25 Ft. DMX XLR3-M to XLR3-F Premium Cable

Overview

Introducing the ProX XCP-DMX25 25 Ft. DMX XLR3-M to XLR3-F Premium Cable, the long-run workhorse of the XCP-DMX series and the cable you reach for when the distance between your controller and your furthest fixture actually matters. At 25 ft., the ProX XCP-DMX25 is built for the kinds of setups where shorter cables simply run out of room: console-to-dimmer rack runs on a wide stage, fixture chains stretched across a full truss grid, lighting drops from an upper catwalk position to a floor-mounted device, or any permanent install where running cable through conduit requires real length. This is the cable that lets you design your rig layout around what works best for your production, not around where you happen to have cable left.

DMX-Specific Engineering at a Length Where It Counts At 25 ft., the electrical characteristics of your DMX cable matter more than they do at 3 or 5 ft. DMX protocol operates at a nominal impedance of 110 ohms, and as cable runs get longer, impedance mismatches from using non-DMX cable become a bigger problem: signal degradation increases, fixture response becomes less reliable, and diagnosing issues across a longer chain gets exponentially harder. The ProX XCP-DMX25 is purpose-built for DMX from the start, ensuring the correct impedance and shielding characteristics are maintained across the full 25 ft. run.

OFC Conductors and Braided Copper Shield The XCP-DMX25 is built around 22 AWG oxygen-free copper (OFC) conductors paired with a braided OFC copper compact shield. At 25 ft., you are running more cable through more of the venue, which means more exposure to interference sources: power distribution runs, audio snakes, dimmer packs, and architectural electrical systems. The braided copper shield actively blocks that interference across the entire length of the cable, keeping your DMX data clean and your fixtures responding exactly as programmed.

All-Metal XLR Connectors with Silver Plated Contacts Both ends of the ProX XCP-DMX25 feature ProX branded, all-metal XLR connectors with silver plated contacts. The all-metal housing is built for the physical demands of field use, holding up through repeated connect-disconnect cycles without loosening or cracking. Silver plated contacts resist corrosion and maintain a consistent, low-resistance connection, which is especially important at longer cable runs where any connector-level resistance adds to the total signal path.

Flexible Construction for Real-World Routing Twenty-five feet of cable has to be manageable in the field. The jacket on the ProX XCP-DMX25 stays flexible enough to route through tight runs, over truss, through conduit, and back into a cable bag without stiffening or developing stress fatigue near the connectors. It coils cleanly and holds its shape through repeated use across a full production season.

Available in 10 or 50 Cable Master Box Quantities The XCP-DMX25 is available in master box configurations of 10 or 50 cables, making it a practical choice for dealers, rental houses, AV integrators, and install contractors who need to stock longer-run DMX cable in volume.

Compatibility Note Twisted pair DMX data cables like the ProX XCP-DMX25 are not suitable for audio use. Audio cables are equally not suitable for DMX. Their specifications and characteristics differ substantially. Always use the correct cable type for reliable, stable connections.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XCP-DMX25 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

NOTE: Twisted pair DMX data transmission cables are not suitable for audio use.  Conversely, audio cables are not suitable for DMX data use.   Their specifications and characteristics differ substantially.   Always use the correct cable for reliable connections!

• DMX-Specific Design: Engineered for DMX data transmission at 110-ohm nominal impedance across the full 25 ft. run
• 22 AWG OFC Conductors: Oxygen-free copper conductors deliver clean DMX data transfer with minimal signal loss across the run
• Braided OFC Copper Shield: Compact braided shield blocks interference across the entire cable length in busy stage and venue environments
• All-Metal XLR Connectors: ProX branded, all-metal construction on both ends for durability through repeated field use
• Silver Plated Contacts: Corrosion-resistant contacts maintain consistent, low-resistance connections over time
• 25 Ft. Length: Ideal for long console-to-dimmer runs, wide truss fixture chains, catwalk drops, and permanent venue installs
• Flexible, Durable Build: Jacket stays manageable and coils cleanly through repeated routing and storage
• XLR3-M to XLR3-F: Standard 3-pin male to female configuration for universal DMX device compatibility
• Not for Audio Use: Twisted pair DMX cable is not suitable for audio applications; always match cable type to protocol
• Master Box: 10 or 50 Cables
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

DMX XLR3-M to XLR3-F

Compatibility

DMX XLR3-M to XLR3-F

Product details

Introducing the ProX XCP-DMX25 25 Ft. DMX XLR3-M to XLR3-F Premium Cable, the long-run workhorse of the XCP-DMX series and the cable you reach for when the distance between your controller and your furthest fixture actually matters. At 25 ft., the ProX XCP-DMX25 is built for the kinds of setups where shorter cables simply run out of room: console-to-dimmer rack runs on a wide stage, fixture chains stretched across a full truss grid, lighting drops from an upper catwalk position to a floor-mounted device, or any permanent install where running cable through conduit requires real length. This is the cable that lets you design your rig layout around what works best for your production, not around where you happen to have cable left.

DMX-Specific Engineering at a Length Where It Counts At 25 ft., the electrical characteristics of your DMX cable matter more than they do at 3 or 5 ft. DMX protocol operates at a nominal impedance of 110 ohms, and as cable runs get longer, impedance mismatches from using non-DMX cable become a bigger problem: signal degradation increases, fixture response becomes less reliable, and diagnosing issues across a longer chain gets exponentially harder. The ProX XCP-DMX25 is purpose-built for DMX from the start, ensuring the correct impedance and shielding characteristics are maintained across the full 25 ft. run.

OFC Conductors and Braided Copper Shield The XCP-DMX25 is built around 22 AWG oxygen-free copper (OFC) conductors paired with a braided OFC copper compact shield. At 25 ft., you are running more cable through more of the venue, which means more exposure to interference sources: power distribution runs, audio snakes, dimmer packs, and architectural electrical systems. The braided copper shield actively blocks that interference across the entire length of the cable, keeping your DMX data clean and your fixtures responding exactly as programmed.

All-Metal XLR Connectors with Silver Plated Contacts Both ends of the ProX XCP-DMX25 feature ProX branded, all-metal XLR connectors with silver plated contacts. The all-metal housing is built for the physical demands of field use, holding up through repeated connect-disconnect cycles without loosening or cracking. Silver plated contacts resist corrosion and maintain a consistent, low-resistance connection, which is especially important at longer cable runs where any connector-level resistance adds to the total signal path.

Flexible Construction for Real-World Routing Twenty-five feet of cable has to be manageable in the field. The jacket on the ProX XCP-DMX25 stays flexible enough to route through tight runs, over truss, through conduit, and back into a cable bag without stiffening or developing stress fatigue near the connectors. It coils cleanly and holds its shape through repeated use across a full production season.

Available in 10 or 50 Cable Master Box Quantities The XCP-DMX25 is available in master box configurations of 10 or 50 cables, making it a practical choice for dealers, rental houses, AV integrators, and install contractors who need to stock longer-run DMX cable in volume.

Compatibility Note Twisted pair DMX data cables like the ProX XCP-DMX25 are not suitable for audio use. Audio cables are equally not suitable for DMX. Their specifications and characteristics differ substantially. Always use the correct cable type for reliable, stable connections.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XCP-DMX25 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

NOTE: Twisted pair DMX data transmission cables are not suitable for audio use.  Conversely, audio cables are not suitable for DMX data use.   Their specifications and characteristics differ substantially.   Always use the correct cable for reliable connections!

Key features

• DMX-Specific Design: Engineered for DMX data transmission at 110-ohm nominal impedance across the full 25 ft. run
• 22 AWG OFC Conductors: Oxygen-free copper conductors deliver clean DMX data transfer with minimal signal loss across the run
• Braided OFC Copper Shield: Compact braided shield blocks interference across the entire cable length in busy stage and venue environments
• All-Metal XLR Connectors: ProX branded, all-metal construction on both ends for durability through repeated field use
• Silver Plated Contacts: Corrosion-resistant contacts maintain consistent, low-resistance connections over time
• 25 Ft. Length: Ideal for long console-to-dimmer runs, wide truss fixture chains, catwalk drops, and permanent venue installs
• Flexible, Durable Build: Jacket stays manageable and coils cleanly through repeated routing and storage
• XLR3-M to XLR3-F: Standard 3-pin male to female configuration for universal DMX device compatibility
• Not for Audio Use: Twisted pair DMX cable is not suitable for audio applications; always match cable type to protocol
• Master Box: 10 or 50 Cables
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.