ATA Flight Style Road Case 24" in. Aluminum 8mm F34 F32 F31 Truss Base Plates - Fits 6x

Overview

Introducing the ProX XS-6XBP2424 ATA Flight Style Road Case for 6x 24" Aluminum 8mm Truss Base Plates. Base plates are the foundation of every truss build, and they are also some of the heaviest, most awkward pieces on the truck. Stack six of them loose and you end up with scratched finishes, dinged edges, scuffed vehicle floors, and a crew that dreads load out. The ProX XS-6XBP2424 fixes that. It holds six 24" x 24" aluminum base plates used with F34, F32, and F31 truss systems, each one set in its own aligned slot, inside an ATA 300 style road case that one person can roll from the trailer to the stage. For rental companies, production crews, and touring techs who put up ground support on a regular basis, this is the simple way to keep your plates organized, protected, and moving fast.

Rugged ATA 300 Style Construction The shell is built from Signature Series certified laminated Gig-Ready™ 3/8" plywood and finished in a black Signature Honeycomb Digital™ exterior with silver trim. Dual anchor rivets reinforce the build so hardware stays tight through years of loading, unloading, and stacking. It is made for the real abuse of shop floors, loading docks, and box trucks, not just the trip from the warehouse to the first gig.

Compact Footprint The case measures 26"H x 17"W x 25.5"L and weighs 59 lbs empty. Because the plates ride upright, six full size base plates take up less floor space than a single 24" x 24" plate laid flat. That frees up room in the truck pack for truss, lighting, and everything else the show needs.

Slotted Foam Interior Inside, each plate drops into its own aligned slot, so the plates stand upright, stay separated, and never slide against each other in transit. High density foam supports and cushions every slot, which protects the aluminum finish and keeps the load from shifting when the truck brakes or turns. The foam padding is made from 85% recycled materials.

Steel Ball Corners Heavy steel ball corners guard the most impact prone points on the case. Corners take the hits when a case gets bumped against a ramp, dropped off a lift gate, or stacked in a hurry, and these help keep the plywood shell intact for the long haul.

Removable Top with Locking Latches The top lifts off completely for clear access, so pulling plates at the venue and loading them back after the show goes quickly. Tongue and groove edges line the lid up with the base for a tight locking fit, and industrial recessed butterfly twist lock latches hold it shut. The latches can be padlocked, which adds security when gear sits in a shared warehouse or venue overnight.

Recessed Spring Action Handles Recessed spring action handles on the sides give you solid grab points for lifting the case on and off a truck. Since they sit flush when not in use, they won’t snag on other cases or eat up space in a tight truck pack.

4" Industrial Grade Casters Four heavy duty 4" casters with tough rubber wheels let a single person roll the loaded case across a venue floor or down a hallway. Two of the casters lock, so the case stays put while you load and unload plates.

Complete Your Base Plate Kit Base plates are not included and are sold separately. Pair the ProX XS-6XBP2424 with six of the ProX XT-BP2424A 24" x 24" 8mm Aluminum Base Plate, which includes conical connectors for F34 trussing, and you have a complete ground support base plate kit that packs, ships, and stores as one unit.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-6XBP2424 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Holds 6x 24" x 24" Aluminum 8mm Base Plates for F34, F32, and F31 truss systems
• ATA 300 Style Road Case built for heavy, repeated transport
• Signature Honeycomb Digital™ Exterior in black with silver trim
• Signature Series Certified 3/8" Laminated Gig-Ready™ Plywood shell
• Heavy Steel Ball Corners protect the most impact prone points
• Dual Anchor Rivets reinforce the build
• Removable Top for full, clear access to every plate
• Tongue and Groove Edges for a tight, locking lid fit
• Industrial Recessed Butterfly Twist Lock Latches that can be padlocked
• Recessed Spring Action Handles on the sides sit flush when not in use
• Aligned Interior Slots keep each plate upright and separated
• High Density Foam Interior support and cushioning
• Eco Conscious Foam padding made from 85% recycled materials
• 4x Heavy Duty 4" Casters with tough rubber wheels, two locking
• Industrial Grade Rubber Feet
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Fits up to 6x XT-BP2424A (8mm) Base Plates

Compatibility

Fits up to 6x XT-BP2424A (8mm) Base Plates

Product details

Introducing the ProX XS-6XBP2424 ATA Flight Style Road Case for 6x 24" Aluminum 8mm Truss Base Plates. Base plates are the foundation of every truss build, and they are also some of the heaviest, most awkward pieces on the truck. Stack six of them loose and you end up with scratched finishes, dinged edges, scuffed vehicle floors, and a crew that dreads load out. The ProX XS-6XBP2424 fixes that. It holds six 24" x 24" aluminum base plates used with F34, F32, and F31 truss systems, each one set in its own aligned slot, inside an ATA 300 style road case that one person can roll from the trailer to the stage. For rental companies, production crews, and touring techs who put up ground support on a regular basis, this is the simple way to keep your plates organized, protected, and moving fast.

Rugged ATA 300 Style Construction The shell is built from Signature Series certified laminated Gig-Ready™ 3/8" plywood and finished in a black Signature Honeycomb Digital™ exterior with silver trim. Dual anchor rivets reinforce the build so hardware stays tight through years of loading, unloading, and stacking. It is made for the real abuse of shop floors, loading docks, and box trucks, not just the trip from the warehouse to the first gig.

Compact Footprint The case measures 26"H x 17"W x 25.5"L and weighs 59 lbs empty. Because the plates ride upright, six full size base plates take up less floor space than a single 24" x 24" plate laid flat. That frees up room in the truck pack for truss, lighting, and everything else the show needs.

Slotted Foam Interior Inside, each plate drops into its own aligned slot, so the plates stand upright, stay separated, and never slide against each other in transit. High density foam supports and cushions every slot, which protects the aluminum finish and keeps the load from shifting when the truck brakes or turns. The foam padding is made from 85% recycled materials.

Steel Ball Corners Heavy steel ball corners guard the most impact prone points on the case. Corners take the hits when a case gets bumped against a ramp, dropped off a lift gate, or stacked in a hurry, and these help keep the plywood shell intact for the long haul.

Removable Top with Locking Latches The top lifts off completely for clear access, so pulling plates at the venue and loading them back after the show goes quickly. Tongue and groove edges line the lid up with the base for a tight locking fit, and industrial recessed butterfly twist lock latches hold it shut. The latches can be padlocked, which adds security when gear sits in a shared warehouse or venue overnight.

Recessed Spring Action Handles Recessed spring action handles on the sides give you solid grab points for lifting the case on and off a truck. Since they sit flush when not in use, they won’t snag on other cases or eat up space in a tight truck pack.

4" Industrial Grade Casters Four heavy duty 4" casters with tough rubber wheels let a single person roll the loaded case across a venue floor or down a hallway. Two of the casters lock, so the case stays put while you load and unload plates.

Complete Your Base Plate Kit Base plates are not included and are sold separately. Pair the ProX XS-6XBP2424 with six of the ProX XT-BP2424A 24" x 24" 8mm Aluminum Base Plate, which includes conical connectors for F34 trussing, and you have a complete ground support base plate kit that packs, ships, and stores as one unit.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-6XBP2424 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Holds 6x 24" x 24" Aluminum 8mm Base Plates for F34, F32, and F31 truss systems
• ATA 300 Style Road Case built for heavy, repeated transport
• Signature Honeycomb Digital™ Exterior in black with silver trim
• Signature Series Certified 3/8" Laminated Gig-Ready™ Plywood shell
• Heavy Steel Ball Corners protect the most impact prone points
• Dual Anchor Rivets reinforce the build
• Removable Top for full, clear access to every plate
• Tongue and Groove Edges for a tight, locking lid fit
• Industrial Recessed Butterfly Twist Lock Latches that can be padlocked
• Recessed Spring Action Handles on the sides sit flush when not in use
• Aligned Interior Slots keep each plate upright and separated
• High Density Foam Interior support and cushioning
• Eco Conscious Foam padding made from 85% recycled materials
• 4x Heavy Duty 4" Casters with tough rubber wheels, two locking
• Industrial Grade Rubber Feet
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.