Rolling Workstation Production Desk Road Case with 12U Rack and Drawers

Overview

Introducing the ProX XS-PRODESK6030 Mobile Production Desk Flight Case Workstation, a rolling command post for FOH engineers, video and lighting techs, production managers and mobile DJs. It's built for anyone tired of building a work area out of folding tables and loose road cases at every gig. It rolls in as one closed case, opens into a full 60" x 30" work surface with 12U of rack space and four drawers, and packs back down just as fast at load out. Your laptop, rack gear, cables and tools all live in one place and travel together. Nothing gets left behind, and setup starts the minute you hit the floor.

Signature Honeycomb Digital™ Shell The ProX PRODESK6030 is built in the ATA 300 style on Signature Series certified 3/8" laminated plywood, with every panel CNC cut for a tight, consistent fit. All exterior surfaces are covered in Signature Honeycomb Digital™ black hex pattern laminate, a finish ProX created in 2009 inspired by New York City manhole covers. The textured pattern hides the scuffs and minor scratches that make smooth laminate look beat up after a few months of truck packs. On a piece that sits front and center at FOH or in view of a client, looking sharp matters.

Hardware Built for Load In and Load Out Heavy-duty steel ball corners protect every corner of the case, which is where cases take the hardest hits on ramps, dock plates and truck walls. Industrial strength latches are mounted with dual anchor rivets, so the stress is spread across two points instead of one. Closed and latched, the drawers, rack gear and work surface are all sealed inside and protected in transit.

Exterior Size and Weight The case has a 32" x 32" footprint and weighs 233 lbs empty. The square footprint keeps it easy to roll into a tight mix position, and it ships as a single piece by LTL freight.

Work Surface and Fold-Out Side Tables The main work surface of the ProX PRODESK6030 measures a full 60" x 30", the size of a real office desk. Two quick release fold-out side tables add even more room on both sides for a second laptop, a controller or paperwork. They fold flat when you don't need them, so they stay out of the way.

Four Ball-Bearing Drawers Four drawers in two sizes ride on ball bearing slides, so they open smoothly even when they're loaded with cable, adapters and tools. The larger drawers handle coiled cables, power strips and gaffer tape. The smaller ones keep wireless receivers, DI boxes, adapters and hand tools organized and easy to find. When something goes wrong mid show, you open a drawer instead of digging through a tote.

12U Rack Space, Loadable From Either Side The built-in 12U rack can be loaded from either side of the unit. You can face the rack toward the stage, toward the operator or toward the back of the position, depending on how the room is laid out, and reach your processors, playback or network gear without tearing down the workstation. If you only need drawer storage without a rack, the ProX XS-7DTW 7 drawer utility case is the simpler option. The ProX PRODESK6030 is for when the desk, the rack and the storage all need to roll in together.

Eco Friendly Foam The foam used in the ProX PRODESK6030 contains 70% recycled content. 80% of that comes from recycled plastic bottles and 20% from post industrial material.

Recessed Handles Recessed spring loaded handles sit flush with the case sides, so nothing sticks out to catch on truck walls or door frames. At 233 lbs empty, plan on at least two people for any lift onto a stage or into a truck.

4" Locking Casters The ProX PRODESK6030 rolls on four 4" heavy-duty casters, two of them locking. Roll it across the dock, the ballroom carpet or the backstage concrete, then lock it down so it stays put while you work all night.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX PRODESK6030 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• ATA-300 Style workstation built on Signature Series certified laminated 3/8" (9.5 mm) plywood
• Signature Honeycomb Digital™ black hex pattern laminate on all exterior shell surfaces
• Heavy-duty steel ball corners at every structural point for maximum protection during transport
• Industrial-strength latches with dual anchor rivets keep the case secured on the move
• Six recessed spring-loaded handles per side for comfortable two-person lifting
• Four 4" (102 mm) heavy-duty casters, two locking, for smooth controlled mobility
• Full 60" x 30" tabletop work surface for event prep, gear layout, and on-site use
• Two fold-out side tables with quick-release design for expanded workspace on both sides
• 12U rack space loadable from either side for flexible positioning
• Four ball-bearing slide drawers in two sizes for organized storage of cables, connectors, and electronics
• CNC-manufactured panels for consistent, tight tolerances throughout the build
• Eco-friendly foam contains 70% recycled content (80% recycled plastic bottles, 20% post-industrial material)
• ProX Limited Lifetime Warranty included

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XS-PRODESK6030 Mobile Production Desk Flight Case Workstation, a rolling command post for FOH engineers, video and lighting techs, production managers and mobile DJs. It's built for anyone tired of building a work area out of folding tables and loose road cases at every gig. It rolls in as one closed case, opens into a full 60" x 30" work surface with 12U of rack space and four drawers, and packs back down just as fast at load out. Your laptop, rack gear, cables and tools all live in one place and travel together. Nothing gets left behind, and setup starts the minute you hit the floor.

Signature Honeycomb Digital™ Shell The ProX PRODESK6030 is built in the ATA 300 style on Signature Series certified 3/8" laminated plywood, with every panel CNC cut for a tight, consistent fit. All exterior surfaces are covered in Signature Honeycomb Digital™ black hex pattern laminate, a finish ProX created in 2009 inspired by New York City manhole covers. The textured pattern hides the scuffs and minor scratches that make smooth laminate look beat up after a few months of truck packs. On a piece that sits front and center at FOH or in view of a client, looking sharp matters.

Hardware Built for Load In and Load Out Heavy-duty steel ball corners protect every corner of the case, which is where cases take the hardest hits on ramps, dock plates and truck walls. Industrial strength latches are mounted with dual anchor rivets, so the stress is spread across two points instead of one. Closed and latched, the drawers, rack gear and work surface are all sealed inside and protected in transit.

Exterior Size and Weight The case has a 32" x 32" footprint and weighs 233 lbs empty. The square footprint keeps it easy to roll into a tight mix position, and it ships as a single piece by LTL freight.

Work Surface and Fold-Out Side Tables The main work surface of the ProX PRODESK6030 measures a full 60" x 30", the size of a real office desk. Two quick release fold-out side tables add even more room on both sides for a second laptop, a controller or paperwork. They fold flat when you don't need them, so they stay out of the way.

Four Ball-Bearing Drawers Four drawers in two sizes ride on ball bearing slides, so they open smoothly even when they're loaded with cable, adapters and tools. The larger drawers handle coiled cables, power strips and gaffer tape. The smaller ones keep wireless receivers, DI boxes, adapters and hand tools organized and easy to find. When something goes wrong mid show, you open a drawer instead of digging through a tote.

12U Rack Space, Loadable From Either Side The built-in 12U rack can be loaded from either side of the unit. You can face the rack toward the stage, toward the operator or toward the back of the position, depending on how the room is laid out, and reach your processors, playback or network gear without tearing down the workstation. If you only need drawer storage without a rack, the ProX XS-7DTW 7 drawer utility case is the simpler option. The ProX PRODESK6030 is for when the desk, the rack and the storage all need to roll in together.

Eco Friendly Foam The foam used in the ProX PRODESK6030 contains 70% recycled content. 80% of that comes from recycled plastic bottles and 20% from post industrial material.

Recessed Handles Recessed spring loaded handles sit flush with the case sides, so nothing sticks out to catch on truck walls or door frames. At 233 lbs empty, plan on at least two people for any lift onto a stage or into a truck.

4" Locking Casters The ProX PRODESK6030 rolls on four 4" heavy-duty casters, two of them locking. Roll it across the dock, the ballroom carpet or the backstage concrete, then lock it down so it stays put while you work all night.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX PRODESK6030 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• ATA-300 Style workstation built on Signature Series certified laminated 3/8" (9.5 mm) plywood
• Signature Honeycomb Digital™ black hex pattern laminate on all exterior shell surfaces
• Heavy-duty steel ball corners at every structural point for maximum protection during transport
• Industrial-strength latches with dual anchor rivets keep the case secured on the move
• Six recessed spring-loaded handles per side for comfortable two-person lifting
• Four 4" (102 mm) heavy-duty casters, two locking, for smooth controlled mobility
• Full 60" x 30" tabletop work surface for event prep, gear layout, and on-site use
• Two fold-out side tables with quick-release design for expanded workspace on both sides
• 12U rack space loadable from either side for flexible positioning
• Four ball-bearing slide drawers in two sizes for organized storage of cables, connectors, and electronics
• CNC-manufactured panels for consistent, tight tolerances throughout the build
• Eco-friendly foam contains 70% recycled content (80% recycled plastic bottles, 20% post-industrial material)
• ProX Limited Lifetime Warranty included

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.