ATA Flight Case For Denon PRIME 4 G2/PRIME 4 MK2 DJ Controller with 1U Rack Space and Wheels

Overview

Introducing the ProX XS-PRIME4WBLMK2 ATA Flight Case for Denon PRIME 4 G2 and PRIME 4 MK2 DJ Controller with 1U Rack Space and Wheels. Your PRIME 4 is the center of your whole show. It holds your library, your mixer, your screen and your workflow in one unit, so if it takes a hard hit in the van or gets knocked off a loading dock, the gig is over before it starts. The ProX PRIME4 MK2 was built to stop that from happening. It locks your standalone DJ system inside a tough 3/8" plywood shell with a custom foam fit, adds a 1U rack space right below the controller for your extra gear, and rolls on its own wheels so you are not hauling it across a parking lot by hand. And with the removable front panel, you can reach the front controls, headphone and mic jacks, and the rack space without pulling the controller out of the case.

Signature Honeycomb Digital™ Black on Black Finish Every shell surface is covered in Signature Honeycomb Digital™ laminate, a hexagon grid pattern ProX designed in 2009 based on New York City manhole covers, which are made to handle punishment every single day. The textured surface helps prevent the minor to mild scratches that pile up on standard laminated cases, so your case still looks sharp after a full season of gigs. Paired with the premium Black on Black design, it gives your setup a clean, professional look in any venue.

ATA 300 Style Construction The ProX PRIME4 MK2 is built in the ATA 300 style from 3/8" plywood, and every ProX case is cut with CNC machines to hold the tight tolerances ProX has been known for since 1984. Dual anchor rivets keep the hardware locked in place, and an aluminum tongue and groove lines up the lid and body for an easy, secure close every time. Outside, the case measures 9"H x 23"W x 31"L and weighs 33 lbs.

Heavy Duty Steel Ball Corners ProX steel ball corners guard the edges that take the most abuse, whether the case gets bumped in a hallway or knocked around in a trailer. They absorb the impact at the weakest points so the shell, and the controller inside, stay protected.

Recessed Butterfly Twist Lock Latches ProX branded industrial recessed butterfly twist lock latches keep the case shut tight in transit. They are padlock ready, so you can add extra security when your gear sits in a venue or a vehicle. Since they sit recessed in the shell, they are less likely to catch on other cases when you load in.

Spring Action Recessed Handles ProX branded spring action recessed handles with padded grips fold back flat when you let go. That keeps them out of the way during transport and gives you a solid, comfortable grip when it is time to lift the case into a vehicle or onto a table.

Removable Front Panel The front panel comes off to give you direct access to the 1U rack space, the controller’s front controls, and the headphone and mic jacks. So you can plug in headphones, run a mic, or adjust your rack unit without unpacking anything.

1U Rack Space Below the Controller A 1U rack space sits right under the PRIME 4, and the 1U rail hardware is included. That gives you a spot for a wireless receiver, a power conditioner, or another 1U device, which means fewer extra cases to carry and your core gear all in one place.

Custom Foam Interior Inside, high density foam supports and cushions the controller in a dedicated compartment measuring 3.50"H x 17"W x 28.50"L. There is extra room behind and underneath the unit for cables and small accessories, so everything you need for the gig travels together. The foam ProX uses contains 70% recycled content, and 80% of that comes from recycled plastic bottles.

Low Profile Wheels and Rubber Feet Two low profile rubber wheels let you tip the case and roll it from the van to the booth, which saves your back on long walks from the parking lot. Four industrial grade rubber feet keep it steady when it is set down, so it stays put on a stage or a truck floor.

Complete Your DJ Setup Pair the ProX PRIME4 MK2 with the ProX XF-MESAMK2 Mesa MK2 DJ Facade Table Station or the ProX XS-ZTABLE Z-Table Folding DJ Table Mobile Workstation for a clean, professional booth from load in to last song.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX PRIME4 MK2 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

All ProX cases use CNC technology, during the manufacturing process, to assure that cases are consistently built with strict specifications and tolerances that are required for the high-quality standards that ProX cases have been known for since 1984.

Note: Any pictured device is shown for reference only and not included!

• Fits Denon PRIME 4 G2 and PRIME 4 MK2 Custom fit compartment for the standalone DJ system
• Signature Honeycomb Digital™ Laminate Hexagon grid surface on all shell panels helps resist minor to mild scratches
• Premium Black on Black Design Clean, professional look in any venue
• ATA 300 Style Case Built from 3/8" plywood, CNC cut to tight tolerances
• Heavy Duty Steel Ball Corners Edge protection where impacts hit hardest
• Aluminum Tongue and Groove Easy locking fit between lid and body
• Dual Anchor Rivets Secure hardware mounting
• Recessed Butterfly Twist Lock Latches ProX branded, industrial grade, padlock ready
• Spring Action Recessed Handles ProX branded, padded grips, fold flat when not in use
• Removable Front Panel Access to the 1U rack space, front controls, and headphone and mic jacks
• 1U Rack Space Below Device 1U rail hardware included
• High Density Foam Interior Supports and cushions the controller, made with 70% recycled content
• Accessory Storage Extra room behind and below the unit for cables and small accessories
• 2 Low Profile Rubber Wheels Roll the case instead of carrying it
• 4 Industrial Grade Rubber Feet Stable footing when set down
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

 ProX Goes Green: The durable hard rubber foams used in our cases contain 70% recycled content. Of that 70%, 80% of it comes from recycled plastic bottles and the remaining 20% from recycled post-industrial material. At ProX we strive to make the world a better place!

Denon® PRIME 4

Compatibility

Denon® PRIME 4

Product details

Introducing the ProX XS-PRIME4WBLMK2 ATA Flight Case for Denon PRIME 4 G2 and PRIME 4 MK2 DJ Controller with 1U Rack Space and Wheels. Your PRIME 4 is the center of your whole show. It holds your library, your mixer, your screen and your workflow in one unit, so if it takes a hard hit in the van or gets knocked off a loading dock, the gig is over before it starts. The ProX PRIME4 MK2 was built to stop that from happening. It locks your standalone DJ system inside a tough 3/8" plywood shell with a custom foam fit, adds a 1U rack space right below the controller for your extra gear, and rolls on its own wheels so you are not hauling it across a parking lot by hand. And with the removable front panel, you can reach the front controls, headphone and mic jacks, and the rack space without pulling the controller out of the case.

Signature Honeycomb Digital™ Black on Black Finish Every shell surface is covered in Signature Honeycomb Digital™ laminate, a hexagon grid pattern ProX designed in 2009 based on New York City manhole covers, which are made to handle punishment every single day. The textured surface helps prevent the minor to mild scratches that pile up on standard laminated cases, so your case still looks sharp after a full season of gigs. Paired with the premium Black on Black design, it gives your setup a clean, professional look in any venue.

ATA 300 Style Construction The ProX PRIME4 MK2 is built in the ATA 300 style from 3/8" plywood, and every ProX case is cut with CNC machines to hold the tight tolerances ProX has been known for since 1984. Dual anchor rivets keep the hardware locked in place, and an aluminum tongue and groove lines up the lid and body for an easy, secure close every time. Outside, the case measures 9"H x 23"W x 31"L and weighs 33 lbs.

Heavy Duty Steel Ball Corners ProX steel ball corners guard the edges that take the most abuse, whether the case gets bumped in a hallway or knocked around in a trailer. They absorb the impact at the weakest points so the shell, and the controller inside, stay protected.

Recessed Butterfly Twist Lock Latches ProX branded industrial recessed butterfly twist lock latches keep the case shut tight in transit. They are padlock ready, so you can add extra security when your gear sits in a venue or a vehicle. Since they sit recessed in the shell, they are less likely to catch on other cases when you load in.

Spring Action Recessed Handles ProX branded spring action recessed handles with padded grips fold back flat when you let go. That keeps them out of the way during transport and gives you a solid, comfortable grip when it is time to lift the case into a vehicle or onto a table.

Removable Front Panel The front panel comes off to give you direct access to the 1U rack space, the controller’s front controls, and the headphone and mic jacks. So you can plug in headphones, run a mic, or adjust your rack unit without unpacking anything.

1U Rack Space Below the Controller A 1U rack space sits right under the PRIME 4, and the 1U rail hardware is included. That gives you a spot for a wireless receiver, a power conditioner, or another 1U device, which means fewer extra cases to carry and your core gear all in one place.

Custom Foam Interior Inside, high density foam supports and cushions the controller in a dedicated compartment measuring 3.50"H x 17"W x 28.50"L. There is extra room behind and underneath the unit for cables and small accessories, so everything you need for the gig travels together. The foam ProX uses contains 70% recycled content, and 80% of that comes from recycled plastic bottles.

Low Profile Wheels and Rubber Feet Two low profile rubber wheels let you tip the case and roll it from the van to the booth, which saves your back on long walks from the parking lot. Four industrial grade rubber feet keep it steady when it is set down, so it stays put on a stage or a truck floor.

Complete Your DJ Setup Pair the ProX PRIME4 MK2 with the ProX XF-MESAMK2 Mesa MK2 DJ Facade Table Station or the ProX XS-ZTABLE Z-Table Folding DJ Table Mobile Workstation for a clean, professional booth from load in to last song.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX PRIME4 MK2 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

All ProX cases use CNC technology, during the manufacturing process, to assure that cases are consistently built with strict specifications and tolerances that are required for the high-quality standards that ProX cases have been known for since 1984.

Note: Any pictured device is shown for reference only and not included!

Key features

• Fits Denon PRIME 4 G2 and PRIME 4 MK2 Custom fit compartment for the standalone DJ system
• Signature Honeycomb Digital™ Laminate Hexagon grid surface on all shell panels helps resist minor to mild scratches
• Premium Black on Black Design Clean, professional look in any venue
• ATA 300 Style Case Built from 3/8" plywood, CNC cut to tight tolerances
• Heavy Duty Steel Ball Corners Edge protection where impacts hit hardest
• Aluminum Tongue and Groove Easy locking fit between lid and body
• Dual Anchor Rivets Secure hardware mounting
• Recessed Butterfly Twist Lock Latches ProX branded, industrial grade, padlock ready
• Spring Action Recessed Handles ProX branded, padded grips, fold flat when not in use
• Removable Front Panel Access to the 1U rack space, front controls, and headphone and mic jacks
• 1U Rack Space Below Device 1U rail hardware included
• High Density Foam Interior Supports and cushions the controller, made with 70% recycled content
• Accessory Storage Extra room behind and below the unit for cables and small accessories
• 2 Low Profile Rubber Wheels Roll the case instead of carrying it
• 4 Industrial Grade Rubber Feet Stable footing when set down
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

 ProX Goes Green: The durable hard rubber foams used in our cases contain 70% recycled content. Of that 70%, 80% of it comes from recycled plastic bottles and the remaining 20% from recycled post-industrial material. At ProX we strive to make the world a better place!