finished in the Signature Honeycomb Digital™ laminated surface. It gives the case a clean, professional look that fits in on a stage, in a control room, or at a front of house position. An integrated label dish on top gives you a dedicated spot to mark the rack, which helps a crew find the right case quickly when several racks are lined up together.

Compact Exterior Footprint The case measures 14.75" H x 22.25" W x 26.25" L on the outside and weighs 44 lbs empty. That size makes it a good fit for a wireless rack, a small processing rack, or a network and control rack that travels with a larger system. The stackable design lets you build it into a rack system and save floor space in the truck, the shop, or at the gig.

6U of 19" Rack Space with 20" Rail Depth Inside, the rack opening measures 10.50" H x 19" W, which gives you 6U of standard 19" rack space. Rack height is measured in rack units, and 1U equals 1.75". The rack has 20" of mounting depth between the front and rear rack rails, so you can secure gear at both the front and the back. Before you buy, measure your deepest piece of gear, including its rear connectors, to confirm it fits within that 20" depth.

Internal Shockmount Rack System The rack rails are mounted within a high performance internal shockmount system. The shockmount separates the rack frame from the outer shell, so vibration and impact from transport and handling are absorbed before they reach your equipment. That matters for sensitive electronics like wireless receivers, audio interfaces, and lighting control processors that get moved from venue to venue.

Dual Top Sliding Slam Doors This is what sets the case apart. Both the front and rear doors lift upward and retract into the top section of the case. The doors stay contained inside the case while open, so there is nothing to carry away and nothing to keep track of during the show. You get clear access to the front panels and to the rear connections, which makes patching and troubleshooting easier in tight production spaces, on stage, and in mobile setups.

Recessed Press to Unlock Latches Each door uses a recessed press to unlock latch. Press upward to release the latch, then lift the door and slide it into the top storage channel. Because the latches sit recessed into the door, they stay out of the way during transport and stacking.

Recessed Spring Loaded Handles Industrial grade recessed spring loaded rubber handles give you a solid grip when lifting and carrying the case. The handles sit flush when you let go, which keeps the sides clean for packing the case tightly next to other gear.

Rubber Feet Industrial rubber feet on the base keep the ProX XS-SLAM6U20 stable once it is set down. They help the case stay put on a stage deck, a table, or on top of another case.

ProX Limited Lifetime Warranty The ProX XS-SLAM6U20 is backed by the ProX Limited Lifetime Warranty. See the ProX warranty terms page for full coverage details.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-SLAM6U20 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Dual top sliding slam doors front and rear doors lift up and retract into the top of the case
• No removable lids doors stay contained in the case while open
• Recessed press to unlock latches press upward to release each door
• 6U vertical rack fits standard 19" rack mount equipment
• 20" rail to rail depth measured between the front and rear rack rails
• Internal shockmount system rack rails mounted within a shock absorbing frame that protects sensitive electronics
• ATA-300 style construction built for professional transport
• AAA grade 3/8" (10mm) birch plywood minimal void laminated structure for strength
• Signature Honeycomb Digital™ laminated exterior surface
• Aluminum tongue and groove precision locking profile
• Reinforced dual anchor rivets for long term durability
• Recessed spring loaded rubber handles industrial grade
• Integrated top label dish for case identification
• Stackable design for building rack systems
• Industrial rubber feet for stability
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XS-SLAM6U20 6U Vertical Shockmount Rack Case with 20" Depth and Dual Top Sliding Slam Doors. Anyone who has set up a rack on a tight stage knows the problem with removable lids. You pull them off, and then you need somewhere to put them. This compact 6U rack case solves that. The front and rear doors lift up and slide into the top of the case, so there are no loose lids to stack, lose, or trip over. Your wireless receivers, signal processors, power conditioners, and network switches ride on an internal shockmount rack with 20" of depth between the front and rear rails. Your gear stays protected on the truck and opens up fast when it is time to work.

ATA-300 Style Construction The ProX XS-SLAM6U20 is built in the ATA-300 style from AAA grade 3/8" (10mm) birch plywood. The plywood is a minimal void laminated structure, which gives the walls the strength to handle repeated load ins and load outs. A precision aluminum tongue and groove locking profile frames the case, and reinforced dual anchor rivets hold the hardware in place for the long haul. This is the part of a case you never think about until it fails, so ProX builds it to last.

Signature Honeycomb Digital™ Laminate The exterior is finished in the Signature Honeycomb Digital™ laminated surface. It gives the case a clean, professional look that fits in on a stage, in a control room, or at a front of house position. An integrated label dish on top gives you a dedicated spot to mark the rack, which helps a crew find the right case quickly when several racks are lined up together.

Compact Exterior Footprint The case measures 14.75" H x 22.25" W x 26.25" L on the outside and weighs 44 lbs empty. That size makes it a good fit for a wireless rack, a small processing rack, or a network and control rack that travels with a larger system. The stackable design lets you build it into a rack system and save floor space in the truck, the shop, or at the gig.

6U of 19" Rack Space with 20" Rail Depth Inside, the rack opening measures 10.50" H x 19" W, which gives you 6U of standard 19" rack space. Rack height is measured in rack units, and 1U equals 1.75". The rack has 20" of mounting depth between the front and rear rack rails, so you can secure gear at both the front and the back. Before you buy, measure your deepest piece of gear, including its rear connectors, to confirm it fits within that 20" depth.

Internal Shockmount Rack System The rack rails are mounted within a high performance internal shockmount system. The shockmount separates the rack frame from the outer shell, so vibration and impact from transport and handling are absorbed before they reach your equipment. That matters for sensitive electronics like wireless receivers, audio interfaces, and lighting control processors that get moved from venue to venue.

Dual Top Sliding Slam Doors This is what sets the case apart. Both the front and rear doors lift upward and retract into the top section of the case. The doors stay contained inside the case while open, so there is nothing to carry away and nothing to keep track of during the show. You get clear access to the front panels and to the rear connections, which makes patching and troubleshooting easier in tight production spaces, on stage, and in mobile setups.

Recessed Press to Unlock Latches Each door uses a recessed press to unlock latch. Press upward to release the latch, then lift the door and slide it into the top storage channel. Because the latches sit recessed into the door, they stay out of the way during transport and stacking.

Recessed Spring Loaded Handles Industrial grade recessed spring loaded rubber handles give you a solid grip when lifting and carrying the case. The handles sit flush when you let go, which keeps the sides clean for packing the case tightly next to other gear.

Rubber Feet Industrial rubber feet on the base keep the ProX XS-SLAM6U20 stable once it is set down. They help the case stay put on a stage deck, a table, or on top of another case.

ProX Limited Lifetime Warranty The ProX XS-SLAM6U20 is backed by the ProX Limited Lifetime Warranty. See the ProX warranty terms page for full coverage details.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-SLAM6U20 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Dual top sliding slam doors front and rear doors lift up and retract into the top of the case
• No removable lids doors stay contained in the case while open
• Recessed press to unlock latches press upward to release each door
• 6U vertical rack fits standard 19" rack mount equipment
• 20" rail to rail depth measured between the front and rear rack rails
• Internal shockmount system rack rails mounted within a shock absorbing frame that protects sensitive electronics
• ATA-300 style construction built for professional transport
• AAA grade 3/8" (10mm) birch plywood minimal void laminated structure for strength
• Signature Honeycomb Digital™ laminated exterior surface
• Aluminum tongue and groove precision locking profile
• Reinforced dual anchor rivets for long term durability
• Recessed spring loaded rubber handles industrial grade
• Integrated top label dish for case identification
• Stackable design for building rack systems
• Industrial rubber feet for stability
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.