10U 24" Deep Vertical Rack to Rack Shock Mount Case with 2 Sliding Slam Doors & 4" Caster Wheels

Overview

Introducing the ProX XS-SLAM10U24 10U 24" Deep Vertical Rack to Rack Shock Mount Case with 2 Sliding Slam Doors and 4" Caster Wheels, built for the crews, rental houses, and working engineers who need a rack of amps, processors, or mixer combo gear to roll off the truck and work the first time. Every load in puts rack gear through ramps, bumps, and hard stops, and a basic rack case passes all of that straight into your electronics. This case puts a full 10U of rack space on a shock mount system, opens fast through two sliding slam doors, and rolls on four 4" casters, so your rack shows up protected and you are wired up in minutes instead of fighting with lids.

Signature Honeycomb Digital™ Laminate The exterior is finished in Signature Honeycomb Digital™ laminate. This is the surface that takes the abuse on every load in, so it is built to resist the scuffs and scratches that come from truck packs, ramps, and tight backstage hallways. It also keeps the case looking clean and professional in front of clients, show after show.

Exterior Dimensions The case measures 33"W x 24"L x 23.5"H and weighs 109 lbs. That is a compact footprint for a 24" deep shock mount rack, so it lines up cleanly in a truck pack and tucks in beside a console or behind a stage without eating up floor space. You get full depth rack protection without hauling a case that takes two people to steer.

10U Vertical Rack with 24" Rail Depth Inside is a 10U vertical rack that measures 24" from front rail to rear rail. That depth matters when you are racking power amps and other deep chassis gear, because long units can be supported at both ends instead of hanging off the front rail alone. It is the right size for an amp rack, an effects and processing rack, or a mixer combo rack that needs to travel as one finished unit.

4" of Extra Clearance on Both Sides of the Rack There is an extra 4" of space between the rack and the door on both rail sides. This is the detail that saves time on every gig. You can mount larger mixers, leave your connectors plugged in, and let cables hang off the back, and the doors still close without anything getting pinched or bent. Your rack stays wired from one show to the next.

Shock Mount Suspension The rack is isolated with 4 shockproof mounts on each of both racks, so the vibration and impact of transport gets absorbed before it reaches your equipment. This is what separates a shock mount case from a standard rack box. The shell takes the hit and the gear inside rides it out, which is exactly what sensitive electronics need when they travel week after week.

2 Sliding Slam Doors Two sliding slam doors give you fast access to the rack. There are no loose lids to carry off, stack in a corner, or lose track of backstage. Open the doors, make your connections or adjustments, and close them up again when the show is over. During a tight changeover that speed is the difference between being ready on time and holding up the stage.

4" Caster Wheels Four 4" caster wheels sit at the base of the case and carry the load across loading docks, ramps, and stage floors. One person can roll a fully loaded rack into position without lifting it, which protects both the gear and your back.

ProX Limited Lifetime Warranty The ProX XS-SLAM10U24 is backed by the ProX Limited Lifetime Warranty, covering the case in full. Moving parts such as casters are covered for 365 days from the date of purchase.

Rack gear shown in photos is not included.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-SLAM10U24 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• 10U Vertical Shock Mount Rack sized for amp racks, effects racks, and mixer combo racks
• Signature Honeycomb Digital™ Laminate exterior for a scuff resistant, professional finish
• 24" Front to Rear Rail Depth supports deep rack gear at both ends
• Shock Mount Suspension with 4 shockproof mounts on each of both racks to absorb transport vibration and impact
• 2 Sliding Slam Doors for fast access with no loose lids to store
• 4" of Extra Clearance between rack and door on both sides for larger mixers and connected cables
• Doors Close with Cables Attached so the rack can stay wired between shows
• 4x 4" Caster Wheels for easy one person rolling
• Compact Footprint fits truck packs and tight backstage areas
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XS-SLAM10U24 10U 24" Deep Vertical Rack to Rack Shock Mount Case with 2 Sliding Slam Doors and 4" Caster Wheels, built for the crews, rental houses, and working engineers who need a rack of amps, processors, or mixer combo gear to roll off the truck and work the first time. Every load in puts rack gear through ramps, bumps, and hard stops, and a basic rack case passes all of that straight into your electronics. This case puts a full 10U of rack space on a shock mount system, opens fast through two sliding slam doors, and rolls on four 4" casters, so your rack shows up protected and you are wired up in minutes instead of fighting with lids.

Signature Honeycomb Digital™ Laminate The exterior is finished in Signature Honeycomb Digital™ laminate. This is the surface that takes the abuse on every load in, so it is built to resist the scuffs and scratches that come from truck packs, ramps, and tight backstage hallways. It also keeps the case looking clean and professional in front of clients, show after show.

Exterior Dimensions The case measures 33"W x 24"L x 23.5"H and weighs 109 lbs. That is a compact footprint for a 24" deep shock mount rack, so it lines up cleanly in a truck pack and tucks in beside a console or behind a stage without eating up floor space. You get full depth rack protection without hauling a case that takes two people to steer.

10U Vertical Rack with 24" Rail Depth Inside is a 10U vertical rack that measures 24" from front rail to rear rail. That depth matters when you are racking power amps and other deep chassis gear, because long units can be supported at both ends instead of hanging off the front rail alone. It is the right size for an amp rack, an effects and processing rack, or a mixer combo rack that needs to travel as one finished unit.

4" of Extra Clearance on Both Sides of the Rack There is an extra 4" of space between the rack and the door on both rail sides. This is the detail that saves time on every gig. You can mount larger mixers, leave your connectors plugged in, and let cables hang off the back, and the doors still close without anything getting pinched or bent. Your rack stays wired from one show to the next.

Shock Mount Suspension The rack is isolated with 4 shockproof mounts on each of both racks, so the vibration and impact of transport gets absorbed before it reaches your equipment. This is what separates a shock mount case from a standard rack box. The shell takes the hit and the gear inside rides it out, which is exactly what sensitive electronics need when they travel week after week.

2 Sliding Slam Doors Two sliding slam doors give you fast access to the rack. There are no loose lids to carry off, stack in a corner, or lose track of backstage. Open the doors, make your connections or adjustments, and close them up again when the show is over. During a tight changeover that speed is the difference between being ready on time and holding up the stage.

4" Caster Wheels Four 4" caster wheels sit at the base of the case and carry the load across loading docks, ramps, and stage floors. One person can roll a fully loaded rack into position without lifting it, which protects both the gear and your back.

ProX Limited Lifetime Warranty The ProX XS-SLAM10U24 is backed by the ProX Limited Lifetime Warranty, covering the case in full. Moving parts such as casters are covered for 365 days from the date of purchase.

Rack gear shown in photos is not included.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-SLAM10U24 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• 10U Vertical Shock Mount Rack sized for amp racks, effects racks, and mixer combo racks
• Signature Honeycomb Digital™ Laminate exterior for a scuff resistant, professional finish
• 24" Front to Rear Rail Depth supports deep rack gear at both ends
• Shock Mount Suspension with 4 shockproof mounts on each of both racks to absorb transport vibration and impact
• 2 Sliding Slam Doors for fast access with no loose lids to store
• 4" of Extra Clearance between rack and door on both sides for larger mixers and connected cables
• Doors Close with Cables Attached so the rack can stay wired between shows
• 4x 4" Caster Wheels for easy one person rolling
• Compact Footprint fits truck packs and tight backstage areas
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.