12U 24" Deep Vertical Rack to Rack Shock Mount Case with 2 Sliding Slam Doors & 4" Caster Wheels

Overview

Featuring the ProX XS-SLAM12U24 12U 24" Deep Vertical Rack to Rack Shock Mount Case with 2 Sliding Slam Doors and 4" Caster Wheels, the rolling rack case for engineers, rental houses, and production crews who are tired of opening a rack after a long drive and wondering what shook loose. A full 12U of amps, processors, and mixer combo gear is a serious investment, and it takes a beating every time it goes up a ramp or across a parking lot. This case rides that gear on a shock mount system, gives you front and rear access through two sliding slam doors, and rolls on four 4" casters, so the rack comes off the truck in one piece and you can get to work right away.

Signature Honeycomb Digital™ Laminate The exterior is finished in Signature Honeycomb Digital™ laminate. This is the surface that takes the scrapes from truck walls, door frames, and other cases, so it is built to resist scuffs and scratches through steady use. It also keeps the case looking sharp when it is sitting in plain view of a client or an audience.

Exterior Dimensions With casters, the case measures 33"L x 24"W x 32"H and weighs 95 lbs. That gives you a full 12U shock mount rack in a footprint that still rolls through standard doorways and lines up neatly in a truck pack. One person can steer it into place, which matters on small crews and fast load ins.

12U Vertical Rack with 24" Rail Depth Inside is a 12U vertical rack with an interior that measures 21"H x 19"W x 24"L, with 24" from front rail to rear rail. That depth lets you rack power amps and other long chassis gear and support them at both ends, instead of letting heavy units hang off the front rail. Twelve spaces is enough for a complete amp rack, a wireless and processing rack, or a mixer combo rack that travels as one finished system.

4" of Extra Clearance on Both Sides of the Rack There is an extra 4" of space between the rack and the door on both rail sides. You can mount larger mixers, leave your connectors plugged in, and let cables hang off the back, and the doors still close without pinching anything. That means the rack stays wired between shows and setup becomes a matter of rolling in and plugging in.

Shock Mount Suspension The rack is isolated with 4 shockproof mounts on each of both racks, so the vibration and impact of transport gets absorbed before it reaches your equipment. The outer shell takes the hit and the gear inside rides it out. For sensitive electronics that travel week after week, this is the feature that pays for the case.

2 Sliding Slam Doors Front and rear sliding slam doors give you fast access to both sides of the rack. There are no loose lids to carry away, lean against a wall, or go looking for at the end of the night. Open the doors to patch and adjust, then close them when the show is over and roll out.

4" Caster Wheels Four 4" caster wheels sit at the base of the case and carry the weight across loading docks, ramps, and stage floors. A fully loaded 12U rack is not something you want to lift, and with this case you do not have to.

ProX Limited Lifetime Warranty The ProX XS-SLAM12U24 is backed by the ProX Limited Lifetime Warranty, covering the case in full. Moving parts such as casters are covered for 365 days from the date of purchase.

Rack drawers and panels shown in photos are not included.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-SLAM12U24 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Signature Honeycomb Digital™ Laminate exterior for a scuff resistant, professional finish
• 12U Vertical Shock Mount Rack sized for amp racks, effects racks, and mixer combo racks
• 24" Front to Rear Rail Depth supports deep rack gear at both ends
• Shock Mount Suspension with 4 shockproof mounts on each of both racks to absorb transport vibration and impact
• Front and Rear Sliding Slam Doors for fast access with no loose lids to store
• 4" of Extra Clearance between rack and door on both sides for larger mixers and connected cables
• Doors Close with Cables Attached so the rack can stay wired between shows
• 4x 4" Caster Wheels for easy one person rolling
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Featuring the ProX XS-SLAM12U24 12U 24" Deep Vertical Rack to Rack Shock Mount Case with 2 Sliding Slam Doors and 4" Caster Wheels, the rolling rack case for engineers, rental houses, and production crews who are tired of opening a rack after a long drive and wondering what shook loose. A full 12U of amps, processors, and mixer combo gear is a serious investment, and it takes a beating every time it goes up a ramp or across a parking lot. This case rides that gear on a shock mount system, gives you front and rear access through two sliding slam doors, and rolls on four 4" casters, so the rack comes off the truck in one piece and you can get to work right away.

Signature Honeycomb Digital™ Laminate The exterior is finished in Signature Honeycomb Digital™ laminate. This is the surface that takes the scrapes from truck walls, door frames, and other cases, so it is built to resist scuffs and scratches through steady use. It also keeps the case looking sharp when it is sitting in plain view of a client or an audience.

Exterior Dimensions With casters, the case measures 33"L x 24"W x 32"H and weighs 95 lbs. That gives you a full 12U shock mount rack in a footprint that still rolls through standard doorways and lines up neatly in a truck pack. One person can steer it into place, which matters on small crews and fast load ins.

12U Vertical Rack with 24" Rail Depth Inside is a 12U vertical rack with an interior that measures 21"H x 19"W x 24"L, with 24" from front rail to rear rail. That depth lets you rack power amps and other long chassis gear and support them at both ends, instead of letting heavy units hang off the front rail. Twelve spaces is enough for a complete amp rack, a wireless and processing rack, or a mixer combo rack that travels as one finished system.

4" of Extra Clearance on Both Sides of the Rack There is an extra 4" of space between the rack and the door on both rail sides. You can mount larger mixers, leave your connectors plugged in, and let cables hang off the back, and the doors still close without pinching anything. That means the rack stays wired between shows and setup becomes a matter of rolling in and plugging in.

Shock Mount Suspension The rack is isolated with 4 shockproof mounts on each of both racks, so the vibration and impact of transport gets absorbed before it reaches your equipment. The outer shell takes the hit and the gear inside rides it out. For sensitive electronics that travel week after week, this is the feature that pays for the case.

2 Sliding Slam Doors Front and rear sliding slam doors give you fast access to both sides of the rack. There are no loose lids to carry away, lean against a wall, or go looking for at the end of the night. Open the doors to patch and adjust, then close them when the show is over and roll out.

4" Caster Wheels Four 4" caster wheels sit at the base of the case and carry the weight across loading docks, ramps, and stage floors. A fully loaded 12U rack is not something you want to lift, and with this case you do not have to.

ProX Limited Lifetime Warranty The ProX XS-SLAM12U24 is backed by the ProX Limited Lifetime Warranty, covering the case in full. Moving parts such as casters are covered for 365 days from the date of purchase.

Rack drawers and panels shown in photos are not included.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-SLAM12U24 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Signature Honeycomb Digital™ Laminate exterior for a scuff resistant, professional finish
• 12U Vertical Shock Mount Rack sized for amp racks, effects racks, and mixer combo racks
• 24" Front to Rear Rail Depth supports deep rack gear at both ends
• Shock Mount Suspension with 4 shockproof mounts on each of both racks to absorb transport vibration and impact
• Front and Rear Sliding Slam Doors for fast access with no loose lids to store
• 4" of Extra Clearance between rack and door on both sides for larger mixers and connected cables
• Doors Close with Cables Attached so the rack can stay wired between shows
• 4x 4" Caster Wheels for easy one person rolling
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.