12U 20" Deep Vertical Rack to Rack Shock Mount Case with 2 Sliding Slam Doors & 4" Caster Wheels

Overview

Introducing the ProX XS-SLAM12U20 12U 20" Deep Vertical Shock Mount Rack Case with 2 Sliding Slam Doors and 4" Caster Wheels. Twelve rack spaces of amplifiers and processing is a lot of weight and a lot of money to move around, and the case it lives in decides how your load in goes. This one is built to keep it simple. Roll it in on four 4" caster wheels, slide the front and rear doors open, and you are working. The rack rides on shock mounts to protect your gear on the road, and with 20" between the rails plus 4" of extra room behind each door, you can keep your system wired and close the case without fighting your cables.

Signature Honeycomb Digital™ Laminate The exterior is finished in the Signature Honeycomb Digital™ laminated surface. It gives the case a clean, professional look that fits in on stage, in the studio, or at a front of house position.

Exterior Size and Weight With the casters on, the case measures 32" H x 24" W x 29" L and weighs 85 lbs empty. Knowing the full height with casters matters when you are planning a truck pack or checking whether the rack will fit under a table or riser. The footprint stays compact for a 12U rack, so it takes up little floor space at the venue.

12U Vertical Rack with 20" Rail Depth The interior rack space measures 21" H x 19" W x 20" L, giving you 12U for standard 19" rack equipment. Rack height is measured in rack units, and 1U equals 1.75". The 20" depth runs from the front rail to the rear rail, so deeper units like power amplifiers can be fastened at the front and supported at the back. Measure your deepest piece of gear before you buy to confirm it fits within that 20" depth.

4" of Clearance from Rack to Door There is an extra 4" of space between the rack and the door. This is one of the improvements built into the ProX slam door line, and you feel it on every job. Front panel controls that stick out past the rail have room, and cables can hang from the back of your gear without stopping the door from closing. That lets you leave more of the rack patched between shows and cut down your setup time.

Shock Mount Protection The rack is shock mounted inside the case. The mounts take up the bumps and vibration from ramps, truck beds, and rough floors before they reach your equipment. For a rack full of amplifiers and processors that travels every week, that protection helps your system keep working night after night.

2 Sliding Slam Doors Two sliding slam doors give you access to the front and the rear of the rack. Open the front to reach your controls, or open the back to patch and check connections. Quick access counts most when you are setting up against the clock or tracking down a problem during a show.

4" Caster Wheels Four 4" caster wheels sit at the base of the case. They let one person roll a loaded rack from the vehicle to the stage and position it at the venue or in the studio without lifting.

Rack Gear Not Included The racks and equipment shown in the product photos are for illustration only and are not included with the case.

ProX Limited Lifetime Warranty The ProX XS-SLAM12U20 is backed by the ProX Limited Lifetime Warranty, which covers the case in full. Moving parts, including casters, are covered for 365 days from the date of purchase.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-SLAM12U20 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• 2 sliding slam doors for front and rear access to the rack
• 12U vertical rack for standard 19" rack mount equipment
• 20" rail depth measured from the front rail to the rear rail
• Shock mount rack helps protect gear from bumps and vibration in transport
• 4" rack to door clearance room for cables and protruding gear with the doors closed
• Signature Honeycomb Digital™ laminated exterior surface
• Four 4" caster wheels for rolling a loaded rack into position
• Suited for amp racks and other 19" rack systems for stage and studio
• Rack gear not included equipment shown in photos is for illustration only
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XS-SLAM12U20 12U 20" Deep Vertical Shock Mount Rack Case with 2 Sliding Slam Doors and 4" Caster Wheels. Twelve rack spaces of amplifiers and processing is a lot of weight and a lot of money to move around, and the case it lives in decides how your load in goes. This one is built to keep it simple. Roll it in on four 4" caster wheels, slide the front and rear doors open, and you are working. The rack rides on shock mounts to protect your gear on the road, and with 20" between the rails plus 4" of extra room behind each door, you can keep your system wired and close the case without fighting your cables.

Signature Honeycomb Digital™ Laminate The exterior is finished in the Signature Honeycomb Digital™ laminated surface. It gives the case a clean, professional look that fits in on stage, in the studio, or at a front of house position.

Exterior Size and Weight With the casters on, the case measures 32" H x 24" W x 29" L and weighs 85 lbs empty. Knowing the full height with casters matters when you are planning a truck pack or checking whether the rack will fit under a table or riser. The footprint stays compact for a 12U rack, so it takes up little floor space at the venue.

12U Vertical Rack with 20" Rail Depth The interior rack space measures 21" H x 19" W x 20" L, giving you 12U for standard 19" rack equipment. Rack height is measured in rack units, and 1U equals 1.75". The 20" depth runs from the front rail to the rear rail, so deeper units like power amplifiers can be fastened at the front and supported at the back. Measure your deepest piece of gear before you buy to confirm it fits within that 20" depth.

4" of Clearance from Rack to Door There is an extra 4" of space between the rack and the door. This is one of the improvements built into the ProX slam door line, and you feel it on every job. Front panel controls that stick out past the rail have room, and cables can hang from the back of your gear without stopping the door from closing. That lets you leave more of the rack patched between shows and cut down your setup time.

Shock Mount Protection The rack is shock mounted inside the case. The mounts take up the bumps and vibration from ramps, truck beds, and rough floors before they reach your equipment. For a rack full of amplifiers and processors that travels every week, that protection helps your system keep working night after night.

2 Sliding Slam Doors Two sliding slam doors give you access to the front and the rear of the rack. Open the front to reach your controls, or open the back to patch and check connections. Quick access counts most when you are setting up against the clock or tracking down a problem during a show.

4" Caster Wheels Four 4" caster wheels sit at the base of the case. They let one person roll a loaded rack from the vehicle to the stage and position it at the venue or in the studio without lifting.

Rack Gear Not Included The racks and equipment shown in the product photos are for illustration only and are not included with the case.

ProX Limited Lifetime Warranty The ProX XS-SLAM12U20 is backed by the ProX Limited Lifetime Warranty, which covers the case in full. Moving parts, including casters, are covered for 365 days from the date of purchase.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-SLAM12U20 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• 2 sliding slam doors for front and rear access to the rack
• 12U vertical rack for standard 19" rack mount equipment
• 20" rail depth measured from the front rail to the rear rail
• Shock mount rack helps protect gear from bumps and vibration in transport
• 4" rack to door clearance room for cables and protruding gear with the doors closed
• Signature Honeycomb Digital™ laminated exterior surface
• Four 4" caster wheels for rolling a loaded rack into position
• Suited for amp racks and other 19" rack systems for stage and studio
• Rack gear not included equipment shown in photos is for illustration only
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.