10 Ft. DMX XLR3-M to XLR3-F Premium Cable

Overview

Introducing the ProX XCP-DMX10 10 Ft. DMX XLR3-M to XLR3-F Premium Cable, the most versatile length in the XCP-DMX series and the cable that belongs in every working DJ bag, lighting kit, and venue install package. At 10 ft., the ProX XCP-DMX10 handles the runs that 3 ft. and 5 ft. cables can't reach: controller-to-first-fixture drops, cross-stage hops between fixtures on a ground row, moving head chains across a wider truss span, or any setup where you need a cable that clears real distance without reaching for the 25 ft. option and dealing with excess slack. If you are only stocking one length of DMX cable, 10 ft. is the one.

Built for DMX, Not Borrowed from Audio DMX protocol operates at a nominal impedance of 110 ohms. Standard audio cables do not meet that spec, and running them in a DMX chain causes impedance mismatches that degrade signal quality, trigger erratic fixture behavior, and get harder to diagnose as your chain length grows. The ProX XCP-DMX10 is engineered specifically for DMX data transmission, with the correct electrical characteristics to deliver clean, reliable control from your console to every fixture in the chain.

OFC Conductors and Braided Copper Shield At the core of the XCP-DMX10 are 22AWG oxygen-free copper (OFC) conductors paired with a braided OFC copper compact shield. At 10 ft., cable routing gets more complex, which means more opportunities for outside interference from nearby power runs, audio snakes, and other signal cables sharing the same path. The braided shield actively blocks that noise, keeping your DMX data intact from one end of the cable to the other regardless of what else is running in the same conduit or cable bundle.

All-Metal XLR Connectors with Silver Plated Contacts Both ends feature ProX branded, all-metal XLR connectors with silver plated contacts. The all-metal housing holds up through the repeated connect-disconnect cycles that a working DMX cable sees across a season of gigs, installs, and teardowns. Silver plated contacts resist corrosion and maintain a consistent, low-resistance connection over time, which matters more at longer lengths where any connector-level resistance compounds along the chain.

Flexible Construction That Holds Up in the Field The jacket on the ProX XCP-DMX10 is built to stay flexible and manageable at a length where stiff cable becomes a real practical problem. It coils cleanly, routes without fighting you, and holds up through repeated use without stiffening or developing jacket fatigue at stress points near the connectors.

Compatibility Note Twisted pair DMX data cables are not suitable for audio use, and audio cables are not suitable for DMX. Their specifications and characteristics differ substantially. Always use DMX-rated cable for DMX runs.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XCP-DMX10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

NOTE: Twisted pair DMX data transmission cables are not suitable for audio use.  Conversely, audio cables are not suitable for DMX data use.   Their specifications and characteristics differ substantially.   Always use the correct cable for reliable connections!

• DMX-Specific Design: Engineered for DMX data transmission at 110-ohm nominal impedance; not a repurposed audio cable
• 22 AWG OFC Conductors: Oxygen-free copper conductors deliver clean DMX data transfer with minimal signal loss across the run
• Braided OFC Copper Shield: Compact braided shield blocks interference and protects DMX data across the full 10 ft. run
• All-Metal XLR Connectors: ProX branded, all-metal construction on both ends built for repeated field use without loosening or cracking
• Silver Plated Contacts: Corrosion-resistant contacts maintain consistent, low-resistance connections over time
• 10 Ft. Length: The most versatile DMX cable length for mobile DJs, touring lighting rigs, and venue installs
• Flexible, Durable Build: Jacket stays manageable and coils cleanly through repeated gig use
• XLR3-M to XLR3-F: Standard 3-pin male to female configuration for universal DMX device compatibility
• Not for Audio Use: Twisted pair DMX cable is not suitable for audio applications; always match cable type to protocol
• Master Box: 10 Cables
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

DMX XLR3-M to XLR3-F

Compatibility

DMX XLR3-M to XLR3-F

Product details

Introducing the ProX XCP-DMX10 10 Ft. DMX XLR3-M to XLR3-F Premium Cable, the most versatile length in the XCP-DMX series and the cable that belongs in every working DJ bag, lighting kit, and venue install package. At 10 ft., the ProX XCP-DMX10 handles the runs that 3 ft. and 5 ft. cables can't reach: controller-to-first-fixture drops, cross-stage hops between fixtures on a ground row, moving head chains across a wider truss span, or any setup where you need a cable that clears real distance without reaching for the 25 ft. option and dealing with excess slack. If you are only stocking one length of DMX cable, 10 ft. is the one.

Built for DMX, Not Borrowed from Audio DMX protocol operates at a nominal impedance of 110 ohms. Standard audio cables do not meet that spec, and running them in a DMX chain causes impedance mismatches that degrade signal quality, trigger erratic fixture behavior, and get harder to diagnose as your chain length grows. The ProX XCP-DMX10 is engineered specifically for DMX data transmission, with the correct electrical characteristics to deliver clean, reliable control from your console to every fixture in the chain.

OFC Conductors and Braided Copper Shield At the core of the XCP-DMX10 are 22AWG oxygen-free copper (OFC) conductors paired with a braided OFC copper compact shield. At 10 ft., cable routing gets more complex, which means more opportunities for outside interference from nearby power runs, audio snakes, and other signal cables sharing the same path. The braided shield actively blocks that noise, keeping your DMX data intact from one end of the cable to the other regardless of what else is running in the same conduit or cable bundle.

All-Metal XLR Connectors with Silver Plated Contacts Both ends feature ProX branded, all-metal XLR connectors with silver plated contacts. The all-metal housing holds up through the repeated connect-disconnect cycles that a working DMX cable sees across a season of gigs, installs, and teardowns. Silver plated contacts resist corrosion and maintain a consistent, low-resistance connection over time, which matters more at longer lengths where any connector-level resistance compounds along the chain.

Flexible Construction That Holds Up in the Field The jacket on the ProX XCP-DMX10 is built to stay flexible and manageable at a length where stiff cable becomes a real practical problem. It coils cleanly, routes without fighting you, and holds up through repeated use without stiffening or developing jacket fatigue at stress points near the connectors.

Compatibility Note Twisted pair DMX data cables are not suitable for audio use, and audio cables are not suitable for DMX. Their specifications and characteristics differ substantially. Always use DMX-rated cable for DMX runs.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XCP-DMX10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

NOTE: Twisted pair DMX data transmission cables are not suitable for audio use.  Conversely, audio cables are not suitable for DMX data use.   Their specifications and characteristics differ substantially.   Always use the correct cable for reliable connections!

Key features

• DMX-Specific Design: Engineered for DMX data transmission at 110-ohm nominal impedance; not a repurposed audio cable
• 22 AWG OFC Conductors: Oxygen-free copper conductors deliver clean DMX data transfer with minimal signal loss across the run
• Braided OFC Copper Shield: Compact braided shield blocks interference and protects DMX data across the full 10 ft. run
• All-Metal XLR Connectors: ProX branded, all-metal construction on both ends built for repeated field use without loosening or cracking
• Silver Plated Contacts: Corrosion-resistant contacts maintain consistent, low-resistance connections over time
• 10 Ft. Length: The most versatile DMX cable length for mobile DJs, touring lighting rigs, and venue installs
• Flexible, Durable Build: Jacket stays manageable and coils cleanly through repeated gig use
• XLR3-M to XLR3-F: Standard 3-pin male to female configuration for universal DMX device compatibility
• Not for Audio Use: Twisted pair DMX cable is not suitable for audio applications; always match cable type to protocol
• Master Box: 10 Cables
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.